Kubota LX3310 vs. Deere 2038R: Hydraulic Flow Test, NOT Expected Results
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2021
- John Deere vs Kubota - which tractor, the 2038R or LX3310 has the highest hydraulic flow rate? Does either tractor meet the specification stated by the manufacturers?
Tractor Time with Tim Information:
Website: TractorTimewithTim.com
Favorite Products: amazon.com/shop/TractorTimeWit...
TTWT Merchandise: TractorTimeWithTim.com/shop
Facebook: / tractortimewithtim
Sponsors:
Ken's Bolt on Hooks
www.boltonhooks.com/
Use Code TTWT for 5% Discount!
Heavy Hitch: heavyhitch.com/
Use code TTWT for 5% Discount
John Deere 2038R, 5075E, & 835M HVAC Gator
AHW LLC John Deere Dealership
www.ahwllc.com/
John Deere Parts
www.greenpartstore.com/ttwt
Use code TTWT for FREE Shipping
Baumalight 1P24 Stump Grinder
shopgreendealer.com/ttwt use code TTWT for 5% off!
Bluetooth Hearing Protection
ISOtunes link: bit.ly/2sCMOG4
$10 Discount with Coupon Code TTWT
Artillian (Curtis Cabs)
Grapples, Pallet Fork Frames, Snow Plows, Canopies, ROPS Mount Accessories
www.artillian.com/
Precision Grapple
agfolks.com/
5% Discount Using Code TTWT
Rhino Ag
rhinoag.com
Lube Shuttle
lube-shuttle.us/store
Use Code TTWT for 5% Discount
The Original Tractor Cab
www.originalcab.com/
Use Code TTWT for 5% Discount
Bucketeer loader attachment
bucketeergear.com use code TTWT for 5% off
Hydraulic Supplies
discounthydraulichose.com/ttwt use code TTWT for 5% off
Hydraulic Valves
summit-hydraulics.com/ttwt use code TTWT for 5% off
Deck Dolly Mid mount mower storage solution
deckdolly.com use code TTWT for 5% off
Limbsaw
limbsaws.com use code TTWT for 10% off
Terra King TKV20
Mention TTWT when placing your order at terraking.com for at LEAST 5% off on your TKV20! - แนวปฏิบัติและการใช้ชีวิต
Another great comparison video! Ken is a real asset to the GTT forum and has helped me a couple times regarding fittings etc.
The outtakes were hilarious! Great information here. Tim, I've learned so much about compact tractors from your channel.
Maximum engine rpm should be verified when measuring hydraulic flow. Engine speed directly corresponds to pump output.
Good info in that video. Looking forward to the 1025R tests. Thanks for sharing!
I think it's great you get to test and work the tractor, implements, hydraulics, exc. Very informative and honest point of view
Interesting video, and I'm here to tell you, Ken's Bolt on Hooks is (or is it are) the first modification every tractor owner should make to his or her machine. They are truly a game changer, the grab hooks make the factory bucket a LOT more versatile.
love the tim & ken team together!! great show guys
Great job, very interesting. Love the outtakes!!!!
Great video, love seeing the flow meter tests.
Great job guys!! Love Ken’s products I have a 2025r and have quite a few of them they are all great. Keep the videos coming Tim👍
One of the most informative videos I’ve seen. All are informative but this may take it up just a notch thank Tim.
Great video and very informative! I love the fact that your cat came over to make sure the test was done fairly and accurately!
This was well done, good video. You hit the important point though at the very end, most of the time this just doesn't matter. We have few implements to put hydraulics to use on these small tractors.
Yes and no. The problem in a way is the SSQA. We get lulled into thinking that if we can hook up to it, we should be able to use it and that is not true. Some implements are designed for tractors and some are designed for skidloaders.
That was informative , regardless of the tractor color. Good to the very end. Thanks all
Great video Tim. Very interesting. Bring back Ken any time. And yep, I agree with you guys. We need more hydraulic flow so we can do more work.
Thanks for doing a good unbiased comparison once again!
I really like the technical videos like this.
Totally agree about the “more flow”comment. At least you know a guy that can sort that out on the 1025R at least. 😉
Tim, I'd like to see you check a Kioti compact. The CX2510 you tested earlier this year, on paper, says it has 11.3 GPM of total pump flow.
@@rebelcitysports1outlook713 the thing to be careful about is what do they mean by total pump flow. If they are talking about charge pump flow for the hydrostatic transmission, steering flow, and implement flow, what may start out as an impressive number may result in less impressive performance. Disclaimer: I'm not saying this is true of Kioti, just saying this about general marketing gimmicks used throughout the industry. Find out what exactly constitutes "total pump flow" and see if you can get the important spec of implement flow, i.e. the flow that is used for loaders, hitch, scv, and power beyond attachments like backhoes.
Sure like this " ln depth-hands-on-Tech-Talk" stuff. Proveing what really is going on & what is "happening". Just "saying" these "little tractors" with an manufactures embarrassing flow of 5gpm need "supped-up" to 8 or 9 gpm before they leave the factory. Thanks for the great vidio Sir and happy safe Tractoring.
Great comparison
Parasitic pressure translates in to heat. When using the accessories where parasitic pressure would be present, it would be advantageous to monitor hydraulic oil temps. Great Vidya.
Loved this episode.
Thank you
Just adding tube length with bends and un smooth fitting transition will add restrictions and slow flow. Still, I think this is a good representation of what to expect through implement. Well done.
Hi Tim
Thanks for the video on how and where You took the pressure readings
I know My L2501 is not a commercial grade piece of construction equipment and has it limitations, and I learn a few for each time I use it
We took down a tall tree with a rented 43 foot lift for $350 ( Tree Guy said He could have used a 50 footer ), that was about a 60 to 70 foot tree with large limbs that went over one of Our rental Mobile Homes
The hint it needed to come down was one of its large limbs laying across the driveway
I rented it and Our Tree Guy did His Magic Skills
It took a total of 9 hours with Zero damage and zero injuries
What a huge pile of stuff
I used the Forks on My L-2501 with the BH-75 on the back and moved all the Mess to the rear of the property with no problem
When it came to moving the large trunk sections that were about 5.5 feet long and a diameter of about 2.5 to 3 foot the Kubota would not even budge it off the ground
Would not even curl it
We expected that but We had to try
Cut in half it was easy to lift and move them
I have seen videos on YouTub where they adjust the Pump Pressure to increase it, but I am old school and if the Manufacture set it to protect their equipment then they are protecting My wallet
The Tenant and I helped the Tree Guy from the ground where the Tenant worked the line that controlled dropping the limbs
I'll be 67 in September and I know My lower back has issues so I would have used the tractor, but they wanted to muscle it manually and that worked for them
I have been a Supervisor and I know when to surrender leadership to those that know what They are doing and not to Micro Manage from the sidelines
The Tree Guy knows How to cut and swing parts of the tree safely and I highly recommend NO ONE EVER RISK this as a DYI Project
Knowing how to do the job safely is not learned by ON THE JOB experience on Your own
The height, weight dangers are REAL and the knowledge on how to plan the cutting is way to valuable
He said bringing down that Double Tree He would have charged $2,000 , and if I tried it and dropped a large limb through the roof that repair would have be more than double the $2,000
He gave Me the Landlord discount because I rented the lift, provided Tractor and labor, plus He did not have to cut it up smaller and haul it off
More work for the retired guy
Ken in Florida
Stay Safe
I like my chain buckets and 5/8 set back imatch hook. I have not tried my pressure gauge.
Great info for us compact tractor owners. Thx...
Parasitic pressure loss only occurs at a flow rate (hydro-dynamic). When the grapples clamp shut against an object, flow becomes zero, and the pressure inside the grapple would = pump relief pressure (hydro-static). So no performance loss unless you're trying to run a motor off the diverter valve (very rare).
Thank you again for some good information
The cat just has to get herself in the vids. Great demo.
So is it safe to say the old rounding up or down method can be applied here?
Does the diverter valve have open center valves, or is the pressure going back through a relief valve. That would be the reason you get the high pressure on the flow of the diverter.
I bet you guys were under a lot of pressure making this video.....but it flowed well......get it....lol.
Would like to ask where in the system (flow/power/working power) a change in the flow rate you tested there and the advertised 11.7 max with 1631 lbs of lift at 24 in aft of hitch, (CK 3510 Kioti). I really enjoy this type of video. And thank you and same to Ken for his part.
Very interesting to see the difference in hydraulic flow between the two tractors.
very helpful, learned a lot.
I’ve had two L series tractors.. a 2501 and now a 3902 …love the tractors other than lift capacity. I checked pressures at the loader and was right about 2100 psi under load…I bumped it up to 2600 psi and made a big difference! Not sure what the limit would be but now it’s acceptable for the size tractor!
Check the flow on the Ventrac it has a different kind of hydraulic pump.
How “Flow” can you go? Very interesting comments and observations. Indeed, as you both pointed out, increased hydraulic flow would be a boon to handle many more attachments that could be accommodated. Blessings to all.
Great info....thanks
Good point about horsepower vs hydraulic flow. If these Tractors had about a 1/3 more lift people could get considerably more work done but I think Deere and Kubota want to keep these smaller Tractors under scale to make consumers buy bigger Tractors. It’s all designed like eye candy to constantly reach to the next level. To me this was an honest review with just facts. Hard to argue with the results other than, perhaps do the same tests with another meter than just the Webtec to see if the results would be the same. It would be interesting to see what Neil would say about this.
Can you imagine these smaller Tractors with double lift capacity than what they are? They would be awesome. One would say the frame would not support it. Reinforce the frame. Good video guys. Thanks for sharing.
These tractors can barely handle the loaders and hydraulics they have. You need a tractor with more weight and stronger components to handle bigger loads or you will be disappointed when you overload and break it. Particularly the front ends are weak if you get a massive load in the bucket and get it strained pretty easy to tear up front axle components.
@@bcbloc02 I agree.
And here is right the misconception. Hydraulic flow (volume) does not affect lift capacity (weight).
I didn't watch the other video that Tim mentioned about hydraulics. I'm sure it's covered there. It's basic.
It's very similar to electrical circuit analysis. You are measuring open-circuit voltage (pressure) and short-circuit current (flow). To your question/musing about the losses at the loader and what that means....you guys have it right. In the end, your maximum pressure won't be different since as you reach a point where the grapple and/or loader itself stops moving, your flow is zero, thus you are getting no losses (resistive losses in electrical parlance) so you will be seeing open-circuit voltage (maximum pressure regulated by the relief valve). The resistive/parastic losses are only manifested when you have flow...so it just means that you'll move slower under load than you otherwise would, but it won't affect the maximum amount of lift of the loader or the grabbing force of the grapple. Ken's using the right terminology...it's not affecting the amount of work you can do (Work = Force x Distance) but rather it is affecting the Power available to do the work (Power = Work/Time). And just like an electrical circuit, there is a "sweet spot" where you can obtain the maximum amount of work per unit time by balancing the amount of flow available through the various restrictions (therefore affecting the velocity of moving whatever you are moving) with the pressure (affecting the mass you are moving) along with the load. In circuits (as you probably know) this is referred to as impedence matching. This would be most easily demonstrated with a rotary implement where you could monitor rpm under a variable load but you could probably create a demonstration with lifting things and timing how long it takes to lift while adjusting pressure and restriction along with the mass you are lifting between tries. Anyway..great video...I appreciate the good info you share with the community and the lengths you go to in order to provide real-world experimental data versus just trying to "bench race" with spec sheets.
Tim this great information
Tim, I hooked my John Deere RC1260 to my Land Pride QH10 on my Kubota B2550 - All works fine as I expected...... I hope you do some videos to demonstrate to your audience to not be afraid to get the best deal.
who has ever been afraid to get the best deal?
Still learning from Tim and friends... :)
Very eye opening on down line add ons
Great video!!!!
Do you know anyone with a Kioti or TYM you could also test?
A worn gear pump will deliver all of its flow at no or low pressure. Key word is "worn" and not "damaged". Wear causes slippage past the gear and housing, which happens when pressure is present in the circuit. They symptom that you'll get when a pump is worn is that it won't build full pressure.
For example, I have a 1025R gear pump that I have worn out due to a bone headed mistake. It was only a few seconds, but steel gears don't take long to wear a grove in an aluminum housing without sufficient lubrication. The pump will still deliver 3.5 GPMs to the power beyond, but will only build ~1800 PSI regardless of the PRV setting. This is basically the procedure for testing if a pump is worn.
I know the JD has gear pumps, but not sure about the Kubota, but regardless, wear should not be a concern on these basically brand new tractors.
Love this episode and series. Great work and can't wait to see what's next. Also, I'm jealous of the testing setup Ken has created. It does it all!
Thanks for the info, Kevin! That is helpful.
It's very interesting to me that everyone is so worried about more pressure. No one has mentioned that you can have much more force from a system with 1500psi than one with 2000psi... It all depends on cylinder piston diameter. So your loader may be able to lift more with a tractor that has a lower psi.
Of course with a bigger cylinder will have less speed so will need higher flow.
The higher psi the more chances for leaks, shorter pump life, more power to maintain psi available.
Just something to think about when comparing sometimes more is not necessarily better.
I agree about compact tractors can always use more hydraulic flow.
Tractor hydro pumps are positive displacement pumps. This means the flow will not change with changes in discharge pressure. Very important to have a relief valve in the discharge of a pd pump.
well done
I own a small Kubota B2401. Someday I'd like to replace the gear pumps with an axial piston pump.
Engineers: "Sure, we can design a 10 GPM pump for any of our tractors. The 1 Series engines on up all make plenty of torque right now."
Analysts: "A high flow CT model will be feasible at an increased manufacturing cost of 3%, but will undercut our medium tractor sales by 3.2%."
Management: "TEN GALLONS A MINUTE?? NO compact tractor owner needs that much flow! Have the dealers point customers towards our medium tractor models to better meet their needs. They can upsell a gooseneck trailer while they're at it."
To bad you two don’t get along. Lol fun video thanks. Stay safe
The machine with the extra valves and fittings that generate paracitic pressure is going to generate more heat. someone needs to develope an auxillary pump and resivor to connect to themid PTO.
5:26 that lift arm actually look like its made with that angle already built into the arm? I could be wrong but it does match the other side perfectly.
Hard to see from that angle, but it is bent. The threads will no longer work.
It's bent for sure
@@TractorTimewithTim Does the Maschio Flail Mower float or does it push against the tractor if you run the end over a hill? If the mower does not float (I think it does not) it would create a missive upward force on the right side lift arm. I am surprised there wasn't more damage.
It has a float mechanism.
I been investigating using a larger flow pump on my tractor. looking at one that may physically fit if the RPM is correct. thats the part I'm not real sure about.
Remove the governer and find some ways to increase hp
@@RiverValleyLandscaping I really dont feel like more HP is necessary. I would like to look into adding a granny gear to the HST drive. make it a tugging beast!
Excellent video! Very informative.
Weare shopping for a flow meter right now because we are sick and tired of bringing equipment to the dealers to be serviced .After seeing this flow meter I think im going to purchase the digital readout flowmeter its way more accurate
Would a manual transmission have higher gpm?
Mother Deere probably puts the pump on a test bench with no restrictions and your testing with hoses and connectors to lose the bit of flow.
Kubota, bent lift arm, minus 10
Hello Tim.. have you worked on hydraulic Lines for 1025r backhoe controls ? Mine seem to be backwards
backwards compared to what? There are two control standards. Perhaps you are used to the other standard?
@@TractorTimewithTim yes I'm used to the other standard for cat machines.. can the lines be switched ??
too bad your not closer, i have the webtec HPM system, works great for reading flow, pressure, temp and date logging it along with a instant digital readout.
Very new to tractors in general so forgive my ignorance but I have a silly question. Is it possible to have so much flow that it would out perform the size of the tractor and implements. Or am I confusing power with flow? Are they synonymous? If you gave the 33HP tractor too much lifting power to the FEL could you create a dangerous situation?
flow = speed; pressure = power. increasing flow will only change the speed of movement, not the lifting power.
@@TractorTimewithTim gotcha! Thanks for the clarification.
Couldn’t agree with you more ! I have been spoiled with skid steer hydraulics and all it’s possibilities. I also have a 46 year old JD backhoe loader with less than 40hp but 30 gpm hydraulics . Doesn’t look like progress to me !
…but these machines are much less expensive than the 30gpm machines.
Hey Tim, I was wondering if that low of flow matters with a hydraulic feeder on a chipper?
It might. Is there a spec listed for ‘minimum flow’ on the chipper?
Most of the newer chippers have a self-contained hydro system, only a PTO shaft connects to the tractor.
@@kdeckster Our WoodMax is that way. Simplifies it for sure.
@@pohbor5788 Yup, We have the WoodMax MX9900, it's a BEAST!
@@boltonhooks2149 We only have the WM8H, but works great too. Looked at the USA made MX's like yours, but just couldn't justify it. Maybe we'll be sorry?? Thanks for replying!!!!
9:40 could you find a machine with thousands of hours and test it to see how much performance loss their is?
These little "tractors" in 90% of cases are lucky to SEE 75 hours a year. This is the "quality content " ( very little) manufacturers consider= low low hours easy on warrenty claims. These pitiful low hydraulic ratings keep things "safe" for the reckless "home-loaner". 80% of these small rigs NEVER get paid for and are put on the Block with just 150 -250 hours. They are really not "serious machines"; just made and marketed for " hobbyists & make-work enthusiasts ".
@@donaldstrishock3923 I wish this wasn't the case. I don't have a lot of land 6ac and I don't need bells and whistles. I need function in a smaller size. One machine, mutli function performance over comfort :/
@CF Sapper compact tractor would be perfect for you. Don’t listen to Donald.
You can accomplish most everything you’ll need on 6 acres. Nothing more versatile and fun than a compact tractor. Of course construction equipment is tougher…but it also costs 3x as much!
@@CF_Sapper Well, Sir a small tractor of "any sort" is a GREAT Helper. These "buggers" are just so expensive-- with the exception of their longevity over the long run;; aka. == many years of handy & reliable service. Best Bet is the closest brand-dealer that is highly recommended by your associate's. Best wishes with your endeavours.
@@TractorTimewithTim Sorry Mr. Tim & Mrs.Christy, no misguidanse intended for your followers. Your expertise is almost infallible. You Guys are the "Best" of " top 5. And l Always like the Scripture Readings at the end---100% Top Notch all-together.
Like an old man once told me, a tractor is just a self-propelled hydraulic pump.
Yep. The very first iterations were self-propelled PTOs, with steam cylinders and big leather belts to run your sawmill or pump....
Does your LX3310 not have the factory third function setup for the loader? I’d be curious to see how the factory (“true”) third function compares to the diverter system you have on the Deere.
I have it...but not yet installed. ...still in the box. I can say that while it is still in the box, the flow rate is ZERO :-)
Thanks for the morning chuckle! I too have several things “in the box” still waiting to be installed. And as my dear wife would remind me, some of those things have been in the box long enough to exceed their “best before” date! (Like the roof racks I insisted that we buy for the car that we traded for a different car 7 years ago LOL!)
It seems the after market has failed to address the hydraulic flow and pressure needs of sub and compact tractor needs. I don't know why a hydraulic pack hasn't been developed that fits where the mid mount mower sits. A small tank and a pump. Could attach just like the drive over mower. Could produce very high flows without affecting the existing tractor components.
You guys did an almost great job. The points you missed surrounds your test setup. Analog gages typically have 0.5% error OF FULL SCALE so +/-0.75 gpm. That alone could account for it. And when was it calibrated? Or had the actual zero checked? Either could account for another 0.5 gpm so your test rig is probably +/-1.75 gom accuracy.
With those limits you can’t really say anything other than “looks like the manufacturers are accurate as best we can tell”. You definitely cannot claim they are 0.3 or 0.7gpm low.
The reason you see no difference between the loader and PB is because they are the same circuit. Look at your hydraulic diagram. For the 1025R, one comes from the pump through a proportional valve to split the flow for steering and other hydraulic implements. This maybe why you are not seeing the full spec flow since you are missing the flow that is redirected to the steering and oil cooler circuit. The other hydraulic circuit that you were measuring is an center open spool circuit that comes from the proportional valve to the SCV, third function, Power Beyond, the 3pt, then return to reservoir. So the loader and PB should be the same.
An interesting experiment would be to look at the blue loader line that has a restriction orifice to see parasitic pressure. You should see pressure when the loader is raised (when the system is actually doing work). When the cylinder is not moving you may not see any parasitic pressure.
Why use a Dirverter on the 2038R rather than a third function. I have the WRLong third function kit very happy with it.
Factory 3rd function wasn’t available at the time.
So far, my experience is that a diverter is about the same as 3rd function on these small low-flow machines.
In theory, 3rd function would be much better, but in practice, not much different.
These manufacturers could do it if they wanted to Williams offers a 14 GPM flow
4000 max. PSI
1300 max. RPM so how hard would it be for them to do it
Or add a PTO pump?
Yes that was very informative, thanks guys! Hey TTWT, I ordered two ISO Tunes products yesterday, wanted to give you shout out for that. I used code TYWT but “Honey” came up with $6 more savings, sorry I tried guys 🤔😎👍🏻 When are you going to start the content on “how you earn income” with compact tractor business? I’m guessing with all these implements coming your way and the orange tractor comparisons list that’s a bit down the list? God Bless✝️🛐
if you started at isotunesaudio.com/ttwt we would still get credit. ....if you didn't add the ttwt, we would not get credit.
I'd like to see Kioti, Mahindra, Tym, and Branson comparison with the same tests against JD, and Kubota.
What do you have against Massey Ferguson? :)
My Kioti ck2610hst is supposedly rated at 11.7 gpm hydraulic flow. Gotta find a Kioti to test the flow on, and if it would run some implements better then the Kubota. Is more flow better?? Thanks.. central Maine Dan..
Does that include steering?
That is total flow. Not sure how much is shared with power steering, if that is what you mean.
That is indeed my point. Your 11.7 number is useless information, as it is not available to the implement.
Not picking on any brand but was that 4.5 gpm max for the Kubota not running any implements or power steering. If I hooked up my tractor, should it say about 11.7?? Or am I totally missing something?
@@danielclapp636 I believe the Kubota has a separate pump just for the steering. Most likely other manufacturers as well.
implement flow on my Branson 2515h is 9 gpm. It has 2 hyd. pumps.
total flow is 9gpm? Or implement flow only?
@@TractorTimewithTim Total flow is 13.8, implement 9 as advertised.
My question would be can the pumps be upgraded or even turned up sounds like they turned it down if it's supposed to be at 5 but sounds like the the boat of people turned it down because it's being installed by them I don't know maybe maybe you can come up with an answer or let somebody let us all know but moves very good okay God bless this is Bob and Vero Beach Florida have a great day
No, there is no adjustment on volume. Our gauge may be off a bit, or perhaps the spec is ‘theoretical’ with practical seeing a bit less.
Question: I have a JD 1025r and I was wanting to know if anyone makes a “Flow Control” that would slow the decent of the bucket when loaded? I know it is feathered with level, but it still goes too fast. Particularly with me in a man lift and my wife at the controls.
You should be able to install some inline orifices on the down side of the lift cylinders. They make inline adapters that will restrict flow. Farm equipment used them a lot until tractor pumps got more advanced.
--Note, that this will likely slow down your lift also because fluid has to go the other way when filling the cylinders back for lift. It shouldn't affect pressure capacity though.
@@emerkamp1 thanks
You are one brave man!!! I honestly am not sure how much I could trust a sub compact tractor holding anything in the air especially a person with the wife at the controls lol
@@RiverValleyLandscaping we been married 44 years. Lots of confidence! In the tractor.
@@RiverValleyLandscaping seriously she is very good the the controls, she could use a little more practice but she is getting there. Tree trimming is the next project.
Your 20% gpm drop from 3/8 inch hoses and fittings to 1/4 inch hoses and fittings match what 'Torque Test Channel' saw using air hoses and fittings!
Except we had 1/4” at both tests.
@@TractorTimewithTim I was thinking about the front diverter block test with 4 gpm. Your right about the loader test being 5 gpm.
car manufacturer measures h.p. at the flywheel, to get higher numbers and lose about 10% at the wheels on a dyno. I'm going to assume tractor manufacturers are measuring flow rate at the pump outlet and not the end of the line...the difference in numbers are too consistent
Tim, I’d like to see a comparison between the Kioti CK3510 and your Deere in this same manner. Kioti rates their pumps at 11.5GPM!! Is this fact? Or just marketing??? Their tractor is priced much lower than Deere as well. What is your thoughts on this?? I’m asking because I’m researching a tractor purchase and your videos have been super helpful in the process! Thank you.
11.5 combined with steering, so no, it is not apples to apples. Would love to test the flow on a CK3510
@@TractorTimewithTim I’m interested in that size of tractor specifically. Kioti, Deere and Kubota as well as TYM are all brands that I’m looking at. I’d like to buy something that’s capable, well featured and don’t break the bank. I see Kubota and Deere lots on your channel. They’re premium brands though with premium prices. When I got a quote on Kioti it was basically 10k less than the orange and green brands. TYM is priced comparably. I’m struggling on what brand to choose. Saving money is nice….. but I want to make sure the tractor will do what I want it to. Landscape work, backhoe work and lift heavier logs onto a sawmill are going to be its primary function. It looks to me like Kioti has the highest lift capacity and I was wondering if that was related to the hydraulic flow.
Kioti claims 11.3 gpm on the cx2510 , it would be interesting to test one with Ken's machine.
Would love to do so.
Specs can be misleading in how they are expressed. Your Kioti has 11.3 gpm listed as total flow from a tandem pump configuration. One pump should be steering flow and the other pump should be implement flow. The flow from both pumps would total 11.3. Kioti does not break that spec down to show the flow of each pump separately on their website.
My Kioti CK3510se is rated for 11.7gpm. About the same size as the tractors in this video
Already addressed in the comments...repeatedly! 11.7 total...including steering.
I apologize Tim, didn't mean to upset yohu
Not upset. Just surprised that ALL of the misconceptions about TOTAL flow vs implement only flow use this one machine as example.
There is probably insurance reasons for NOT putting a massive hydraulic flow pump on a compact tractor, and more so on a subcompact. Imagine tripling the GPM flow rate on any tractor, and its not too hard to envision some guy running an attachment WAY to big for the tractor and getting injured or killed.
So it seems on the John Deere when using the grapple the only concern would be hydraulic fluid temperature with the parasitic pressure being there all the time...
Grapple use is sporadic. Would not expect issue.
Like comment and subscribe for more detail testing videos, love seeing theses for comparison. Keep these great videos up.
Seeing the temp rise may say something of their cooling capacities. Deere always boasts of having better cooling so they do not "cook" their trans fluid.
That’s surprising I thought Kabota had their pumps turned up to max
Increased oil flow requires a bigger pump which requires more horsepower which requires a bigger frame . point being the small tractors will probably break. Because you will probably try to do more than the tractor frame can handle. I know I probably would.
At 11:27 you can see Tim's disappointment in the co-host for stating the fact that the loader for the Deere was under 5.0 gpm, not 5 gpm. Tim is definitely slanting toward the John Deere tractors. 😂
What would cause high pressure, but weak hydro transmission in an X748? Anti cavitation screens partially blocked? Or something else?
Could be many different things, to much to cover here sorry
Seems like more hydraulic flow on a compact tractor would cause the 3pt and loader motion to be “jerky”. An example is when operating the backhoe at idle vs full throttle, you can tell you’re getting more flow and controls can feel jerky at times. Imagine if you doubled your overall flow and your loader tried to swing a lot quicker, seems like things would get out of hand pretty quickly.
Do you have the older 260 backhoe? I found it too jerky to use at higher RPM. I can use the newer 260B at full throttle with no issues.
One can always use restrictors in the lines where necessary to slow the flow.
@@TractorTimewithTim I had a John Deere 2520 with 46 backhoe and it was jerky at high RPM. Interestingly the 2520 had 10.5gpm total flow which seems relatively high for a tractor of that size so maybe that was part of the reason? It would operate fine at idle or just off idle.
That could be fixed with better valving.
270B has a sticker on the left rear stating maximum flow 5.3GPM and maximum pressure 2640 PSI. Is there a similar sticker on the 260B, and has anyone seen any issues running that 9.5 upgraded pump?
Why don't they have the higher flow?
That flail mowers movement was violent. It sold me not to have it on my 3039r
Oh, a 3039r would handle it fine. We need to put some restrictors in the lines.
Good job guys. Really disappointing to see the Kubota didn't meet specification at the power beyond port. You know I'm a Kubota guy, but I appreciate all brands. Thanks again for the test.
it could of been the gauges, or any number of things, or the fact the Kubota is new and the first 50 hours are run in time, the 50 hour service allways sees filters with metal, which is normal for a run in period.
@@Shane_O.5158 very true.
You guys are funny. If I had bought used, you woulda blamed it on being used!
@@TractorTimewithTim LOL
@@TractorTimewithTim I think the flow is low on the specification. Using your Deere as a baseline, and being that it is registering at specification, that would lend to believe the Kubota is low. Power-beyond should be the best place to test as it offers very little restriction. You know I'm not one to defend poor performance, so if it didn't perform, it didn't perform. I just didn't want to disregard @Shane Forsythe thoughts.
What happened to your big tool rack?
Still have it.