Really apprechiate your work... currently working on maxing out my 2.4 in speed.... but then my plan is absolutely a bit special toolchanger(if budget is left LOL)
Would this system work with a 300mm Voron Trident. I am thinking of hanging the tools off the top rail in the front and flipping the gantry over so the y linear rails are on the top to increase the height of the gantry.
Not really, the gantry needs to move about 10 mm vertically vs the dock. Trident cannot do that without installing a separate dock lift, which sucks IMO. There is a trident friendly version coming, sometime Q1 likely, too much other work right now.
Awesome work!!
Could you give us Detail of the can wiring with all Jumpers set and so on ? Would be nice :)
very nice work. finished building my v2 and the plan is to go tapchanger soon
Really apprechiate your work... currently working on maxing out my 2.4 in speed.... but then my plan is absolutely a bit special toolchanger(if budget is left LOL)
Amazing! Love it! What are the benefits of dragon burner over (mini)stealthburner?
should provide better part cooling and extruder compatibility
I think its lighter to
Love it! Hope you make a step by step tutorial how to make it run from skratch one day :)
Definitely! But, I need to get a reasonable phone stand printed first. This is a horrible wobbly AliExpress thing that is an absolute pain to use.
Great! will it also work with the StealthBurner ?
Would this system work with a 300mm Voron Trident. I am thinking of hanging the tools off the top rail in the front and flipping the gantry over so the y linear rails are on the top to increase the height of the gantry.
Not really, the gantry needs to move about 10 mm vertically vs the dock. Trident cannot do that without installing a separate dock lift, which sucks IMO.
There is a trident friendly version coming, sometime Q1 likely, too much other work right now.
Is there anything you can advise me that would let me get a start on rebuilding my Trident?
Looks like you need a bit more squish 1:00
Lol, maybe. It's V0 and the bed flexes, so it's either some undersquash or elephants foot. I could probably try running the first layer hotter.