Well, be careful with the white hose of the fuel connector, you was struggling with the clamp, it can brake when you force to open it. You should gently pull up the middle tab and press the sides.. Check also this video with more details about the connectors at the fuel filter house : th-cam.com/video/K6scU_Zh_9U/w-d-xo.html
You're right. It is not easy disassembly this connection. I think it is not necessary disassembly the whole hose of filter.The lite "O" ring can be damage.
@@tamaspozer1772 i cały syf w obrębie filtrow znowu zostaję ja dziś wymieniłem oba i zobaczyłem po wyjęciu ile lisci brudu jest w tej dziurze po odkurzeniu klima zaczęła mocniej chłodzić szybszy nawiem się zrobił
Hello, thanks for the videos, I have seen several. I have this car and it leaks oil from the camshaft head, right where the diesel is spilling in this video. has it happened to you? Do you know any way to repair it without disassembling? all the best.
Hello, I think you have injektor seal leak or camshaft head seal leak. It is typical Peugeot engine problem. This is impossible repair without disassembly. You have to change the wrong seal.
Szia Gábor! Az én autóm T9 99LE Euro6-os. Az Euro5 Hdi-nél ugyan ott van az üzemanyag szűrő csak más típusú. Nem betétet kell cserélni, hanem az egész szűrőt. Hello Gabor, my car is a T9 99HP Euro6. The Euro5 Hdi has the same place fuel filter, but it is a different type. By Euro6 You have to replace the paper filter, but the Euro 5 metal filter hause.
hello sir, thank you for your good explanation! Does the system also need to be bled? or does this happen automatically? and does the reservoir also have to be refilled during the change? thanks in advance for answering. Greetings Albert Jan
Hello Albert Jan, The system not need to be bled, it is automatically. I usually dosent do nothing, the original diesel stay in the tank. I change only fuel filter.
Hey Tamas, great video. One of those pipes on my 308sw is leaking. It is a very subtle thing right were pipe clips to the filter and for the life of me, i cant find out wich one. I can see anything broken or cracked in the clips or the filter case.
@@tamaspozer1772 i have. I have had the car working and no spray is visible. But a couple days later it is very visible. I believe it is the white quick release on the tube on the right but Peugeot doesnt sell it separate
keep posting videos of peugeot 308
Pozer arrête la mécanique, tu n'y connais rien et en plus tu ne sais pas faire de vidéos !!
J'achèterai un meilleur appareil photo quand la chaîne fonctionnera.
Well, be careful with the white hose of the fuel connector, you was struggling with the clamp, it can brake when you force to open it. You should gently pull up the middle tab and press the sides.. Check also this video with more details about the connectors at the fuel filter house : th-cam.com/video/K6scU_Zh_9U/w-d-xo.html
You're right. It is not easy disassembly this connection. I think it is not necessary disassembly the whole hose of filter.The lite "O" ring can be damage.
Great video - many thanks 😊😊
how many miles driven before replacing this filter? The filter looked very dirty. Subscribed!
I went with this filter 21 000 km namely 13 miles. I replaced the fuel filter every two's motor oil change. Thanks.
Ale partacz nawet nie wyczyscil obudowy
Filtr ma za zadanie wychwytywać zanieczyszczenia. Zmieniam tylko filtr.
@@tamaspozer1772 i cały syf w obrębie filtrow znowu zostaję ja dziś wymieniłem oba i zobaczyłem po wyjęciu ile lisci brudu jest w tej dziurze po odkurzeniu klima zaczęła mocniej chłodzić szybszy nawiem się zrobił
And what did you lubricate the gum with, so that it would not creak before twisting?
I did lubricate the gum with WD40 spray.
Hello, thanks for the videos, I have seen several. I have this car and it leaks oil from the camshaft head, right where the diesel is spilling in this video. has it happened to you? Do you know any way to repair it without disassembling? all the best.
Hello, I think you have injektor seal leak or camshaft head seal leak. It is typical Peugeot engine problem. This is impossible repair without disassembly. You have to change the wrong seal.
👍
Hello Tamás,
It’s for T9 EURO5 (92 HP), do you know where is the location of the diesel filter on the EUR6 models?
Szia Gábor! Az én autóm T9 99LE Euro6-os. Az Euro5 Hdi-nél ugyan ott van az üzemanyag szűrő csak más típusú. Nem betétet kell cserélni, hanem az egész szűrőt.
Hello Gabor, my car is a T9 99HP Euro6. The Euro5 Hdi has the same place fuel filter, but it is a different type. By Euro6 You have to replace the paper filter, but the Euro 5 metal filter hause.
What is the attachment you placed on top to unscrew it called and what size?
Hello, this is special Socket wrench. Size 24
hello sir, thank you for your good explanation! Does the system also need to be bled? or does this happen automatically? and does the reservoir also have to be refilled during the change? thanks in advance for answering. Greetings Albert Jan
Hello Albert Jan,
The system not need to be bled, it is automatically. I usually dosent do nothing, the original diesel stay in the tank. I change only fuel filter.
@@tamaspozer1772 Thank you for The answer ! Good video’s!
i want to do direct injector purge are the lines marked with white and greeen the feding and returning line or are there more lines?
Hello, there are two line (pipe) one in and one out line. The fuel has to clean, without will be the injector and pump wrong.
Hey Tamas, great video. One of those pipes on my 308sw is leaking. It is a very subtle thing right were pipe clips to the filter and for the life of me, i cant find out wich one. I can see anything broken or cracked in the clips or the filter case.
It is very dangerous situation. If the fuel pipe has a leaking can be fire. You can try find leaking spray the leaking pipe.
@@tamaspozer1772 i have. I have had the car working and no spray is visible. But a couple days later it is very visible. I believe it is the white quick release on the tube on the right but Peugeot doesnt sell it separate
@@RC-ph7qs Try disconnect the pipe joiner and spray with WD40. After that reconnect on your place. It is possible it will be better.
Hey Tamas, what is the size of the socket wrench of the filter?
@@RC-ph7qs Hello, it is 26.