Please do not adjust this trigger, it needs to be repaired by Remington or replaced. I made a video sharing how to install a new trigger. Remington 700 Trigger Recall and Install
Thank you for this! I was about to scream trying to get this POS XMark Pro trigger down to where I wanted it. I think parts like the bolt or trigger are only warrantied for 1 year. Regardless, I'm not worried about the trigger warranty. I would replace it with an aftermarket trigger before I warrantied this POS. I did get it down to 3.0 pounds as well. Which is what I like. But the trigger weight internal spring is what had to be adjust properly for the trigger screw to allow you to reach anything under 4 pounds. They knew this when they have the problems with first generation X mark triggers. All they did was set the internal screw and superglue it in place and made the adjustment screw more easily access able. They are set at 5.5 pounds at the factory. And you are supposed to be able to drop it down to 2 to 3pounds with the trigger screw. Which obviously doesn't work. So you have to go inside. Again thank you!
I’ve read all the comments. My unhappiness is the creep, definitely not a crisp break, and the overall weight of the pull. I don’t have a safe full but have past experience with other bench guns and hunting guns. I agree that a hunting gun used for 300 yards or less, mostly, has no business under 3 1/2 lbs.remembering that we’re hunting in sometimes cold conditions, no one is speaking of how temps affect the light triggers, if any. All this said I don’t believe I’m going to roll the dice and see if what I have can be made sweet. Spending a few dollars once and removing the issue from mind is money well spent. I too was spoiled with my Savage model 12 that was dialed down to three pounds, shot it well. If I wanted a real light, consistent trigger from a factory gun I’d look up a red blade trigger in an LRPV and move forward. 6 ounces to 2 1/2 pounds is lighter than my moderately trained, non competitive brain can become accustomed to. Thanks for the video, it answered all of my questions.
It's also important that you have enough sear engagement to prevent accidental discharge. You can do various test for testing sear engagement including striking the butt on the floor.
As long you don't F with the sear engagement set screw you will be fine. As long as you don't try to get it to 1 or 2 lbs. If you want 1 or 2 lbs get a Timney drop in trigger assembly!!!
I have a savage 93r17 that I replaced the trigger on...got down to 2.5-3oz but it slamfires and impact fires ONLY if I don't engage the safety before chambering the round...and will do one of the two if I DON'T engage the safety halfway through the cycle...100% of the time. Gotta take it up to 1lb to get it to stop doing that. I bring that up because it's VERY important to make sure your gun is safe. My 93 is a range gun only, it is NOT a hunting rifle. (I enjoy parking next to the 223/556 guys and outshooting them with rimfire). It's all ooooh and aaaahh with light triggers till the gun goes boom and you didn't tell it to. Don't let it happen.
I called Remington on my sps 22-250 and my 300win r5. They said neither serial number was recalled but my pull on the r5 was about 6 1/2 lb. just did this, only one and a quarter turns so it is still flush and it's now 3lb. Never go anywhere with one in the chamber soi will be checking very carefully to see if the pin has dropped before loading each time.
Great info vid. Saved me from buying a Timney Trigger for $150.00. As you said, the triggers on Rem 700 are all over the place. Whatever the assembler feels like setting for that day. I have two 700's one was ok at 3.5 the other was 7.5lbs.
Ryan, great video. I have to tell you that I am impressed with how you set up your Micro 7. The camo, the scope choice, it is a very nice piece. You inspired me to set mine up in a similar way. I did a camo paint job and mounted a PA 1-6x24 ACSS scope on it. I put a Harris bipod on the front more or less permanently as well. I did the trigger job you describe but in the end was not satisfied and ordered a Timney trigger. I shoot the gun primarily offhand in cast bullet silhouette competition and it is working out very well. Thanks again and good luck to you.
Thanks for the video. I didn't know you could do that. I just got mine and I'm used to the Savage Accu-Trigger (spoiled you could say) and was not happy with the trigger, even at the lowest setting. I did your little trick here, and now it's super light like I wanted. Thanks again! P.S. Mine didn't have anything blocking the screw like yours did (the part you had to dig out)... Not sure if that's new, or mine was already messed with... Either way, thanks!
I never really had an issue with mine. Its around 4 or more. Then again i learned to shoot on a mosin so heavy triggers don't really bother me. Nice how to
Am I the only one who can't find an Allen the correct size for the adjustment? I've gone through everything I have and nothing matches. Anyone know the EXACT size needed?
I just got my gun back from Remington. trigger was at 4.4 lbs. I tried to adjust it with the trigger adjustment screw,(though the trigger) it only went down to 4lbs. with the screw out. I tried this in the video and got it down to 3lbs. I have tried it many times and it goes off all over the place now. It goes off at 1lbs. then 4lbs. then 3 lbs. then back to 1lbs. I WOULD NOT DO THIS AS SHOWN IN THIS VIDEO. I my trigger is messed up now.
Thanks for sharing this video. When you adjusted the screw on the inside did you notice any changes in the travel of the trigger? Obviously you were able to reduce the pull but wanted to make sure there were no unintended consequences of having more travel. Let me know what you think.
I possibly don't show it correctly in the video, but I did make it as light as possible. Either way it's not a trustworthy trigger, and even worse so after I did this extra adjust meant. I do not recommend messing with it, and I've replaced it since then.
Why did you change your mind on recommending ppl to adjust the xmark pro trigger or not? Is it because they recalled it, or because of actual evidence that it is unsafe?? Im just wondering because i just bought a new 700 aacsd, and the trigger is harder to pull then a tailgate on a 80s F150! Im almost pushing sand forward with my heels when shooting off of a bench. All joke aside, Id really like it lighter, if it can be done safely. Thanks
people that are not experts should not mess with their safeties nor other people lives, this is what happened to all the dead people someone doing what they should not do turn of a screw, the Remington triggers have adjustments, but become dangerous once adjusted, because of their design. Want lighter trigger, buy a Timney they are safe, I have 700 Remingtons shot for years, triggers worked great, but I feared something happening, so I decided other people were more important than a few dollars so I replaced them, also have the x mark pro before I would adjust I would replace them with a timney for X mark pro is a cheap replacement. If you are bench shooter, below 2 pound might be okay, you are not packing it around and waving it all over the place, and probably loading it when ready to shoot, one at a time, and muzzle pointed down range all the time, but hunter needs to keep it 3-4 lbs for safety
Please do not adjust this trigger, it needs to be repaired by Remington or replaced.
I made a video sharing how to install a new trigger.
Remington 700 Trigger Recall and Install
Thank you for this! I was about to scream trying to get this POS XMark Pro trigger down to where I wanted it. I think parts like the bolt or trigger are only warrantied for 1 year. Regardless, I'm not worried about the trigger warranty. I would replace it with an aftermarket trigger before I warrantied this POS. I did get it down to 3.0 pounds as well. Which is what I like. But the trigger weight internal spring is what had to be adjust properly for the trigger screw to allow you to reach anything under 4 pounds. They knew this when they have the problems with first generation X mark triggers. All they did was set the internal screw and superglue it in place and made the adjustment screw more easily access able. They are set at 5.5 pounds at the factory. And you are supposed to be able to drop it down to 2 to 3pounds with the trigger screw. Which obviously doesn't work. So you have to go inside. Again thank you!
I’ve read all the comments. My unhappiness is the creep, definitely not a crisp break, and the overall weight of the pull. I don’t have a safe full but have past experience with other bench guns and hunting guns. I agree that a hunting gun used for 300 yards or less, mostly, has no business under 3 1/2 lbs.remembering that we’re hunting in sometimes cold conditions, no one is speaking of how temps affect the light triggers, if any. All this said I don’t believe I’m going to roll the dice and see if what I have can be made sweet. Spending a few dollars once and removing the issue from mind is money well spent. I too was spoiled with my Savage model 12 that was dialed down to three pounds, shot it well. If I wanted a real light, consistent trigger from a factory gun I’d look up a red blade trigger in an LRPV and move forward. 6 ounces to 2 1/2 pounds is lighter than my moderately trained, non competitive brain can become accustomed to. Thanks for the video, it answered all of my questions.
It's also important that you have enough sear engagement to prevent accidental discharge.
You can do various test for testing sear engagement including striking the butt on the floor.
As long you don't F with the sear engagement set screw you will be fine. As long as you don't try to get it to 1 or 2 lbs. If you want 1 or 2 lbs get a Timney drop in trigger assembly!!!
I have a savage 93r17 that I replaced the trigger on...got down to 2.5-3oz but it slamfires and impact fires ONLY if I don't engage the safety before chambering the round...and will do one of the two if I DON'T engage the safety halfway through the cycle...100% of the time. Gotta take it up to 1lb to get it to stop doing that.
I bring that up because it's VERY important to make sure your gun is safe. My 93 is a range gun only, it is NOT a hunting rifle. (I enjoy parking next to the 223/556 guys and outshooting them with rimfire).
It's all ooooh and aaaahh with light triggers till the gun goes boom and you didn't tell it to. Don't let it happen.
I called Remington on my sps 22-250 and my 300win r5. They said neither serial number was recalled but my pull on the r5 was about 6 1/2 lb. just did this, only one and a quarter turns so it is still flush and it's now 3lb. Never go anywhere with one in the chamber soi will be checking very carefully to see if the pin has dropped before loading each time.
Great info vid. Saved me from buying a Timney Trigger for $150.00.
As you said, the triggers on Rem 700 are all over the place. Whatever the assembler feels like setting for that day. I have two 700's one was ok at 3.5 the other was 7.5lbs.
Using your second screw method got me at a nice 2.5 lbs.
Thanks Pard
I used this video to successfully adjust 2 of my 700s
Ryan, great video. I have to tell you that I am impressed with how you set up your Micro 7. The camo, the scope choice, it is a very nice piece. You inspired me to set mine up in a similar way. I did a camo paint job and mounted a PA 1-6x24 ACSS scope on it. I put a Harris bipod on the front more or less permanently as well. I did the trigger job you describe but in the end was not satisfied and ordered a Timney trigger. I shoot the gun primarily offhand in cast bullet silhouette competition and it is working out very well. Thanks again and good luck to you.
Thanks for the video. Just got my 700. It came with 3 3/4 lb pull and would only adjust down to 3 1/2. Damn lawyers!
Thanks for the video. I didn't know you could do that. I just got mine and I'm used to the Savage Accu-Trigger (spoiled you could say) and was not happy with the trigger, even at the lowest setting. I did your little trick here, and now it's super light like I wanted. Thanks again! P.S. Mine didn't have anything blocking the screw like yours did (the part you had to dig out)... Not sure if that's new, or mine was already messed with... Either way, thanks!
I was on a large group buy for .223 and it just fell though today. Sucks, but now I don't have any .223. I only have components for bolt guns.
Ryan...when you are finished adjusting the trigger a coat of Clear nailpolish will reseal the screw for you...Frank
I adjusted mine to 2 3/4 pounds last night then put clear nail polish on the screw. Today at the range it has fallen to 2 pounds. Any suggestions
Jerry, I'm sorry. Right means MORE weight on the trigger pull LEFT means LESS.
What size is the screw in the trigger that falls out?
I never really had an issue with mine. Its around 4 or more. Then again i learned to shoot on a mosin so heavy triggers don't really bother me. Nice how to
Yeah, I run my current trigger around 1 pound.
1/16th but you must make sure the hole is cleaned out.
Am I the only one who can't find an Allen the correct size for the adjustment? I've gone through everything I have and nothing matches. Anyone know the EXACT size needed?
I just got my gun back from Remington. trigger was at 4.4 lbs. I tried to adjust it with the trigger adjustment screw,(though the trigger) it only went down to 4lbs. with the screw out. I tried this in the video and got it down to 3lbs. I have tried it many times and it goes off all over the place now. It goes off at 1lbs. then 4lbs. then 3 lbs. then back to 1lbs. I WOULD NOT DO THIS AS SHOWN IN THIS VIDEO. I my trigger is messed up now.
Mine was all the way screwed out and it fell out shooting it..I was pissed just dropped $1000+ on this rifel
Ryan, great video, my xmark set screw did nothing ,
Thanks for sharing this video. When you adjusted the screw on the inside did you notice any changes in the travel of the trigger? Obviously you were able to reduce the pull but wanted to make sure there were no unintended consequences of having more travel. Let me know what you think.
Not a bad brief on the adjustment but how about telling which way you turn the allen wrench????????
Put a little super glue on screw when done
Is there only 1 screw? Because on my factory Remington trigger there were 2 screws there, 1 for weight adjustment. And another one for over travel.
Please do not adjust this trigger, it needs to be repaired by Remington or replaced.
Stupid question but will this work on a 700 sendero?
Thank you so much, you heped me a lot with my rem 700!
I just read that this trigger has been recalled.
It has, please buy a new trigger, or send your trigger in for the recall.
Where can you get an xmark pro for $50? Please let me know. Thanks
Search gun forum classifieds. I have two I would gladly sale for $50
if i remove complete the screw that it is up to the trigger will i have any problem??
Don't adjust this trigger, it's been recalled. Remove it and replace it or, send it in for the recall.
Ryan's Range Report well this is very dificalt. i am from Greece Europe and and the remington dealer do not accept it. x-mark trigger
How come you didn't adjust the x Mark screw?
I did, it was adjusted to it's limit.
Ryan's Range Report looks more like heavier trigger pull on it, you have it set clockwise. should be counterclockwise, for light pull.
I possibly don't show it correctly in the video, but I did make it as light as possible. Either way it's not a trustworthy trigger, and even worse so after I did this extra adjust meant. I do not recommend messing with it, and I've replaced it since then.
Great video, what stock or comb riser is that? Is it free floated?
Why did you change your mind on recommending ppl to adjust the xmark pro trigger or not? Is it because they recalled it, or because of actual evidence that it is unsafe?? Im just wondering because i just bought a new 700 aacsd, and the trigger is harder to pull then a tailgate on a 80s F150! Im almost pushing sand forward with my heels when shooting off of a bench. All joke aside, Id really like it lighter, if it can be done safely. Thanks
Because of the recall. I had this one discharge on me, I just swapped it out w/ a Timney.
on ebay
what stock is on your rifle?
Great video Ryan
Wow thats really light lol
people that are not experts should not mess with their safeties nor other people lives, this is what happened to all the dead people someone doing what they should not do turn of a screw, the Remington triggers have adjustments, but become dangerous once adjusted, because of their design. Want lighter trigger, buy a Timney they are safe, I have 700 Remingtons shot for years, triggers worked great, but I feared something happening, so I decided other people were more important than a few dollars so I replaced them, also have the x mark pro before I would adjust I would replace them with a timney for X mark pro is a cheap replacement. If you are bench shooter, below 2 pound might be okay, you are not packing it around and waving it all over the place, and probably loading it when ready to shoot, one at a time, and muzzle pointed down range all the time, but hunter needs to keep it 3-4 lbs for safety
you saved me some cash...thanks
Thanx. Nice video.