Good video. Have run into this many times over the years. They have green polishing bits for Dremel that work great to polish up after fixing. I usually use a small half round/flat fine file then polish
The video I didn’t know I needed lol Had a chance a while back to trade my bike for two none running bikes but the cam caps were broken Kinda glad I held out though Thank you for taking the time to make the video
This is what happens when you don't torque it to the correct spec, someone did on my yfz450, to fix it all i did was use a razor blade to cut the sharp edge off,worked great no problems after that
I literally had this happen to my bike this past year, same bike, 07 yz250f, same cam. I picked it up cheap, wasn’t running, found the cam wasn’t spinning free. I ended up buying a new head, it was pricey, wish you’d made this video around 3 months ago
you`re the master! i'll try this on my 07 yz250f!! Thanks for all the videos and the knowledge you share! Greetings from spain!🏍🏍🏍
Thank you sir!
Glad you put this out. I'm sure somebody will be happy to find it. Comment for the algorithm. Thanks and keep it up.
Thank you sir
Good video. Have run into this many times over the years. They have green polishing bits for Dremel that work great to polish up after fixing. I usually use a small half round/flat fine file then polish
If you work on four strokes, you will eventually run into this problem. I find files difficult because they clog easily with the aluminum.
The video I didn’t know I needed lol
Had a chance a while back to trade my bike for two none running bikes but the cam caps were broken
Kinda glad I held out though
Thank you for taking the time to make the video
Thanks for watching and your comment.
Awesome vid. Im always learning new repair processes on your channel. Keep it up man!
As always, thank you for your continued support
Rooster I love the video
You give me confidence I can fix my bike
You can do it. Thanks for your comment.
Great topic!!! More valuable information!!!
Thank you
This is what happens when you don't torque it to the correct spec, someone did on my yfz450, to fix it all i did was use a razor blade to cut the sharp edge off,worked great no problems after that
100%
Man you can fix pretty much any damn thing....lol. Love the shirt man ...I got suzuki yellow ftw. Another great video.
You’re the best! Thanks for supporting me.
I literally had this happen to my bike this past year, same bike, 07 yz250f, same cam. I picked it up cheap, wasn’t running, found the cam wasn’t spinning free. I ended up buying a new head, it was pricey, wish you’d made this video around 3 months ago
Look on the bright side, you did the repair correctly. Thanks for your comment.
Nice 🔧
Thank you
What color was the scotch bright for dremel? Great video!
It was a light gray but I wouldn’t go by that. Use a fine to not remove too much material
How much do you charge for this kind of service? Im having the exact same problem. Exhaust is good but intake is extremely stuck. Shimmed to spec.
Message me at restoroosterohv@gmail.com
Already did