Honda Accord Driver side blend door motor change 2003 to 2007 AC or Heat Dont work
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#honda #Blenddoor #acdontwork #accoldoneside #heatdontwork #aircontrolmotor #hondaaccordblenddoormotor #hondaaccordairdoormotor #accordairmixmotor #acnotcold #ac #accontrol #control #2003accordblendoor #2004accordbelnddoor #2005accordblenddoormotor #2006accordblenddoormotor #2007accordblenddoormotor #hondapilotblenddoormotor #hondacivicblenddoormotor #civicblenddoormotor #acmotor #acworkononesideonly #acworksbutnotcold
Great video. I have a problem with this air mixer motor. It was loud like the sound of boiling hot water.
Yeah they make that type of noise as they start to go out
Thank you 👍🏻
You’re welcome 😊
Update in the earlier comment this video help fix my problem thanks
Great video! By chance would you happen to know what the black plastic lever is called that has the zip tie going through it, mine just broke loose on an 03 Accord. 🥲
Not sure what it’s called
thank you for been a good teacher.
what is the size the screw used to hold the actuator? I misplaced one and would need to get a new one
I don’t have that information on side u might have to take out another one and match it
What if I just zip tied the top one and used the 2 screws to hold the bottom? I see you previously zip tied some thing in there
Thank you for the video, I check both sides of the blend door actuators for my 03 Accord v6 ex, and they both work, situation like one side hot and one side cool just happened in those pretty hot days, normally they work ok on both side, is it any ideal comes up in your mind?
Check ac pressure with guages if it’s under 30 with ac running u need to re charge it los refrigeration can also cause partly ac to cool
Nice video here. I have this same issue, where its hot= passenger, warm to cool on driver side& defrost.
I looked at the actuator & its turning the blend door arms. Is there something else i should look for or does the actuator need to " fully extend" those door arms?
Try tuning it manually see if it makes diffrence
@@RBTheMechanic i will try that
Thansk RB, easy to understand that it's not DYI
I checked mines right now same issue but the blend door motor is working I made sure the black peice is moving up and down but still same issue so does that mean I’m just low on Freon?
It could be low Freon very high chances so u can either do reservice or first check pressure with a machine
I got no heat I change the heat control valve am a try this next and see if it works nice video
Yeah and check ur coolant level also see if core pipes get hot equally hot
@@RBTheMechanic Hi, I have a 2006 Honda Accord and there is a problem with no heat on driver's side. Passenger's side is ok. I checked the heater control valve and it seems to work properly. What I noticed is that one of the hoses connected to the heater core is warmer that the other. I can also hear a water flowing sound behind the dashboard. I flushed my heater core last year and after that I got a little bit warmer air on passenger's side but no change on driver's side. Greetings from Poland, the winter is coming and I've had enough of catching a cold after every longer drive. Please help me :)
@@maciejpod3654 did u check to see if u got dual temp control both blend door motors r working
@@RBTheMechanic Thank you for the quick response. I didn't know that there are two motors on passenger's side. Both are working but I noticed that one of the pins is out of guide (I don't know if "pin and guide" are correct words for these but hope you know what I mean, sorry I'm not a native speaker) so i pushed it into the guide. Before that the air was constantly blowing out of vents straight in my face and fingers, I also didn't have air blowing through vents on legs. But now that problem is solved and the air blows exactly where the mode I choose shows. (For two years I have been wondering who was so stupid to design it this way that you can't block air blowing in your face, haha). But still cold air on driver's side. After that I'm pretty sure it's not a matter of clogged heater core. The second motor (it works) is much deeper and i can't see the whole mechanism but I guess it might be a problem. Maybe one of the pins is also out of guide. Is the deeper one responsible for hot/cold air flow?
This is a great video! Thank you.
Yup thank you
I had a plug I didn’t plug in when I changed my radio could it be it don’t work because of that or no it’s just the motor ? That why my heat doesn’t change or ac
I would plug it back and see what happnes possability circuit is through head unit
Great video than you 😊
Welcome!!
Hey man, if the ac only gets cold when rpm is up what does that mean?
Seems like low Freon do ac service
@@RBTheMechanic I brought it to Valvoline and that’s what they did extract and put it back. Though I was not really impressed with the knowledge of the staff
I took off the blend door actuator like you show in the video and I can only manually move my blend door by hand about half of the way. So I guess that explains why I’ve got no heat. Any thoughts? Do I need to take out everything to see the actual blend door and if something is blocking it?
No u should be able to flip flop very easiesy
Yeah I can see yours in the video is able to open and close freely and easily. Mine isn’t like that. Something is not allowing it to open and close easily. I can move it by hand about half way and then I can’t push it any more….or I don’t want to push it too hard and potentially break something
@@spigli11 don’t force it u can brake it could be somthing stuck inside
Yeah I definitely don’t want to break anything. Sadly it seems like I may have to pull everything out to see if something is stuck in it
@@spigli11 if u can get scope camera u can look inside form too vent and see what’s in there first
I have one question, on cold weather when I put on heating is blowing hot air only on driver side and cold air on passenger side and if I put to blow cold air is coming on both sides. Do you have any idea what can couse that? Thank you
Is ur car dual climat control?
@@RBTheMechanic yes it is
@@markootasevic3957 then u need to check both if they r turning both side and check core out side fire wall pipes they should be equally hot
@@RBTheMechanic I will try to remove actuator from driver side and check manually if have some changes but if doesn't then I bhave no ideas what next to do.
Paji, I also have same problem in my accord euro 2007 driver side, just warm air and passenger side cold. I opened blend door actuator of driver side to check from inside and did cleaning just like you told in other video and put it back nothing happened. Before it was making sound of click click but after cleaning no sound so still have to replace blend door actuator? Even it looks ok. Much appreciated bro if you give suggestions. Thanks
Did u try to turn the door manually and u can open that acuator open clean the grease and push the pins so they can make better contact and use new grease
@@RBTheMechanic I tried to move manually also, but it was not moving from little force and I don’t want to break it down by putting more force. And yes I put new grease and checked the connection also. Connection is good. Don’t know what is wrong here…?
@@Baljeet66 u mean u took apart the acuator and cleaning greased internal
@@RBTheMechanic no paji, I checked if any crack or something stoping that circle to rotate but everything was fine. I didn’t clean grease. And connection is also good, which was you talking in video. So everything looks prefect(blend door actuator) but still I am getting warm air from driver side and cold from passenger. Any suggestions what can be wrong?
@@Baljeet66 now take out the acuator and plug it in without installing and try to see if it operates and turns normal
Thx buddy 🎉
My accord blows nothing but hot air on both sides and when I push the button to lower the temperature it stays stuck on hi anyone else have this problem
Is it digital control? Try resetting pull fuse or disconnect battery but make sure u have radio codes
My front defroster and floor vent don't work what do you suggest?
Check to see if the mode door motor is working that is what switches the air direction
Yes my mode door isn't working. Thank you RB
@@sheikhali4144 good find bro!!
How to fix if no power to blend door actuator ?
Never had that case might need to deep dignose start with hvac fuses
Thank you very much for your respond. might be from aftermarket radio (Metra 99-7803G) click on and off by itself. do you think? @@RBTheMechanic
@@MrJaxlogan yeah
I replaced driver side blend motor, still blowing cold on passenger & warm on driver side vents
Whatelse could it be.
Possibility low Freon it will only cool half of the system need to make the next step reservice ac system
The heat passage valve is stuck up the white peice
Not sure what u mean u can turn manually to see the effect
@@RBTheMechanic sorry I mean to say that white flap peice is the heat passage valve ? So what if we put it down right and now when I did it the middle vents towards the passenger now is cold except for the one on my left hand side towards the door on driver side 3 out of 4 vents is cold if u get what I’m saying brother brother
@@brooklyn7941 I’m sorry I don’t know where each stop is u have to let the acuator move it
Address please
I’m NJ
honda accord he says ..... i wonder if he has any clue that there's only like 15 different trims and not mentioning the trim is defntly not important ....
They all work same
You Orlando
No north NJ
I got an 04 accord its blowing hot on the passenger side but not in the driver n i need the heater on my driver side wat u think it could be the valve or the blend motors wat ca it be
Start with check the blend doors