I’ve just been sold shell helix ultra 5w40 oil for mine after initially wanting to buy 5w30 but he said it was the wrong oil for a 2008 mk2 B9 partner van. Is there a difference?
Another fantastic informative video ! Interesting tip, pouring a small amount of oil though to remove the old remaining oil in the sump before reconnecting the sump plug & refilling with new oil ! You you recommend oil flushes ?
@@willkycz5103not sure about the ehdi engines (since the guy said it's a 2019 van), but 5w30 total Q ineo is factory recommended for my 2013 berlingo 1.6hdi engine
c' est pareil mais dans le sens inverse... petite subtilité pensé à avoir avec vous un bon verre de gazole pour remplir la cloche du filtre à carburant car ni amorçage automatique ni pompe à main. retirer l' ancien filtre vidé la cloche placé le nouveau filtre remplir de gazole et remontage.
Another great video, just done it myself & fed up with garages over filling ! I flushed the old oil with a bit of fresh oil & replaced the oil with 3.75 liters & spot on, Air filter is a nightmare & I will leave the fuel filter for next time ! Thanks
Have you ever had a DV6 oil filter element stay in the filter housing rather than secured into the lid? Mine was like this today, and I'm fairly certain the new oil 'leak' is oil that fell into the bell housing finding its way out (I'm hoping as it looks like the hole for the slave is right beneath the housing)!
Very informative filming but with this newer version of fuel filter housing, could you tell me how you primed it after fitting the new filter? It wasn't apparent in the video unless priming happens electronically. Thank you.
Was wanting to ask the very same question. With a how to video, you need all the details really. I saw a similar video and they hand pump out the old diesel from the housing. Clean the top cap with carb cleaner. Fit the new seal to the top cap . Then fit the new filter. Then pour in fresh diesel and fill up the filter housing right to the top. Then screw on the top cap until the plastic tabs come together. Refit connectors etc. I hope this helps anyway.
@@ORileysAutos As my old gaffer used to say “it’s better to know what killed you then not to know” leats face it Jimmy probably 90% of the chemicals & fluids that mechanic’s use are harmful to health. I spent 35 years in construction not doing what I should of done to protect my health in later years.
@@kenlarman4252I have spent simular time in the construction industry & not a lover of PPE , hands not in great shape thanks to plaster dust, cement dust & working in different environments . I do try to use gloves,but a nightmare connecting things up as an electrician, one is expected to wear thick gloves that a knife will not cut !
Some handy tips its easier watching you than trying to read a haynes manual,good advice on the tools as well 👍
Glad it helped
Think 0-30 oil is better option for the euro 6 vans, not that the one you used is a problem.
Great video ! Any tips or suggestions to cure my 2006 Berlingo that sounds like a tractor !! Think it’s the HP fuel pump … 😢
I’ve just been sold shell helix ultra 5w40 oil for mine after initially wanting to buy 5w30 but he said it was the wrong oil for a 2008 mk2 B9 partner van. Is there a difference?
Another fantastic informative video !
Interesting tip, pouring a small amount of oil though to remove the old remaining oil in the sump before reconnecting the sump plug & refilling with new oil !
You you recommend oil flushes ?
Happened me too did you use the 5w-40 I've had no choice . I didn't realise until I had started the process of changing the oil
5W-30 is wrong oil on these engines , you need to use 0W-30 ACEA C2 PSA B71-2312 specific certification
Is this true?
@@willkycz5103not sure about the ehdi engines (since the guy said it's a 2019 van), but 5w30 total Q ineo is factory recommended for my 2013 berlingo 1.6hdi engine
@@dzoni97a my 18 plate recommends 0w30 in the book
5w40 total oil
Sorry but he didn’t film installing the new oil filter did he?
c' est pareil mais dans le sens inverse... petite subtilité pensé à avoir avec vous un bon verre de gazole pour remplir la cloche du filtre à carburant car ni amorçage automatique ni pompe à main. retirer l' ancien filtre vidé la cloche placé le nouveau filtre remplir de gazole et remontage.
brilliant thanks , ive recently got a 2011 van with 1.6 hdi engine, very helpful video.. just subbed...
Another great video, just done it myself & fed up with garages over filling !
I flushed the old oil with a bit of fresh oil & replaced the oil with 3.75 liters & spot on,
Air filter is a nightmare & I will leave the fuel filter for next time !
Thanks
Have you ever had a DV6 oil filter element stay in the filter housing rather than secured into the lid? Mine was like this today, and I'm fairly certain the new oil 'leak' is oil that fell into the bell housing finding its way out (I'm hoping as it looks like the hole for the slave is right beneath the housing)!
Very helpful video. thanks for sharing tips.
Very informative filming but with this newer version of fuel filter housing, could you tell me how you primed it after fitting the new filter? It wasn't apparent in the video unless priming happens electronically. Thank you.
Was wanting to ask the very same question. With a how to video, you need all the details really. I saw a similar video and they hand pump out the old diesel from the housing. Clean the top cap with carb cleaner. Fit the new seal to the top cap . Then fit the new filter. Then pour in fresh diesel and fill up the filter housing right to the top. Then screw on the top cap until the plastic tabs come together. Refit connectors etc. I hope this helps anyway.
Good video mate 👍
Nice tool for the sump plug👍 but I thought old engine oil was Man Moisturiser
Keep getting comments why I don't wear gloves and that it's carcinogenic
@@ORileysAutos As my old gaffer used to say “it’s better to know what killed you then not to know” leats face it Jimmy probably 90% of the chemicals & fluids that mechanic’s use are harmful to health. I spent 35 years in construction not doing what I should of done to protect my health in later years.
@@kenlarman4252I have spent simular time in the construction industry & not a lover of PPE , hands not in great shape thanks to plaster dust, cement dust & working in different environments .
I do try to use gloves,but a nightmare connecting things up as an electrician, one is expected to wear thick gloves that a knife will not cut !
19 onwards is 0w 30
Apparently updated now psa recommend 0w20
Great work sir
Thanks