ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Vivaro Trafic Primastar Gearbox Problem Fix

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 มี.ค. 2018
  • Vivaro Trafic Primastar Gearbox Problem Fix. Having problems selecting gears specially when cold? 1st and 2nd not easy to select until the van has warmed up? WD40 Silicone spray is ideal for this available on Amazon amzn.to/2YpNj4T

ความคิดเห็น • 83

  • @simontopspreadplastering5209
    @simontopspreadplastering5209 3 ปีที่แล้ว +5

    I was about to start pulling my linkage cables off.. I thought I’d have a little look on the Tube, and I came across this video... unbelievable it only bloody worked.. you are a hero!!!

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว

      Have a great Christmas and smooth gear changes for the New Year 👍

  • @stuartdodds.property
    @stuartdodds.property ปีที่แล้ว +2

    Tried this on my Vivaro today .. worked an absolute treat my gearbox feels like it's brand new

  • @simonchapman6552
    @simonchapman6552 6 ปีที่แล้ว +7

    My 08 Viv has just done this, was very stiff, followed your advice and BOOM....worked a treat mate, thank you sooooooo much. 👌👍🏻

    • @fiveminuteman
      @fiveminuteman  6 ปีที่แล้ว

      Simon Chapman no worries 👍

    • @remyd1984
      @remyd1984 4 ปีที่แล้ว

      Has the problem re-occurred??? Cheers

    • @pontesmocho3140
      @pontesmocho3140 4 ปีที่แล้ว

      @@fiveminuteman hi I have a movano 2.5 2008, and my gears pop up all them, and a gearbox make lot of noise when is in gear..

    • @crpth1
      @crpth1 4 ปีที่แล้ว

      @@remyd1984 - This "problem" will always re-occur! NOTICE that,the so called problem, is simply dirt and debris. Well combined with lack of lubrication!
      So when it dry out and more dirt and debris accumulate it will amplify the "problem".
      So keep it clean and lubed. For this last part use silicone grease or spray. It has the advantage of not "grabbing" dirt. Normal oils and grease are truly magnets for dirt/dust.
      This happens in a bunch of vehicles to different degrees! For what it's worth, always keep the lower engine bay cover in place. It avoid a bunch of road "stuff", get into the engine bay. ;-)

  • @binflynn1
    @binflynn1 3 ปีที่แล้ว +1

    Have to say a big thank you I found by spraying to the left of gearbox leave overnight worked a great cheers 😁👍👍👍👍

  • @kinaxixe
    @kinaxixe 4 ปีที่แล้ว +2

    5 minute Man, you're more like 5 minute miracle. I've sprayed W40 onto my Trafic gear box linkages and it only took 5mins for it to start sliding them gears like it should. Thank you for your video. Keep up the good work.

    • @fiveminuteman
      @fiveminuteman  4 ปีที่แล้ว

      Fantastic👍 I tend to give mine a spray when doing oil changes.

  • @kimbo53898
    @kimbo53898 5 ปีที่แล้ว +3

    Just did mine mate- brilliant- like a new gearbox!

  • @user-kq5qp6dh8l
    @user-kq5qp6dh8l 6 ปีที่แล้ว +7

    Thx 5 m8nute man..guess what!
    I took your advice and WD40ED the linkages on the gear box and the the connecter under the gear stick and I'M GETTING ALL GEARS SMOOTH AS OIL....EVEN REVERSE WORKS NOW...THX FOR THAT....TOOK 5 MINUTES.

    • @fiveminuteman
      @fiveminuteman  6 ปีที่แล้ว +1

      moonbase one fantastic, glad it helped ☺

  • @szkapi9
    @szkapi9 4 ปีที่แล้ว +1

    Its working!!! big thanks for video.

  • @LawnRight
    @LawnRight 3 ปีที่แล้ว +3

    This actually worked on my stiff gear changing. Sprayed wd40, changed to a different gear, sprayed again and In reverse, sprayed again.... 10 minutes later silky smooth gear changes.. thank you

    • @TheCountryCottageGardener
      @TheCountryCottageGardener 3 ปีที่แล้ว +1

      It's a small TH-cam world isn't it 😳😳🤣😜

    • @LawnRight
      @LawnRight 3 ปีที่แล้ว

      @@TheCountryCottageGardener drop me a message if you struggle mate. I did it in the dark with torch on phone and an oversized can of wd40. I shoved it all down there, sprayed, left it 10 mins then tried wiggling. Popped it into various gears, sprayed some more. Touch wood it's been ok since ,that's about 4 to 8 weeks back. My vivaro sits still now all week and only gets used at weekends

    • @TheCountryCottageGardener
      @TheCountryCottageGardener 3 ปีที่แล้ว +1

      @@LawnRight thanks pal I've just been watching loads vivaro videos just encase lol am so rock and roll 🤣

  • @carldycer
    @carldycer 6 หลายเดือนก่อน +1

    Brilliant. Your little vid gave me the information I needed. Great work. 👊🏼

    • @fiveminuteman
      @fiveminuteman  6 หลายเดือนก่อน

      No worries👍👍

  • @ourfrugallife
    @ourfrugallife ปีที่แล้ว +1

    Did mine yesterday with lithium grease. Worked a treat. Was thinking the gearbox had given up.

  • @crpth1
    @crpth1 3 ปีที่แล้ว +7

    BTW This is valid for pretty much ANY vehicle with similar configuration. ;-)
    In fact whenever any mechanical parts need to move together. Keep them clean and lubricated, it's a must. Be it a door hinge in your house, or a gearbox in your car/van!
    TIP: Make sure to keep your engine bay lower cover tray, in good condition and keep it in PLACE!
    Removal of the under tray is probably one of the most stupid things vehicle owners tend to do!
    It simply protect a huge plethora of components, from mechanical to electronic!
    When manufacturers that are counting every cent. Pay to add parts to a vehicle, It's rather stupid for the user to remove it. While completely clueless of what is doing! It's that simple!

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว +1

      Top tip for the lower engine cover. You only have to take it off and see what's exposed to understand the importance.

    • @simontopspreadplastering5209
      @simontopspreadplastering5209 3 ปีที่แล้ว

      Couldn’t agree more..

  • @Krafty
    @Krafty 2 ปีที่แล้ว +1

    Gonna try this on my Vivaro tomorrow, having frequent trouble in first, second and reverse.

  • @surindermann1394
    @surindermann1394 4 ปีที่แล้ว +2

    I sprayed wd40 as you showed and it works thanks

    • @remyd1984
      @remyd1984 4 ปีที่แล้ว

      Who long didn’t take to loosen? Cheers

  • @KAWoTReplays
    @KAWoTReplays 3 ปีที่แล้ว +1

    Thanks for this video, really helpfull :)

  • @barrynbreen
    @barrynbreen 3 ปีที่แล้ว +2

    I was just gettting ready drop into mechanic and liek otherwise got new gearbox but i wen tout with wd40 and after 2 hours.,....BINGO !!! it worked. what a legend. Please ntoe theres another with these if gear stick stops working completely, theres another youtueb video on it.

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว

      👍another gearbox transplant avoided 💰💰💰💰💰💰💰👍😎

  • @Rax2155
    @Rax2155 10 หลายเดือนก่อน

    Definitely doing this to my traffic later, its so hard getting into gear 😫 also having transmission fluid chamged and new filter to see it it helps my problmes with power loss

    • @fiveminuteman
      @fiveminuteman  10 หลายเดือนก่อน

      Power loss normally related to egr being clogged up so might be worth checking it out. Check intercooler pipes for cracks or splits as well, you would get a load of black snoke if they are split.

  • @kevinobrien8530
    @kevinobrien8530 3 ปีที่แล้ว +1

    Was worried I'd a major problem with the gearbox, as I had the exact same problem. Came across this video & gave it a try & guess what, it actually worked. Thank you so much. Any quick fix for water dripping on to the injectors?

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว +1

      Thanks! You need to seal the plastic panel scuttle that's at the bottom of the windscreen.

    • @richardburridge5301
      @richardburridge5301 3 ปีที่แล้ว +2

      It's metal plate under the plastic one you need to seal. Did mine this morning. Don't forget to unblock the drain pipes either side too.

  • @surindermann1394
    @surindermann1394 4 ปีที่แล้ว +1

    It’s working

  • @adamglenister4426
    @adamglenister4426 3 ปีที่แล้ว +1

    Are they in the same place for the new shape trafic?

  • @garethparry6673
    @garethparry6673 ปีที่แล้ว +1

    Might try this on my clio 👋👍

  • @antman5474
    @antman5474 5 ปีที่แล้ว +4

    the gearbox issues are a manufacturing fault, the bearings were over torqued in the factory. rebuilt boxes with the correct shims fitted last a long long time.

  • @ClankyRochet
    @ClankyRochet 3 ปีที่แล้ว +1

    I notice that mine didn’t improve much after WD-40 and some grease. Problem seem to be coming from the shifter itself. So, gave that a good lube and seem it has improved.

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว

      Good idea to lube the shifter as well.

  • @AngryPostmanStockholm
    @AngryPostmanStockholm 3 ปีที่แล้ว

    WD40 worked for me too to some extent (dont hurt to have a lil dish on the linkages under the stick incar).
    But as it can be kinda lubricating its more a water and moist remover i heard and therefore maybe better
    to use real grease as it lubricates that fat naturally and make water stuck like on a goose.

  • @spoonz1065
    @spoonz1065 4 ปีที่แล้ว +3

    Wd is water dispersing fluid . It's for cleaning more than lubrication. Use wd and then after an hour use a lube oil like 3 in 1 spray. Wont evaporate then .

  • @cellwood2296
    @cellwood2296 5 ปีที่แล้ว +2

    I have just changed driveshafts on Renault Master II and noticed the bearing holder bracket is off centre by 5mm putting stress on the gearbox shaft. Has anyone else noticed this?

  • @Ra-zor
    @Ra-zor 6 ปีที่แล้ว +4

    try using silicon based/moly based spray grease, wont wash away then...

  • @gabrielvonengelberg2496
    @gabrielvonengelberg2496 4 ปีที่แล้ว +1

    Renault Koleos have somebody the same problem? I need some tips,have most problem when is cold in 1 and 2 gear after warm is do hus job pretty nice. So what is the problem?😎

  • @rickythehoole2866
    @rickythehoole2866 5 ปีที่แล้ว +1

    My 2016 traffic done 11,000 gearbox gone! Thankful for warranty

    • @fiveminuteman
      @fiveminuteman  5 ปีที่แล้ว

      Wow. Is that the 1.6 diesel? Do you know what went wrong within the gearbox.

  • @fiveminuteman
    @fiveminuteman  6 ปีที่แล้ว

    Hello everyone, if you found this video useful then please subscribe to my channel so you don't miss future videos. Many thanks kind viewers 😉

  • @user-kq5qp6dh8l
    @user-kq5qp6dh8l 6 ปีที่แล้ว +2

    Soon ad it's warmed up the 123456 gears go in a but still stiff.
    Reverse won't go in.
    If I need reverse I turn ignition off put it in reverse dip clutch start engine then I hv reverse

  • @wadescleaningservicesltd
    @wadescleaningservicesltd ปีที่แล้ว +1

    We’ve just had ago at this and now the engine won’t start. Any suggestions? Many thanks

    • @fiveminuteman
      @fiveminuteman  ปีที่แล้ว

      That's weird as it's just the gear cable. Check you havent knocked any wires/plugs loose.

  • @user-kq5qp6dh8l
    @user-kq5qp6dh8l 6 ปีที่แล้ว +3

    Cables are connected on the ball and sockets but the gear linkage ball and socket to the right ad u look down into engine bay looks worn. Looks a bit slack

    • @remyd1984
      @remyd1984 4 ปีที่แล้ว +1

      1234567 1234567 what the fix?? Cheers

    • @chris77777777ify
      @chris77777777ify 6 หลายเดือนก่อน

      Spraying petroleum based lube around plastic/rubber gear leakage ball joints is a remedy for premature worn out ball joints.
      Not a bad idea spraying them, but better off applying silicon lube such as TRW brake grease

  • @Larryloafer488
    @Larryloafer488 6 ปีที่แล้ว +1

    Hi, you mentioned you changed the gear Box oil, what mileage did you do it at? Thanks.

    • @fiveminuteman
      @fiveminuteman  6 ปีที่แล้ว +1

      Michael B sorry I missed this comment, so I changed it at 141k. I wanted to make sure the correct spec was in as didn't have any history.im not sure the gearbox is the original either.

    • @Larryloafer488
      @Larryloafer488 6 ปีที่แล้ว

      5 Minute Man Cheers fella.

  • @josephjackson5330
    @josephjackson5330 2 ปีที่แล้ว +1

    I do this but be cearfull as wd40 stretches & rots rubber seals , sleeves.

  • @lewissimo
    @lewissimo 3 ปีที่แล้ว

    Is yours a petrol, it looks completely different from mine?

  • @user-kq5qp6dh8l
    @user-kq5qp6dh8l 6 ปีที่แล้ว +2

    Mine are all stiff...can't get reverse

    • @simonchapman6552
      @simonchapman6552 6 ปีที่แล้ว +1

      Mine did the same, was very stiff, this method just worked a treat. Well chuffed.

  • @sam.s1420
    @sam.s1420 5 ปีที่แล้ว +1

    Hello buddy
    Need you advise please
    Im going into a new courier carrier & i'm looking at buying a 2012- 2015 Renault master. Seen a lot of positive videos on you tube but read quite a few negative comments from old customers. Main issues are gearbox failing, and other problems.
    Whats your personal profession al advise please on those models.
    Thanks alot mate

    • @fiveminuteman
      @fiveminuteman  5 ปีที่แล้ว +1

      Im just a diy mechanic so cant give a pro answer. I believe from everything i read that there are problems with gearboxes going, injectors (water leak from scuttle seizing them in) and a few cases of wiring loom problems. You have to put it in context though as there are tons of these vans on the road so the chances of problems are increased then people post on forums their issues. VW, Mercedes and the others all have their problems. I bought my 2006 with 130k on it and now its at 150k ish. Ive serviced it and tidied up. Nothing gone wrong in the 2 years i had it. I would advise getting one closer to 2015 thats just come out of lease to BT, BG or the like that has been looked after.

    • @sam.s1420
      @sam.s1420 5 ปีที่แล้ว +1

      @@fiveminuteman thanks a lot for your response mate, yeah for sure its the previous owner that makes or brakes the life of them. Here in Sydney Australia there are tons of Renault master around, very popular

    • @fiveminuteman
      @fiveminuteman  5 ปีที่แล้ว +1

      @@sam.s1420 i understand Toyota Hiaces are popular in Australia, but from what i understand they need modernising and are a bit rough? I sent to see one here in the UK and it was a newer shape one. Opened the bonnet and surprised to see the radiator fan permanently running via a fan belt. It rattled a bit as well. Hyundai vans look interesting but not many in the UK. Mostly Trafic, Vivaro, Masters, Merc Sprinters, Fiat Ducato and VW T5/6's.

    • @sam.s1420
      @sam.s1420 5 ปีที่แล้ว +1

      @@fiveminuteman yeah Toyota hiace are killing it here, people buy 2 even, lol. But its 1 tonne van with limited income as a delivery courier. I need 2 tonner. Im sorter leaning towards VW crafter LWB, twin turbo 👌🏽. Still quite impressed with the R/master.

  • @Davidl91
    @Davidl91 3 ปีที่แล้ว +1

    cables may have stretched

    • @fiveminuteman
      @fiveminuteman  3 ปีที่แล้ว

      No problems since i lubed it.

  • @zeddytd
    @zeddytd 6 ปีที่แล้ว

    overfilling these gearboxes is not good, some parts of gearbox are lubricated by splashing the oil up from other gears, if there is too much oil in box this cant happen effectivly and some parts are starved of oil causing premature failure

    • @fiveminuteman
      @fiveminuteman  6 ปีที่แล้ว +2

      From what I've read people who have over filled get more mileage out of the PK6 gearbox due to gear being lubricated properly. Time will tell.

  • @thinwelshman1
    @thinwelshman1 6 ปีที่แล้ว +1

    Just crap Dura cables

  • @mechanick1000
    @mechanick1000 2 ปีที่แล้ว

    cant hear you ???

    • @fiveminuteman
      @fiveminuteman  2 ปีที่แล้ว

      Turn your volume up or pump up the jam