There's a video out showing how to bypass limiter on a 2018 Raptor and the guy does the same thing as this guy pretty much but in a better way. So if it works on a 2018 should it work on a 2020?
If you have a optimizer do you need to do this? stock bike when I got it hit 72 mph and with hmf slip on pipe, K&N filter, optimizer, I hit 77 mph and I did this today see if I hit more lol I was curious and I hit 83 mph 🤷🏽♂️🤷🏽♂️
@@Rvega559 that's really good, I'm getting the Big 3 package from monster, FCI, PCV and shorty to be exact and I weigh 155, I've hit 79 stock so I'm hyped about how much speed it'll gain
Hello there my name is Hugh from Ireland what years from to will the speed limiter bypass work on Yamaha raptor 700 ? And with that done how many extra mph should it gain and do you still need to clutch when changing gears with this mod done. Thanks Hugh
So I replaced my stock bars and clutch lever on my 2019 raptor 700 is it bad if I just tuck it away or should I try and rig something so it works with the aftermarket clutch lever.
Hi man I was wondering if you can help me I have a Taiwan made atv it has a 150cc engine I was thinking about power mods but I don’t know anything to put in it I though about a exhaust but there is no one that makes exhaust for these so if you can help me that will be greatly appreciated
Unfortunately there isn't much you can do for more power really. There's only so much power you can squeeze out of an air cooled 150cc engine. Might try and remove some baffling in the exhaust? That might open it up some, good luck!
You can not tune it by hand. You need a power commander. It is fuel injected not carbureted. You can adjust the idle but if you're trying to do actual tuning you need a EFI controller
Yes this is a clutch button and no it’s not a speed whatever limiter. It simply allows you to start your four wheeler in or out of nuetral without needing to find neutral in the trans. So let’s say you upgrade from stock to some pro tapers with a single clutch cable like I did and you buy a clutch reverse bypass switch. Boom just got rid of that second clutch cable. It’s funny you can clearly tell this guy has no idear what he’s talking about
Hi there I have a raptor 700r 2006 and have a issue with it .the like previously had a 12t front and 38t back sprocket although I changed the front sprocket to a 15t .the bike was running good although I experienced a problem with the bike loosing rev at high speed so I adjusted the tps sensor and the bike came right although when the bike had its previous 12 and 38 set up the speed topped out at around the high 30s around 130. Now with a bigger front sprocket I'd expect to have more speed although now the bike stops at around 114km/h .I've removed the clutch sensor to bypass the top speed limiter although the bike still stops at around 114.The bike has a set of 22s in the back Just to refresh the problem When I had 12t and 38t sprockets and a 21inch tire the quad topped out at 130 above When I added a 15t front sprocket and 22inch tires the bike tops out at 114 The only thing I did in between was set the tps sensor back to specifications of 0.68 as it was on 0.77 and with full throttle around 4.10 Any ideas why my top end is so low
Thanks man. I'm a new guy to all of this, but love your stuff & would like more than 1 video per week please!
Works on 2006 thru 2014, does not work on 2015+
Did u fig out the 15+ mod for this?
There's a video out showing how to bypass limiter on a 2018 Raptor and the guy does the same thing as this guy pretty much but in a better way. So if it works on a 2018 should it work on a 2020?
Got some wheel spacers there must love to drift 🤘
If you have a optimizer do you need to do this? stock bike when I got it hit 72 mph and with hmf slip on pipe, K&N filter, optimizer, I hit 77 mph and I did this today see if I hit more lol I was curious and I hit 83 mph 🤷🏽♂️🤷🏽♂️
What year is your quad
2020. I upgraded my parts full monster exhaust, pc5, 15T sprocket ⚙️, FCI intake
@@Rvega559 you hit 77 modified?
@@israelrosas9440 i weight 250 and I hit 85 mph full monster exhaust, pc5, 15T sprocket ⚙️, FCI intake and hotcam 3
@@Rvega559 that's really good, I'm getting the Big 3 package from monster, FCI, PCV and shorty to be exact and I weigh 155, I've hit 79 stock so I'm hyped about how much speed it'll gain
I did it to my 2020. It seemed to do nothing imo.
it helped me in higher gears on my 2020
How fast will the bike be after we do that !?
i needed this video
I have a '14 also and I did this mod last year..... Big difference in 4th and 5th!
Hello there my name is Hugh from Ireland what years from to will the speed limiter bypass work on Yamaha raptor 700 ? And with that done how many extra mph should it gain and do you still need to clutch when changing gears with this mod done. Thanks Hugh
where can i find those handle bar mirrios what you have on your raptor ive been trying to find them forever
Is there kits for all atv and if yes what link do you use to buy these?
I have a 2017 raptor 700R. Do you know if this mod would work on mine? I find myself revving very low in 5th gear and it's annoying.
Take off your silencer on your exhaust and take off the lid to your air filter bokx
@@bluberrywonder3974 😂
Good afternoon.
What model and where can I buy a tachometer to tune my raptor 700's idle
Just adjust the idle screw💀
What is the difference?
I have a raptor 350 and a 660 big bore kit with a full fmf powercore exhaust and with a racing clutch can I remove the bypass??
will it work on a 12 yfz 450r? thanks for the video!
Are you insane and it goes fast enough
😐 no its never fast enough
Does this work on 2020 raptor 700r ??
Did you ever find out if it works,i have a 2020 also
I got a 21 curious as well
So I replaced my stock bars and clutch lever on my 2019 raptor 700 is it bad if I just tuck it away or should I try and rig something so it works with the aftermarket clutch lever.
ziptie it away its fine
Hello,does it works on a 700R 2018?
Will it harm anything if you do the bypass system and the check engine light is still on ? Asking because I have a 2020 700.
Does not work on 15 and up
yes it does work I've removed on my 2020
What about a raptor 90 ? /yz90
So how's that a peed restricter
Hi man I was wondering if you can help me I have a Taiwan made atv it has a 150cc engine I was thinking about power mods but I don’t know anything to put in it I though about a exhaust but there is no one that makes exhaust for these so if you can help me that will be greatly appreciated
Unfortunately there isn't much you can do for more power really. There's only so much power you can squeeze out of an air cooled 150cc engine. Might try and remove some baffling in the exhaust? That might open it up some, good luck!
MotoPosh what about a 300 cc engine ? Beelinebestia
Mustafa vlogs get a bigger ATV
HOW CAN I TUNE THE RAPTOR 700R INTAKE WELL - IT HAS A LEFT SIDE SCREW THAT IS FROM THE AIR.
AS THE TUNE
????
You can not tune it by hand. You need a power commander. It is fuel injected not carbureted. You can adjust the idle but if you're trying to do actual tuning you need a EFI controller
Yes this is a clutch button and no it’s not a speed whatever limiter. It simply allows you to start your four wheeler in or out of nuetral without needing to find neutral in the trans. So let’s say you upgrade from stock to some pro tapers with a single clutch cable like I did and you buy a clutch reverse bypass switch. Boom just got rid of that second clutch cable. It’s funny you can clearly tell this guy has no idear what he’s talking about
Does it damage the engine
Did it work maybe another top speed video will help
Already done! th-cam.com/video/Se-YLXAeGCY/w-d-xo.html
Hi there
I have a raptor 700r 2006 and have a issue with it .the like previously had a 12t front and 38t back sprocket although I changed the front sprocket to a 15t .the bike was running good although I experienced a problem with the bike loosing rev at high speed so I adjusted the tps sensor and the bike came right although when the bike had its previous 12 and 38 set up the speed topped out at around the high 30s around 130.
Now with a bigger front sprocket I'd expect to have more speed although now the bike stops at around 114km/h .I've removed the clutch sensor to bypass the top speed limiter although the bike still stops at around 114.The bike has a set of 22s in the back
Just to refresh the problem
When I had 12t and 38t sprockets and a 21inch tire the quad topped out at 130 above
When I added a 15t front sprocket and 22inch tires the bike tops out at 114
The only thing I did in between was set the tps sensor back to specifications of 0.68 as it was on 0.77 and with full throttle around 4.10
Any ideas why my top end is so low
There’s no way you’re doing 130mph, you probably meant kph
@@steffdagreat7 yes 130 km/h
maybe the gearing is too high for aero, do a full tuck and see if that improoves
@@austingready7429 well I just crashed the bike the other day .....so I'm looking for a frame 🙆♂️🧏♂️🙈
Does anyone know if this works on a 660 2002
Yes it does I tried it on my 01 660 and it seemed to work
My ktm250xcw tops out at 87mph
What is the point of doing this ????
Dustin Towsend it makes it faster
I have a msd box on mine that dose the same right ???
@@dustintowsend9302 no