Part 2/2: 2013 Chrysler 300 front headlamp assembly
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2015
- Please use the following link when ever using Amazon.com. Any purchases you make on Amazon will help support this channel.
amzn.to/2mALgqS
Feel the need to write a letter or send something cool? Everyone loves getting mail!
Motorcity Mechanic
P.O. Box 240
Grovetown Ga, 30813
Please help support this channel by any means such as word of mouth, sharing the links, or by donations. For donations please click on the "support" button on the right side of the main channel page: / vipertech30813
Motorcity Mechanic is your online source of Chrysler, Dodge, Jeep and Ram repair videos. The videos are designed to help everyone from the average DIY, all the way up to the professional level tech. Make sure to subscribe so that you get notified of all the new videos that keep getting added weekly.
Check out and "Like" our Facebook page: / motorcitymechanic
Check out and "Follow" our Twitter page: / motorcitymech
Find me on instagram: / motorcitymechanic
Email me directly at david@motorcitymechanic.com
(134) - ยานยนต์และพาหนะ
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
Thanks for the fully instructional video, it's much appreciated! I also just read how to replace the HID bulbs on a '12 300S, below! So double thank you, sir!
Your welcome Mitch! Thanks for watching and for the comment. Make sure to subscribe and check out my other videos as well.
Great video. Very informative and concise intructions. Thanks
Great video, will be updated my OEM bulbs to HID with this help
+Ryan Griswold Thanks Ryan. I appreciate you watching and for the comment. Make sure to subscribe
Very good video.
Well done video, thank you.
nicely shown and explained, thx
Much appreciated. Don't forget to subscribe
Nice video, thanks
Hey David, My 2012 300 srt8 passenger side light isn't working due to water getting in the headlight due to an accident. Installed another HID bulb and it did not work. Mechanic thinks the ballast got wet as well. Where is the ballast located and do you have to remove the front bumper to change it?
Hey David. How do you aim the headlights in a 2014 300C
I just got the drivers headlight replaced and vapor is still getting in? Could you help
Hey David, great how to! Just subbed too! Also need instructions on how to align the headlamp beams so I'll email you, thanks.
I have a 2013 300c and the right headlight is aiming a little to the right there direct steering how do I re aim them.
Hello David. Would you by any chance have pictures or diagram of the lights inside? One of my lights is not auto levelling. It moves up at start up, but doesn't move back down.
I can move it manually with my hand, but something is loose or broken in there...
Sorry but I dont have anything like that. They only offer them as an assembly and they are not designed to be taken apart......supposedly but as we all know....anything is possible.
Is it possible to adjust the headlight left to right ? Driver side headlight shoots high and to the right about a 30 degree angle. I could shine coon in the trees!
Any way to replace just the head light alone?
Do these headlights come with modules ? I have seen a lot of silver looking modules under the headlight would appreciate if anyways has information
How do you adjust them up and down left and right
so useful... but how do you adjust the headlights? i have a 2012 300s
+Hector Flores I don't have a video on that adjustment at this time. If you email me at david@motorcitymechanic.com I can send you some info. I just cant attach anything here in the comments.
Where are the screws to adjust the headlight height I can’t see them
I just bought a 2013 Chrysler glacier edition and when I want to replace the headlight bulbs once they are locked in place it seems like the eyeball assembly pivots up-and-down, Also the headlight aim one side looks like a flood and the other side looks like a spot is this normal or is there something wrong with the headline assembly cause I can't get a the left side to shine on a spot on garage door from 25ft away. Suggestions
I have a question about the headlamp assembly replacement on the 2011 Chrysler 300 if this car has a hemi engine and does have the fog lamps and sensors on the bumper does that complicate the job to the point where the average backyard mechanic should not attempt it
2013 - 2021 Chrysler 300s 3.6 L V6 Are all headlight units standard fit and size?
I'm assuming you don't need to remove the front bumper to aim the lamps properly? I bought a '13 S used and my lights appear to be aimed at the ground. The horizon line of the lighting is like maybe a 30 foot viewing distance which is terrible.
If you email me at david@motorcitymechanic.com than I can send you images on where to adjust the headlight so that your happy with the aim.
How do you make adjustments to raise and lower the assembly. 2012 300S
Morning.....if you email me at david@motorcitymechanic.com I will be able to send you the info.
Hey David what's the flat rate for that do you know the shop time thanks
Afternoon. I am showing around 1.5 hours to remove one and additional 0.3 for the other while its apart. Thanks for asking and make sure to subscribe.
How do I adjust the lights? My 2017 300S came from the dealership with the lights aiming to high and I’m blinding other drivers.
Email me and I will see what I can find. david@motorcitymechanic.com
Did u ever find out how to adjust lights I’m in the same biat
Hey when changing headlight does it have a module ? I have a 2017 model
how does the light align properly.. is it self adjusting?
The headlamps have to be adjusted manually, they are not self adjusting. I can post pics in the comment to show you the adjustments. You can email me at david@motorcitymechanic.com and I can help you further.
What is that lock called if it needs to be replaced?
Why rear brake lights stay on until traction control light lights up on the dash then rear brake lights work properly
I'm stuck in a wheelchair I have to replace the totally integrated power module I cannot take the wheel off I must be another way to do it to reschedule hard reset
Video is dead on and very detail .... I have a question... I have a 2013 300... I want to change the bulb only into the HID bright bulb... so do I have to take off the entire front bumper as you did to get to the outlet?? or is their a easier way to get to it .... thanks
Thanks Jermaine. To answer your question..........You can access the bulbs from the engine compartment by removing the plastic back circular cover from the assembly. No need to take anything else off. I hope this helps and thanks for watching. Make sure to subscribe
How to open the headlights and give it a RGB custom lights
As far as I know they are sealed from the factory. I am sure there is a way for those wanting to but I have never done it myself. Thanks for watching and make sure to subscribe.
Why would my high beams blinkers side mirrors and horn won't work after replacing fuses replaced relays replaced the clock spring turn hard resets could anybody possibly tell me they've had the same problem and found exactly what the issue was thank you
I have 2014 300 v6 i am trying to adjust the headlights driver side is lower
+Ben Campos Email me at david@motorcitymechanic.com and I will get you the info your wanting. I cant attach any thing to the comments here so that is why. Thanks
Its benc762002@yahoo.com
But why you have to remove the bumper
i have a 2016 chrysler 300 limited just purchased.. i had HID lights installed and now the driver side headlight assembly is sweating.. What do i do?.. What's causing this?
Is it just when first turned on for a short period of time and then eventually clears up?
if I drive with the lights on it looks as though it wants to clear up but never fully
Not sure if it's as simple as moisture getting into the housings or something related to that light set up you installed
MotorCity Mechanic ... Problem solved.. I had a small hole drilled in to the bottom of the housing.. Dry as a bone now
I have done that in the past as well. It didn't cross my mind to mention that.....sorry. Thanks for the update.
how do you adjust the headlights?
+Sam Castanon Hello Sam. I cant attach pics here so please feel free to email me at david@motorcitymechanic and I will try to help you further. Also....exactly what year is your 300?
It's a 2013
Nobody ever posts horizontal or vertical adjustment.
Hi, the video was so informative , I'll Appreciate your kind support to help me on the same topic except that I have both FCW and fog light in the front bomberI'll Appreciate if you help me out
+ahmed fneakher Evening, sorry about the delay......What exactly are you needing to know about the FCW and fog lights? Are you speaking of unplugging? I believe that there is a main connector on the passenger side if memory serves me right. Thanks for watching and make sure to subscribe
+MotorCity Mechanic thanks for your replyactually what I need your support with is replacing the headlamp (left side) of my car (Chrysler 300c 2012) what is different that I have in the front bumbler is the FCW and fog light both are in the left sideSo is there pre-steps or pre-cousins that I need to consider ?note that in my area there in the Chrysler maintenance location there is no FCW calibration so if there is anything wrong happened with FCW it will remain malfunction- Sure I already subscribed
ahmed fneakher All you will need to do is just unplug the main connector going to the front bumper and you will be okay. No calibrations needed.
+MotorCity Mechanic thanks, but where is that main connector is located ?
I believe it is on the passenger side. You will know for sure when you start to remove the front bumper cover...you will be able to see it and then disconnect it.