Worked for my 2002 grand prix after I had to chat with retailer and clear up programming instructions. The paper instructions that came with the fab stated to turn key forward to ACC and back a couple times. This video showed the need to pull out the MALL PGM fuse and than turn key back than forward than leave in back position. The remote entry fab was programmed per video and works perfectly..
Worked for me, thanks! 2002 Grand Prix GT. One thing though, not sure but I think you mis-read the fuse name? Should be the MALL PGM fuse (10A). Looks like you pulled the right one though. Top of the last column on the right. Anyway, I think the trick I learned here was to do the Acc/Off/Acc/open door/close door fast, just like you showed. My key lock cylinder has been removed already, people might want to take that dang thing out. No ill effect on the car, just makes it so you can take the key out anytime and never get a stuck key again.
I have an 01 prix gt. I bought it with the original key. If I buy this key fob, will it work on my car without me having to buy an alarm system? Do these cars originally have key fobs?
if u have electric locks and u have the same fuse like in the video and also most importantly make sure u are able to turn the switch to 1 step back cause most cars these years have the issue not opening correctly that's why I replaced the lock too with new keys.
Looked really good. Do you know if this will work for a 2007 grand prix? if not do you know anything that will, other than using a dealer to program it?
this procedure won't work on that year you will need a programmer. here is you can check this in ebay and it comes with a programmer already for cheap. APDTY 24843 Replacement Keyless Entry Remote Key Fob Transmitter w/ Programmer
Thank you for the video! By the way you have a bulb out on you Driver Information Center. They kept deleting my message when I used the abbreviation. LOL!!
This doesn't work for a 2002 Pontiac Grand Prix SE. I've tried and tried and looked and looked, and have had no success with finding directions on how to program a new fob for the vehicle in question. They all say to pull the key back, but, mine does not go back. It only goes forward. I guess at this rate, I'm going to find a GM dealer(or some other dealer)and pay them some ridiculous amount of money in order for them to do it for me.
these cars also have an issue with the ignition release switch. sometimes the key won't even get out of the cylinder and that could be the reason why you can't complete the full programming process
@@JVFIXLLC I've had no problems like that the many year I've had the car. I've always been able to get the key out of the cylinder. It's not so much that I can't finish it, I can't even start it. Looks like it might be off to the dealer for me to see if they can help.
@@jonathanbaenziger3182 I'm having the same problem. I got a 2002 grand prix and I can't get this damn thing to program. Don't know what I should do. Problem off to the mechanic
if you have your original key u just start the car first with that one and leave it running for like 20seconds then remove it and then insert the key u want to add and just start it and it will automatically program the key.
You saved me time and money from taking my car to a shop, thanks budd!!
glad it helped u
well done! you explained this really well, and easy to understand
thank you
Worked for my 2002 grand prix after I had to chat with retailer and clear up programming instructions. The paper instructions that came with the fab stated to turn key forward to ACC and back a couple times. This video showed the need to pull out the MALL PGM fuse and than turn key back than forward than leave in back position. The remote entry fab was programmed per video and works perfectly..
glad it worked thanks for watching
Worked for me, thanks! 2002 Grand Prix GT. One thing though, not sure but I think you mis-read the fuse name? Should be the MALL PGM fuse (10A). Looks like you pulled the right one though. Top of the last column on the right.
Anyway, I think the trick I learned here was to do the Acc/Off/Acc/open door/close door fast, just like you showed. My key lock cylinder has been removed already, people might want to take that dang thing out. No ill effect on the car, just makes it so you can take the key out anytime and never get a stuck key again.
yea these old cars have really tricky procedures to programming. thanks alot for watching.
worked perfectly thank you 😤
thanks for watching
My mall pgm has been out for awlile , do i have to put back for fob synch?
Hi, I can not hear the chime after the door is closed, is there something I need to check to get a new remoter programmed?
I have an 01 prix gt. I bought it with the original key. If I buy this key fob, will it work on my car without me having to buy an alarm system? Do these cars originally have key fobs?
if u have electric locks and u have the same fuse like in the video and also most importantly make sure u are able to turn the switch to 1 step back cause most cars these years have the issue not opening correctly that's why I replaced the lock too with new keys.
How do i get the fuse out? And do we put it back once were done
use so me pliers to pull it out or the little white puller that sometimes is net to the fuses. once the fob is programmed you can put the fuse back
Looked really good. Do you know if this will work for a 2007 grand prix? if not do you know anything that will, other than using a dealer to program it?
this procedure won't work on that year you will need a programmer. here is you can check this in ebay and it comes with a programmer already for cheap.
APDTY 24843 Replacement Keyless Entry Remote Key Fob Transmitter w/ Programmer
@@JVFIXLLC thanks
How about the link where you got the keys, please and thank you!
Sorry I forgot to put the link but t's already there in the description.
Thank you for the video! By the way you have a bulb out on you Driver Information Center. They kept deleting my message when I used the abbreviation. LOL!!
thanks for watching and also for that tip I'll let the customer know thank you
Will this work for a 2004 grand am?
if you do not have the fuse like the on in the video you will not be able to do it and you will need a scanner to do it.
@@JVFIXLLCany generic scanner?, that plugs in under dash with a screen I assume or?
hello, can it be done in a 1998 grand prix??
yea I believe it's possible in that year
@@JVFIXLLC Thanks
This doesn't work for a 2002 Pontiac Grand Prix SE. I've tried and tried and looked and looked, and have had no success with finding directions on how to program a new fob for the vehicle in question. They all say to pull the key back, but, mine does not go back. It only goes forward. I guess at this rate, I'm going to find a GM dealer(or some other dealer)and pay them some ridiculous amount of money in order for them to do it for me.
these cars also have an issue with the ignition release switch. sometimes the key won't even get out of the cylinder and that could be the reason why you can't complete the full programming process
@@JVFIXLLC I've had no problems like that the many year I've had the car. I've always been able to get the key out of the cylinder. It's not so much that I can't finish it, I can't even start it. Looks like it might be off to the dealer for me to see if they can help.
@@jonathanbaenziger3182 I'm having the same problem. I got a 2002 grand prix and I can't get this damn thing to program. Don't know what I should do. Problem off to the mechanic
@@jonathanbaenziger3182 this problem is not in the cylinder It is under the gear lever
You have to push in on the key before turning it to acc
Why does the light come out of the seat belts in my car and not the GDP of yours?
Do I need to have my old key to program the new key??
if you have your original key u just start the car first with that one and leave it running for like 20seconds then remove it and then insert the key u want to add and just start it and it will automatically program the key.
What if i lost my original key
Hi, does anyone know why the key doesn't go back, it just goes forward?
the lock cylinder fails a lot on these cars and i actually changed the lock on this car for the same reason too.
04 grand prix doesnt have the fuse mentioned
you can search for the fob on ebay and sometimes it comes with a dongle to program it.
Won't work for th 02 grand prix
it should work these cars have problems with the cylinder lock and sometimes won't let you complete the process unless you fix that first
This is not my car.I have a 2003 Pontiac Bonneville sle 3.8 motor