indian Scout Bobber with Dean Speed Rampage

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ต.ค. 2024
  • cold start after install of Dean Speed Rampage on Indian Scout Bobber

ความคิดเห็น • 56

  • @Gummball_03
    @Gummball_03 3 ปีที่แล้ว +12

    Makes me feel kinda funny. Like when we used to climb the rope in gym class.

  • @badbobber2165
    @badbobber2165 3 ปีที่แล้ว +8

    Just put mine on today. Coming from the Radiant GP shorty it is much tamer. When a neighbor pisses me off I’ll swap them out again. Longer rides, this is much more appreciated trust me.

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว

      They are louder than I thought with the baffles in. I'll run them like this for a while and see if I want them louder.

    • @gravellesimon
      @gravellesimon 3 ปีที่แล้ว +1

      I have GP shorties are my bike now and they are too loud. These the better way to go?

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว

      @@gravellesimon i have not heard the go's in real life so its hard for me to compare. On the highway they have a good deep sound but are not overly loud . I wear a full face so that helps too. Cruising through neighborhoods they are not overly loud either at normal throttle. If you goose the throttle they will be pretty loud .

  • @Elpescador8723
    @Elpescador8723 3 ปีที่แล้ว +2

    They sound awesome. I got York GP shorties on mine and they are stupid loud. Just ordered my Rampages this afternoon with baffles. Any popping on deceleration? Did you do a tune? Thanks.

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว

      There is very little popping on deceleration i really only notice slight pop when down shifting from 3rd to 2nd. I did not do a tune yet waiting to do intake and tune.

    • @ljml1982
      @ljml1982 8 หลายเดือนก่อน +1

      I got the rampages and had Indian do my new intake box and tune later on. There is definitely a difference in performance and worth it in my opinion.

  • @z-bob152
    @z-bob152 3 ปีที่แล้ว +2

    What does the bracket between the pipes bolt on to? I'm just wondering because I ordered a pair last week and was looking on the bike as to where that bracket would bolt to. So far I haven't seen anything. Can you run this setup by removing the stock exhaust mount or no? I too have the gp shorty's (with baffles) and let me tell you, loud is an understatement! Wanting to tame it down just a notch so I don't go deaf riding on the interstate. Sounds real good!!! From what I've seen, these should hopefully do the trick. Can't go wrong with anything from Dean Speed!

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +2

      There is a mounting plate that comes with them that bolts up to where the stock mufflers mount. I really like the sound the sound level of these. They sound great and are not overly loud at highway speeds

  • @metalmotorcycles5732
    @metalmotorcycles5732 2 ปีที่แล้ว +4

    Nice! I have the same bike inbound from Indian (2022 though) and slip ones are high on the priority list, as are the crash pegs and sliders.

    • @WarPaintCustom
      @WarPaintCustom  2 ปีที่แล้ว +2

      Have you ordered them yet? I think there is still a 6 week wait . If you are going with the Rampage you will be very happy. I get a lot of compliments on them and I ride with another scout that had Reinhart and they always say mine sound better.

    • @metalmotorcycles5732
      @metalmotorcycles5732 2 ปีที่แล้ว +1

      @@WarPaintCustom Not yet. I will likely be ordering the Pegs/Sliders this weekend. Spoke with the guys a DS this morning and it seems if just ordering those two things, it may ship a little quicker.Ordering a seat from Alex Leathercraft as well. The Bobber 20 is SUPPOSED to be deliver early June... fingers crossed.

    • @WarPaintCustom
      @WarPaintCustom  2 ปีที่แล้ว

      @@metalmotorcycles5732 nice. Hope they keep on schedule for you so you can get out there and enjoy it.

  • @wandickramirez4274
    @wandickramirez4274 9 หลายเดือนก่อน +2

    Nice sound👍🏽

    • @WarPaintCustom
      @WarPaintCustom  9 หลายเดือนก่อน

      I loved the way the Dean Speeds sounded on the scout for sure.

  • @james28if
    @james28if 10 หลายเดือนก่อน +1

    WarPaint... i have Indian Stage 1's black on my Scout bobber 2020. i'm going to go chrome and don't like a loud bike. any ideas? Stage one's are a good volume but they're discontinued

    • @WarPaintCustom
      @WarPaintCustom  10 หลายเดือนก่อน

      You are looking for something that is not as loud as the stage 1

    • @james28if
      @james28if 10 หลายเดือนก่อน +1

      @@WarPaintCustom Stage 1 are Ok but i wouldn't want it louder... thx for you response WP...its seems Dean Speed R's is the way to go with baffles?

    • @WarPaintCustom
      @WarPaintCustom  10 หลายเดือนก่อน

      @james28if I really liked the Dean Speeds they were not overly loud had a great sound.

  • @Victor4293
    @Victor4293 3 ปีที่แล้ว +2

    We want more videos of this beatifull sound.

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +1

      I'm trying to get a video together with a few other scouts to compare the sounds.

  • @maimanhi
    @maimanhi 5 หลายเดือนก่อน +2

    Where are the crash bars from

  • @Joslin2311
    @Joslin2311 2 ปีที่แล้ว +1

    Just bought my dean speed slip ons last week, do you know of any installation videos?

    • @WarPaintCustom
      @WarPaintCustom  2 ปีที่แล้ว +1

      I'm not sure of one to be honest. They are relatively easy to install the time consuming part really is getting the oem mufflers off. After that it's pretty easy.

  • @bcbsilverhawk8426
    @bcbsilverhawk8426 3 ปีที่แล้ว +1

    Love the sound. Planning on a set of these for my Scout. way too quiet in stock form.

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +1

      They are very satisfying. For slip ons they sound great. The price is perfect and thw quality is excellent

  • @Jimbobbington
    @Jimbobbington 3 ปีที่แล้ว +2

    that sounds great!

  • @orhancebi5288
    @orhancebi5288 2 ปีที่แล้ว +1

    This bike is an will be awesome for ever.

    • @WarPaintCustom
      @WarPaintCustom  2 ปีที่แล้ว

      Check out the videos of it getting painted

  • @shenal9999
    @shenal9999 3 ปีที่แล้ว +2

    Is this with baffles or without baffles?

  • @BigSmittyRiding
    @BigSmittyRiding 3 ปีที่แล้ว +1

    Sounds damn good!

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +1

      Thanks. I'm pretty pleased with the sound. I went back and fourth with what I wanted to go. The price point on these and the reviews were very good. Definitely not disappointed and this is with the baffles still in.

    • @BigSmittyRiding
      @BigSmittyRiding 3 ปีที่แล้ว +1

      @@WarPaintCustom damn! Baffles in and sounds like that is great!

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +1

      @@BigSmittyRiding yeah I was expecting to try it first with them and taking them out but these sound pretty good as is so I'm going to leave them in

  • @gdfggggg
    @gdfggggg 3 ปีที่แล้ว +1

    Nice

  • @ericw1261
    @ericw1261 3 ปีที่แล้ว

    Quieter than the Crushers?

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +1

      They have a good sound. Compared to the V&H slash

    • @ericw1261
      @ericw1261 3 ปีที่แล้ว +1

      @@WarPaintCustom Thanks. So in your video, you have the quiet baffles installed?

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว

      @@ericw1261 yes they come with them installed. I left them in to see how I liked them. Thats one thing that pushed me to these was the price and you don't have to spend an extra $100 for the baffles. I'm still very happy with the sound with them in.

    • @ericw1261
      @ericw1261 3 ปีที่แล้ว

      @@WarPaintCustom On their website they are an extra $40 - did you not have to buy them separately?

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว

      @@ericw1261 no I did not have to pay extra. I never saw the $40 option.

  • @JC-oc7um
    @JC-oc7um 3 ปีที่แล้ว

    Polaris makes a good motorcycle and snowmobile. Indian closed their doors in the fifties.

    • @WarPaintCustom
      @WarPaintCustom  3 ปีที่แล้ว +2

      I guess Harley closed their doors for a while too then in the 80's ? I understand what you are saying but if we went by the most car companies today closed their doors when they get bought out by other brands.

    • @Hendoneesia
      @Hendoneesia 2 ปีที่แล้ว +1

      @@WarPaintCustom yeah it's not like Indians weren't made a few times between the 50s and the Polaris era, either. Boomers always boomin ;)

    • @philly012
      @philly012 ปีที่แล้ว +1

      Yeah AMF made a decent bowling ball too, now they get their parts from china

  • @archerxo1
    @archerxo1 3 ปีที่แล้ว

    Meh