I was able to change the rack on my Ranger thanks to your video. I greatly appreciate the help. Getting the old one out tested the limits of my vocabulary. Getting the new one in went pretty easy actually, but I did have to remove one of the hard lines to allow me to rotate the rack into its final position. No big deal.
More difficult with floor jacks and that last rotation to drop into place and to clear the hard line and rotate the passenger side mount in the Ford engineered cradle diviot it a huge PITA. I ended up using a round 3/8 socket shaft in the rack mount hole to get leverage to force it into the rotation. I watched that part of your clip at the 11:50 mark like 10 times trying to figure out what I was missing. Thanks for posting!!
I couldn’t get those bushings out. It wouldn’t turn. I had to put a two foot pipe wrench on it and turn it by force to get it out, and I had to drive it out with a sledge from the passenger side once I got the drivers side out of the hole. Thanks for the video!
Just putting my 2010 together now it's not as easy as I thought it would be but yeah this video helped me a lot. thank you. I had a harder time to get the old one off then the new one in 😅
Glad it helped, if I remember correctly I had a harder time getting that one out then the new one in also thanks for watching like and subscribe. Hope you have a great day.
Its always tight when they build everything that compact , its just a matter of remembering all the little steps to get the old one out, as you did, and reverse those steps.
Thanks for the video. The one I did was rusty and high miles. Those bushings? Had to cut the mounts on the rack to get them out. I'd like those hours of my life back.
Great video. I could hear you just fine. Have you ever changed just the lines? All my lines are toast. Completely rotted. I'm not looking forward to this. 😢
Do you know I don’t know what kind of car that is and I don’t know if you’re doing this for money fixing somebody’s vehicle but if it’s a car worth doing a steering rack and spending all that money to go the extra distance and encourage them to buy all new lines. It’s really kind of a thoughtful thing to suggest because the debris that’s in those old lines, it’s just gonna start wearing out that steering rack with contamination so you know I don’t know. I would certainly replace all the lines going to the extent of putting a steering rack in a car as well as possibly even putting a new steering pump in so that you’ve got a whole new thing is probably maybe a little more than twice the expense perhaps but if somebody’s gonna put that money in it, they’re gonna probably keep the car and I don’t think it’s real and at least replace the lines. No offense, but certainly up charge and after our steering rack is really not that hard. It’s a profit margin and doing a steering rack is up as 1 million bucks. It’s not really that hard.
I was able to change the rack on my Ranger thanks to your video. I greatly appreciate the help.
Getting the old one out tested the limits of my vocabulary.
Getting the new one in went pretty easy actually, but I did have to remove one of the hard lines to allow me to rotate the rack into its final position. No big deal.
Thanks for watching like and subscribe
Looks like it went the way you expected! It is a good amount of work to swap over. Way harder on a couple floor jacks. Great video and explanations!
Yeah, it is definitely a tight fit.
I'm changing one right now and realize it won't come out because my jack stand is under the control arm, thanks for the video👊
Thanks for watching like and subscribe. Hope you have a great day.
More difficult with floor jacks and that last rotation to drop into place and to clear the hard line and rotate the passenger side mount in the Ford engineered cradle diviot it a huge PITA. I ended up using a round 3/8 socket shaft in the rack mount hole to get leverage to force it into the rotation. I watched that part of your clip at the 11:50 mark like 10 times trying to figure out what I was missing. Thanks for posting!!
Thanks for watching and thank you very much for the donation. Please like and subscribe. I hope you have a great day.
I couldn’t get those bushings out. It wouldn’t turn. I had to put a two foot pipe wrench on it and turn it by force to get it out, and I had to drive it out with a sledge from the passenger side once I got the drivers side out of the hole. Thanks for the video!
🔧👍🔧
Just putting my 2010 together now it's not as easy as I thought it would be but yeah this video helped me a lot. thank you. I had a harder time to get the old one off then the new one in 😅
Glad it helped, if I remember correctly I had a harder time getting that one out then the new one in also thanks for watching like and subscribe. Hope you have a great day.
I have noticed not many shops rebuild the Racks ..... the nice thing about most Suv and trucks with racks there is no sub frame in the way
🔧😃🔧
Great explanation here! Very informative. Thanks!
Thanks
Excellent instructions. Thank you very much.
You are welcome! Thanks for watching
Its always tight when they build everything that compact , its just a matter of remembering all the little steps to get the old one out, as you did, and reverse those steps.
😃
Clean install. Good job!
Thanks
Thanks for the video. The one I did was rusty and high miles. Those bushings? Had to cut the mounts on the rack to get them out. I'd like those hours of my life back.
🔧💯🔧
I just changed my steering rack with this video. It was a success, however.. I was wondering why you drained the coolant?
I believe I also did a thermostat on this one
you know its hard to sneak in that noon nap working under a lift lol .. the boss can see you .. the bonus of being mobile lol
For sure
I have to do a 2011 Ranger. What brand rack and pinion did you use? Video will help me a lot!
Sorry, I am not sure I did not order the part
Did this with the engine out (was doing a V8 swap at the time). Came out just a tad easier :)
😃
I spent half a day at the shop working on this when I was asking for more money anyways some people got cussed out but I get paid lmfao
🔧✌️🔧
Did you hold the steering wheel so that way it’s not crooked?
You could run the seatbelt through the steering wheel and latch it
@@lakesautomotivediagnostics6509
Ok thank you
@@chrisruano4201 you’re welcome
Just before 4 minutes how did you get that line out with the rubber tube connected too it
just remove the 13 mm nut that holds the two lines to the rack and they come out
@@lakesautomotivediagnostics6509 alright I’m doing it right lol, mine is just seized to the rack
@@lakesautomotivediagnostics6509 thanks buddy 👍
🔧😃🔧
Great video. I could hear you just fine. Have you ever changed just the lines? All my lines are toast. Completely rotted. I'm not looking forward to this. 😢
Not that I can recall we don’t get many older vehicles in the shop, thanks for watching. Hope you have a great day.
I spent half a day at the shop working on this when I was asking for more money anyways some people got cussed out but I get paid lmfao
🔧✌️🔧
Was this "new" rack or a reman?
It came from Indy rack and axle so I’m not sure
@@lakesautomotivediagnostics6509 thanks for the info I'll check them out.
You’re welcome
Sound quality is bad. Can't hear him
Sorry about that
Do you know I don’t know what kind of car that is and I don’t know if you’re doing this for money fixing somebody’s vehicle but if it’s a car worth doing a steering rack and spending all that money to go the extra distance and encourage them to buy all new lines. It’s really kind of a thoughtful thing to suggest because the debris that’s in those old lines, it’s just gonna start wearing out that steering rack with contamination so you know I don’t know. I would certainly replace all the lines going to the extent of putting a steering rack in a car as well as possibly even putting a new steering pump in so that you’ve got a whole new thing is probably maybe a little more than twice the expense perhaps but if somebody’s gonna put that money in it, they’re gonna probably keep the car and I don’t think it’s real and at least replace the lines.
No offense, but certainly up charge and after our steering rack is really not that hard. It’s a profit margin and doing a steering rack is up as 1 million bucks. It’s not really that hard.
A lot of people don’t have extra money to do extra things. I hope you have a great day.