Learn how to replace your 2009-2017 Mitsubishi Lancer rear bumper cover
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- We've got another quick and easy tutorial on how to remove your rear bumper cover. You only need a few tools and a desire to save money!
Where to purchase: bit.ly/LancerRearBumper
Source: www.revemoto.com
0:00 Start
0:08 Intro
0:25 Tools needed
1:10 Bumper ends
3:24 Bottom clips/bolts
4:44 The bolts under the trunk
6:14 Dismount the bumper
6:50 Rear wire harness
8:42 Outro
Hello, one and all! Thank you for stopping by and watching our Lancer rear bumper tutorial video. This is a pretty quick and easy removal process and hopefully, this is detailed enough for you to get the job done quickly. We do want to point out that his car has been painted before on every side. As you can see, the original bumper does not match her rear quarter panels. The bumper we painted will also not match the panels but it will match the trunk lid.
TOOLS NEEDED:
A Philips screwdriver, a panel clip removal tool, or a flat-head screwdriver. Lastly, you'll need a 10mm wrench or socket wrench. An impact gun will be much faster with a 10mm socket.
THE PROCESS:
We started with the sides of the bumper ends or the fender liners. The fender liner is only attached to the bumper with a couple plastic clips. These are a bit different, in that you can unscrew these plastic screws but you have still need to pry the clip out. It should be pretty easy once you unscrew it but sometimes it just spins. If this is the case, try and wedge something behind the clip to hold it sturdy and unscrew it. There is what we like to call the universal bolt or screw, on every vehicle that will secure the bumper to the fender or rear quarter panel. It's always located on the corner of the bumper and usually goes into the bumper.
Once we get through with the bumper ends, we like to move to the bottom bumper bolts and screws. This Lancer has clips on the bottom that secure it to the frame. There is a plastic clip on each end and probably a few in the middle. We say "probably" because this customer had all of them missing. So, they definitely had this bumper worked on in the past. But as long as the ends are secured, it should be fine. We do recommend installing all the clips and hardware needed but this customer said they would purchase it on their own. It's also best to release the bottom of the bumper before you do the top. This should prevent the bumper from falling while your working below it.
Lastly, there are two 10mm bolts under the trunk lid. Now you are ready to dismount the bumper. Start with the bumper ends work your way to the middle. There are brackets on the ends and under the tail lights where the bumper snaps in to stay secured. Firmly but gently pull the bumper off these brackets starting on each end and move towards the middle.
Congratulation, you just removed your rear bumper cover. We told you it was easy.
Please visit our social media below or our website (the link is above).
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
_____________________________________
#lancer #mitsubishi #mitsusbishilancer #lancerSE #lancerproject #DIYproject #revemoto #paintedautoparts #HowTo #Lancersport
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
Thank you for watching our rear bumper removal video. Please let us know in the comments if there is anything more you would like to see.
Where to purchase: bit.ly/LancerRearBumper
Source: www.revemoto.com
Hey... I have never done any auto body work before nor have I worked on a car. Your video made the process of going to a scraper and pulling one off myself.
Helped so much and saved us $$$.
Thanks for the help!
This made my day! Thank you so much for watching and yes the scariest part is starting it. After that it’s super easy! If you need any parts go to www.ReveMoto.com
You made that job look 👀 super easy. I just saved $500.00 replacing my daughter headlights and remounting her bumper.
Glad I could help! Thank you for watching and please subscribe, it really helps us out.
You and wife just helped me upgrade my lancer. Thanks
Oh man thank you so much for watching. So glad that we could help in the building process. If you need parts for your car in the future go to www.ReveMoto.com
Thanks again great help
Glad to help
Good on you mate 🎉
You are very welcome! Go to www.ReveMoto.com for more car parts
Muito bom seu video. Me ajudou bastante. Um salve do Brasil!!! ✌🏻🇧🇷
Estamos felizes em poder ajudar. Obrigado por assistir!
Thank you sir
Glad the video helped out! If you need parts for your car go to www.ReveMoto.com
Thanks dude
Happy to help!
Merci beaucoup mon ami ! Bon travail.
Merci d'avoir regardé notre vidéo !
Hi I wanted to do this for my lancer however my lancer is a sportback and not a sedan apart from the numer plate place for the sedan being on the bumper will the sedan bumpers still fit my sportback or do i need to use another sportback bumper???
hello there great job at the tutorial and explaining stuff I learned a lot this the only video in youtube who showed what’s behind the bumper and how to remove it. anyways I would like to know what part it’s called the mount on 8:21 in the video cuz mine is rusted and I would like to know where I can get it thanks!
Hello and thank you for watching! I believe that is a retainer plate. The Mitsubishi guys should know it but I think it is 6430a083. Cheers!
@@ReveMoto sweet! thank you so much! :D
What’s that black plastic the cover is attached too called? Mine is also damaged and needs replacment
Hit up www.ReveMoto.com they can help you out
Hi , do Mitsubishi 2017 model tail lights suitable for 2015 Ex model ?
Hello! I am unsure. They look to be the same shape and there are companies that sell a 3rd party tail light from 2008-2017. I would double check on Lancer forums, thanks for watching!
Sorry for being 7 months late but yes, 08-17 all have the same tail lights
What if the bumper has rear parking sensors?
Thank you for the question. The sensors normally clip onto the bumper and have a harness attached to them. You just unplug the harness and pop the sensors off. It sounds like an oversimplified description but it's very easy. Thank you for watching!
@@ReveMoto thank you!
OMG same as the front what a nightmare of a design
Haha this actually not as bad as doing a Genesis
You didn't even show us how you replaced it u just took it off.
Hi Louis, Sorry about that this is a two part video. Here is the install portion : th-cam.com/video/6k-q7UpjICA/w-d-xo.html