Many thanks. I had only one key and broken lock cylinder. The remote stopped working suddenly and there was no way to get around. Your procedure worked.
I’ve got exactly the same problem but sadly I can’t fix it .🙈. My hazard lights start to flash when the ignition is switched on . They continue to flash when the engine is running for around five minutes . Keys have new batteries but remote still won’t operate even after trying all procedures listed on TH-cam .
@@bigfarma6757 yes i’m like 90% sure once keys are programmed you’ll be fine. The hazards flashing is the alarm kicking in which is because the car cant detect the key. Once it can read the key you’ll be sorted
Thank you so much! My audi key fob battery died so we have to change it without knowing the programing would get erased doing so, my dad and i were working on it it for days without a clue to do we eventually searched but our key only works for the ignition and not the door so we couldn't do the step on the door since it wont turn when i saw your video on to just remove the lock and put in a screw driver it clicked to me on what to do and we immediately did it and it worked many thanks.
Hey mate when you found out what pin activated the central locking what did you do, its a bit unclear? Did you get a spare bit of wire and give that pin earth?
Hello. Can I re-progamme my remote key if I put my valet key in the ignition? I only have 1 FOB key and 1 Valet key. Many thanks in advance for any help! JP
AlienMonkeyDXB hi mate sorry for late reply i’m on holiday atm so wifi is bit of an issue. Yes you should be able to because you only need the second key to activate the programming mode from the door. I used a screwdriver so cant see why a key wont. Hope it helps 😊
hi maybe you can give me some tips or tell me what I'm doing wrong? I have the same problem as in the video and can't sort it out, what are the last 2 steps? Should I put the key in the ignition and? I also noticed that when I open the door on the driver's side, the passenger side door remains closed. When I close on the driver's side, both doors close. I also noticed that the locking button works in the middle, but the unlocking does not work anymore. Is the central locking damaged? How to check are they functional? Thank you for any advice
Lukasz T by the sounds of it your issue is more to do with the whole central locking system. It’ll be better to get a diagnostic done to see if that picks it up. The locks vw systems can be temperamental like this
Hi mate, on my MK 1 TT roadster 03 plate my remote fob doesnt work at all, with having just the one key fob, but when i insert the key opening the door manually it opens and locks with the immobilizer on / off. however in order to gain access through the drivers door the immobilzer both hazards activate by inserting the key in the ignition barrel it de-activates it - My question is where do i start the programming process and what method would you suggest to get it back to default- am newbie on the Audi TT Mk1 so any help would be greatly appreciated.. Cheers in advance👍🏻
Vj Star sounds like the exact problem i had its common. Follow what i’ve done in the vid and that should recode the fob to the car. Feel free to ask anything else. Good luck
Thank fucking God you exsist. I bought some bs key replacement from eBay. I transferred everything over even the transponder. For some reason my key stopped working.
Hi Sorry to bother you with as this as old video and you're likely not to reply now but I have this exact same issue on a 1999 TT and I am struggling to fix it even with this method. Can you please remember in what sequence you did this? Lock/unlock etc...??? Any help would be greatly appreciate.. Thank you
Hi i dont think i actually did anything in any particular order I just did the lock/unlock then press the button. You might have an issue with your central locking?
Does this work with programming a brand new fob?
@@quinny318 i havent done it for a while but i believe it was pretty much the same if i recall correctly
Many thanks. I had only one key and broken lock cylinder. The remote stopped working suddenly and there was no way to get around. Your procedure worked.
skasu123 glad it helped i can remember how annoying it was for me so only fair to share! Hope it stays good now 😊
Thanks very much for this video. Worked perfectly on my 2000 Audi TT 180 Quattro
No probs buddy glad it helped
I’ve got exactly the same problem but sadly I can’t fix it .🙈. My hazard lights start to flash when the ignition is switched on . They continue to flash when the engine is running for around five minutes . Keys have new batteries but remote still won’t operate even after trying all procedures listed on TH-cam .
You must have another issue I assume then maybe with your central locking or maybe a weak battery?
@@TKhouseofcars Thanks . I’m hoping that once the keys are programmed then the hazard light issue, everytime I start the car, might go away .
@@bigfarma6757 yes i’m like 90% sure once keys are programmed you’ll be fine. The hazards flashing is the alarm kicking in which is because the car cant detect the key. Once it can read the key you’ll be sorted
@@TKhouseofcars That’s fantastic ! I’ll keep my fingers crossed 🤞😊
@@bigfarma6757 let us know how it goes
Thank you so much! My audi key fob battery died so we have to change it without knowing the programing would get erased doing so, my dad and i were working on it it for days without a clue to do we eventually searched but our key only works for the ignition and not the door so we couldn't do the step on the door since it wont turn when i saw your video on to just remove the lock and put in a screw driver it clicked to me on what to do and we immediately did it and it worked many thanks.
Glad to know i'm not making these vids for no reason :) Thanks for watching
Wow it worked for me holy shoot I’m happy as heck thank you so much for making a video
No probs glad it helped 🙂
Hey mate when you found out what pin activated the central locking what did you do, its a bit unclear? Did you get a spare bit of wire and give that pin earth?
Hi pal yes it was just an earth point. The circuit tester was grounded to the chassis thats all.
Hello. Can I re-progamme my remote key if I put my valet key in the ignition? I only have 1 FOB key and 1 Valet key.
Many thanks in advance for any help! JP
AlienMonkeyDXB hi mate sorry for late reply i’m on holiday atm so wifi is bit of an issue. Yes you should be able to because you only need the second key to activate the programming mode from the door. I used a screwdriver so cant see why a key wont. Hope it helps 😊
hi maybe you can give me some tips or tell me what I'm doing wrong? I have the same problem as in the video and can't sort it out, what are the last 2 steps? Should I put the key in the ignition and? I also noticed that when I open the door on the driver's side, the passenger side door remains closed. When I close on the driver's side, both doors close. I also noticed that the locking button works in the middle, but the unlocking does not work anymore. Is the central locking damaged? How to check are they functional? Thank you for any advice
Lukasz T by the sounds of it your issue is more to do with the whole central locking system. It’ll be better to get a diagnostic done to see if that picks it up. The locks vw systems can be temperamental like this
Hi mate, on my MK 1 TT roadster 03 plate my remote fob doesnt work at all, with having just the one key fob, but when i insert the key opening the door manually it opens and locks with the immobilizer on / off. however in order to gain access through the drivers door the immobilzer both hazards activate by inserting the key in the ignition barrel it de-activates it - My question is where do i start the programming process and what method would you suggest to get it back to default- am newbie on the Audi TT Mk1 so any help would be greatly appreciated..
Cheers in advance👍🏻
Vj Star sounds like the exact problem i had its common. Follow what i’ve done in the vid and that should recode the fob to the car. Feel free to ask anything else. Good luck
Channel Tee thank you mate👌il give it a shot at some point this weekend, and il let you know how iv got on👍🏻
Vj Star thanks pal gimme a shout if you need help
Channel Tee will do buddy👌🏻👍🏻
Thank fucking God you exsist. I bought some bs key replacement from eBay. I transferred everything over even the transponder. For some reason my key stopped working.
Can’t hear it
Hi
Sorry to bother you with as this as old video and you're likely not to reply now but I have this exact same issue on a 1999 TT and I am struggling to fix it even with this method.
Can you please remember in what sequence you did this? Lock/unlock etc...???
Any help would be greatly appreciate.. Thank you
Hi i dont think i actually did anything in any particular order I just did the lock/unlock then press the button. You might have an issue with your central locking?
@@TKhouseofcars hi
Central locking was fine, sorted now. Thank you
Fz Bt glad its sorted pal
How did u sorted?
@@lukaszt1840 got the same key/fob recoded-programmed