Good info as usual..I have my lvs34 on pole mount on my kayak. I'm using the Fishing specialties kayak bowducer pole with their 34 transducer mount. It does down, forward & perspective. It's a ram ball transducer mount so you can adjust the angles infinity. The ram mount makes the transducer center below the pole so it has less water resistant & not hanging off the side like a hockey stick. It also has the cord run down through the pole it's completely out of the way, don't need to tie it up. I've been super happy with it so far!
I've watched most of the LVS34 install video's out there . This one is by far the best on how to orient the transducer with the perspective mount. Thank you!
i installed my this weekend and never could see my bait, if the wire is in the back which notice does have to be in to be in forward view thank you love your knowledge and videos
Great video! With a pole should I be using a flat mount or the slight angle mount they sent with it? Yours look flat to the pole. Also you show going to prospective mode from port side only, which way does it all go from Starboard side? Or should I switch to port then prospective? Thanks for the help that Garmin does not give!!
I see you can adjust the down angle on the summit mount for perspective mode. How do you adjust the down angle on the Garmin 34 mount? It looks square and not angled down, which means a lot to the 20 degree beam will be pointed out of the water and not toward the bottom. Seems you would want to be a able to adjust that. Is Garmin missing something?
I forgot to ask - from watching you orient between port & starboard then forward & down positioning, is that a 0 deg bracket ? It appears to be compared to the 2 diff ones which came with my unit. Thanks for your advice.
Hello love the video, I’ve got the 32 really wanting to up grade to the 34, i fish mainly 20 to 30 feet mainly fish brush piles rarely snipe fish don’t really like it is the 34 really worth the 1200 dollar upgrade thx
Did a really good job explaining on the lvs 34 unless I missed it I think that was the prospective amount that you were explaining would that be the same as a zero mount far if you were in down mode. just got it hooked up taking it out tomorrow hopefully the weather holds up
For bass fishing clear or dirty waters, which way would I need my transducer? Brand new to livescope not sure what I’m doing but you are helping lots, thanks. I just don’t know if I should put it down or front or which one
So by “starboard side” are you referring to which side of the boat the trolling motor is mounted on or which side of the trolling motor the transducer is mounted on?
So when i bought mine, I put it on a pole, not on trolling motor. It cam with two mounting brackets with the four holes. One straight and one has an angle. Which one should i use.
Thank you for making such a clear concise video. I had my transducer faced backwards with cable in front prior to this and knew I had something wrong by what i was seeing on chartplotter.
I have fishing specialist mount. No pole in the way to be on starboard or port side. Sooooo let me understand this correct.... regardless of which side I use port or starboard the cable in front or in the back tells me which way to orientate the Transducer.. Cable in front means bottom is parallel Cable in back means top is parallel Also I have used down mode and left it in the same position and adjusted the angle or pitch to make it straight as possible on the installation setup and I believe it was pitch
Good video, have a question off the subject. How can I turn on and off my tracks on a ultra 126sv. Have tried but end up losing all tracks. My screen is loaded with tracks I don't need but don't want to lose the ones I do.
You can save individual trails but you would have to start a new trail with the intent on saving it. You haven’t cleared tracks and all Of a sudden want to save a specific section that can’t be done. I’ll shoot a video soon on it
Is that on the 8 degree angle? Lvs34? I have the seelight 2.0 system and trying to figure out if i should use the garmin perspective mount or do i need a zero degree mount? Or should i order the summit one? Lol. Sorry just bought livescope and 126. Haven’t used it yet.
I have a question, I'm running a livescope setup upfront and a 94sv at the console. Do I need 2 separate batteries for this setup. What brand of fuse block do you run, I'm trying to figure out what I need for my setup
One more question.... I calibrated my unit and got a 97% on both readings. However, for some reason the cone on the top right corner does not point in the direction that the transducer is pointing. I have done it 6 times and have the same problem. I have done it with the trolling motor and big motor. Any ideas?
So, on I LS v32 starboard shaft mount, can I see under the boat in forward view setting and down position? in down position, how many feet forward can a person hope to see? Thanks
@@ryanmcatee1418 that tells me your transidcer isn’t level due to trolling motor shaft lean. See it a lot when I’m doing lessons Or your top beam isn’t not aligned properly.
@The_Garmin_Guru I think my shaft is off since I switched to lithium batteries . Should I just run it the click up? Will it hurt anything? I run fish obsessed 0 degree as well. Only been out w it twice for couple hrs
@@ryanmcatee1418 that sounds like the problem. Front sits lower due to the lighter batteries. That explains having to click it up. In the video I’m referring to people with level shafts having to click it up. But I would use the mount to account for that unevenness
We have watched on various videos on garmin that says the opposite position of the transducer of what you said. We have always had problems with it. But what you teach makes sense. No one ever said where the cameras/ sensors are; so we changed our starboard side per your instructions & so far it is working great. Can't wait to try it out in deeper water. Thanks!😮
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Thanks. I have mine on the port side. U changed my life.
Getting ready to put mine on a pole this weekend great video bud. The video helped so much.
Glad it helped
Good info as usual..I have my lvs34 on pole mount on my kayak. I'm using the Fishing specialties kayak bowducer pole with their 34 transducer mount. It does down, forward & perspective. It's a ram ball transducer mount so you can adjust the angles infinity. The ram mount makes the transducer center below the pole so it has less water resistant & not hanging off the side like a hockey stick. It also has the cord run down through the pole it's completely out of the way, don't need to tie it up. I've been super happy with it so far!
Yea I bought one of those. It worked ok.
I've watched most of the LVS34 install video's out there . This one is by far the best on how to orient the transducer with the perspective mount. Thank you!
Great to hear!
i installed my this weekend and never could see my bait, if the wire is in the back which notice does have to be in to be in forward view thank you love your knowledge and videos
Great video!
With a pole should I be using a flat mount or the slight angle mount they sent with it?
Yours look flat to the pole.
Also you show going to prospective mode from port side only, which way does it all go from Starboard side? Or should I switch to port then prospective?
Thanks for the help that Garmin does not give!!
0 degree mount on a pole.
Just watched this. I think I get it between forward and down orientation. I'm going to run a front mounted pole like you've got on my boat
Have fun bud
HAD MINE ON BACKWARDS!! THANK YOU SO MUCH!! GREAT HELP!!
You're welcome!
Thx Randy. Fantastic video, finally I’m 100% sure of what I’m doing 😊🇧🇪
Thanks for watching bud
Great information. Once again, a learning experience! You always do a great job. Thanks.
Thank you kim
Great video!! I sure love my masterclass! This video was very helpful when i installed my lvs34 and 1022
Thank you john
Great job bro. How about a video comparison between the 8 degree offset livescope mount vs the 0 degree mount ?
I’ll try to do that
Thanks for the video, helped me out a bunch. This is exactly what I needed to see in order to get an understanding of the transducer.
Glad it helped bud
I see you can adjust the down angle on the summit mount for perspective mode. How do you adjust the down angle on the Garmin 34 mount? It looks square and not angled down, which means a lot to the 20 degree beam will be pointed out of the water and not toward the bottom. Seems you would want to be a able to adjust that. Is Garmin missing something?
Installing my lvs34 on my yak today. Thanks for this 👍
Hope you enjoy it!
Well done ! New user of Livescope and I found your explanation very helpful. Thanks !
Glad it was helpful!
I forgot to ask - from watching you orient between port & starboard then forward & down positioning, is that a 0 deg bracket ? It appears to be compared to the 2 diff ones which came with my unit.
Thanks for your advice.
@@red00dog47 that’s a summit fishing equipment mount. Visit my website and you’ll see a link to the their website.
Watched it for the 32 now back for the 34
Yes sir
Hello love the video, I’ve got the 32 really wanting to up grade to the 34, i fish mainly 20 to 30 feet mainly fish brush piles rarely snipe fish don’t really like it is the 34 really worth the 1200 dollar upgrade thx
Hi my friend how deep the transducer lvs 34 should be in the water ? Thank you for the answer!
Garmin Livescope: Does Install Depth Matter???
th-cam.com/video/MVKjYE1IbNc/w-d-xo.html
Did a really good job explaining on the lvs 34 unless I missed it I think that was the prospective amount that you were explaining would that be the same as a zero mount far if you were in down mode. just got it hooked up taking it out tomorrow hopefully the weather holds up
If I’m understanding you right brother yes it will be. The summit is infinitely adjustable for any angle.
Best explanation I've seen yet!!
Thanks bud. Please feel
Free to share
Great video good job of braking and Explain it
Thanks bud
Hoping to rig mine up today! Thanks for the video!
Good luck!
For bass fishing clear or dirty waters, which way would I need my transducer? Brand new to livescope not sure what I’m doing but you are helping lots, thanks. I just don’t know if I should put it down or front or which one
Definitely forward mode
Good video and helpful information 👍
Thanks Billy
Thank you for this. It was very helpful and well explained.
So by “starboard side” are you referring to which side of the boat the trolling motor is mounted on or which side of the trolling motor the transducer is mounted on?
Thank you so much you are awesome guy and thank you again
Thanks Olan
when using a rod holder mount, on the port side gunwal, do I still face transducer forward?
Perfect, so helpful
Good video can you do some 32 setting video in the future
Brother I’ve done a bunch of those.
Garmin Livescope: Optimzed Settings And Why For 27/20 Updates
th-cam.com/video/HAs6SnxZ_6E/w-d-xo.html
TY for the informative video. lots of new to me info!
Thanks for watching bud
Awesome information and awesome video
Thanks olan
In forward view on a pole mount is the transducer supposed to have that slight angle up?
Yes sir
So when i bought mine, I put it on a pole, not on trolling motor. It cam with two mounting brackets with the four holes. One straight and one has an angle. Which one should i use.
@@LukeBlizz 0 degree
Thats what i just figured out. Its been wrong all year. I had the 8 degree on it
@@LukeBlizz the 8 degree is just to clear the trolling motor
Great video! Best one that I have seen.
Thanks bud. It’s part of my livescope masterclass on WaypoinTV
What is Waypoint TV never heard of it?
@@jwalker5144 it’s a channel like the outdoor channel or sportsman channel. You can download the app or go to
Their website
Another great video Randy, what brand transducer pole is that. Thanks
Livefoot.
@@The_Garmin_Guru Thanks
Thank you for making such a clear concise video. I had my transducer faced backwards with cable in front prior to this and knew I had something wrong by what i was seeing on chartplotter.
Glad it helped brother
I have fishing specialist mount.
No pole in the way to be on starboard or port side. Sooooo let me understand this correct.... regardless of which side I use port or starboard the cable in front or in the back tells me which way to orientate the
Transducer..
Cable in front means bottom is parallel
Cable in back means top is parallel
Also I have used down mode and left it in the same position and adjusted the angle or pitch to make it straight as possible on the installation setup and I believe it was pitch
If I’m understanding what you typed it sounds correct to me on all your statements bud. I’m assuming the 32 also
Correct 32. Thank you
Is the newer LVS 34 mount that comes with the unit considered a "O degree" mount?
No sir still an 8 degree mount. I always recommend getting an aftermarket
When I move to a different spot and pull the troll motor up, do I have to turn anything off?
Naw. I never have
One question for clarification: starboard/port side of the pole, not the boat?
Yes
Extremely well said. 👍🏻
Yes sir
Good video, have a question off the subject. How can I turn on and off my tracks on a ultra 126sv. Have tried but end up losing all tracks. My screen is loaded with tracks I don't need but don't want to lose the ones I do.
You can save individual trails but you would have to start a new trail with the intent on saving it. You haven’t cleared tracks and all
Of a sudden want to save a specific section that can’t be done. I’ll shoot a video soon on it
Do you have a video of this mounted on an Ultrex with 360
Naw I’m not a real fan Humminbird
Great explanation! Thank you.
Thanks DLC
Can you install this mounted to the transom for down view?
Yes you can. Might need a special mount my friend
Thanks for the response!Would I be able to see in front of the boat and down?
Is that on the 8 degree angle? Lvs34? I have the seelight 2.0 system and trying to figure out if i should use the garmin perspective mount or do i need a zero degree mount? Or should i order the summit one? Lol. Sorry just bought livescope and 126. Haven’t used it yet.
It’s a summit mount that adjust to any angle.
How far under the waterline do you like the transducer?
A foot to 18 inches. Be conscious of waves
Does it matter if the transducer is port or starboard?
I’m gonna need more info
Helps a lot
No problem bud
Does the orientation on the installation tab have to be on auto or forward?
Not sure I quite follow bud.
Is that a new mount for the lvs 34 or what? Mine does not look like that. Thanks
Summit perspective mode mount
I have a question, I'm running a livescope setup upfront and a 94sv at the console. Do I need 2 separate batteries for this setup. What brand of fuse block do you run, I'm trying to figure out what I need for my setup
Naw 1 battery will do and I just found a waterproof fuse block on amazon
I ordered a fuse block, and #10 pos wire last night. Like you I'm from Louisiana, what part are you from
One more question.... I calibrated my unit and got a
97% on both readings. However, for some reason the cone on the top right corner does not point in the direction that the transducer is pointing. I have done it 6 times and have the same problem. I have done it with the trolling motor and big motor. Any ideas?
Garmin Livescope: Beam Indicator On Screen and Why Its Useless and The Best Way To See Your Beam
th-cam.com/video/KZSum-Bjcrc/w-d-xo.html
I went out and had it mounted with cord in the front and it worked?? Can you face it anyway?
Yes you can but I suggest the cord towards the back for protection
@The_Garmin_Guru I forgot to tag you on my question.
There are 4 words that should be in the Garmin install literature: "Cord in the back"
Correct
I am looking for the 0 degree mount you have. I can't seem to locate it. Could you give me the part number.
Summit fishing equipment
Good one agin I like it
Thank you
What pole mount do you have ?
Livefoot. The only one to have
Great information
Thanks bud
i'm confused. is not the end where the cable comes out the front of the transducer?
@@Badkharma21 cable always towards the back of the boat
@@The_Garmin_Guru ok thanks. the issue i have is that when it is mounted that way and i am moving forward in my boat a target on FF gets further away.
@@Badkharma21 sounds like you have it down mode. Just guessing
@@Badkharma21 or your angle is wrong
I had it 180 back asswards.
You have back asswards ass backwards😂😂💀
Can I send you a couple pics of my transducer set up & get your opinion.
Thegarminguru@gmail.com
On the LVS34 truly not sure of what angle the transducer needs to be set to start.
For what orientation are you referring bud
why does flat= down view? and forward view is tilted?
Because the beam is only 135 degree swath
@@The_Garmin_Guru ok thanks
@@japapelili I have some other videos that show this more in depth
So, on I LS v32 starboard shaft mount, can I see under the boat in forward view setting and down position?
in down position, how many feet forward can a person hope to see?
Thanks
It’s limited to depth and not much more
@@The_Garmin_Guru thanks
had to really crank the sound up to hear.
Hope it helped you out. First person to say something about the sound. Might be your speakers but I’ll check on it
Most ppl ik have to run lvs 34 1 click up. If not I can't see my bait more than 30ft
I can see my bait out as far as I stretch the pic.
@@The_Garmin_Guru nice , I can't see shit past 30 w it in forward position. Click up n see out to 80
@@ryanmcatee1418 that tells me your transidcer isn’t level due to trolling motor shaft lean. See it a lot when I’m doing lessons Or your top beam isn’t not aligned properly.
@The_Garmin_Guru I think my shaft is off since I switched to lithium batteries . Should I just run it the click up? Will it hurt anything? I run fish obsessed 0 degree as well. Only been out w it twice for couple hrs
@@ryanmcatee1418 that sounds like the problem. Front sits lower due to the lighter batteries. That explains having to click it up. In the video I’m referring to people with level shafts having to click it up. But I would use the mount to account for that unevenness
8022 Kub Village
Rodriguez Nancy Hall Ronald Moore George
This is totally opposite of what we we were taught.
How do you mean brother
We have watched on various videos on garmin that says the opposite position of the transducer of what you said. We have always had problems with it. But what you teach makes sense. No one ever said where the cameras/ sensors are; so we changed our starboard side per your instructions & so far it is working great. Can't wait to try it out in deeper water. Thanks!😮
@@robyartist1 awesome brother. I’m glad I could help. Have a blessed day
What kinda pole are you using if the transducer is not mounted to trolling motor?
Live foot
64852 Brando Estates
9915 Altenwerth Streets