Just want to add my advice on this. Just after you snap in those two buttons to the new back plate of the controller, don't worry that your buttons aren't making that satisfying "click" feel just yet. That will specifically happen after you screw in the little micro board on top. I remember panicking just after fastening those buttons as they weren't clicking and I immediately wondered where I went wrong. Turns out I was jumping the gun a little!
Was so afraid to take apart my controller but your guide made this a cakewalk! Only took me an hour! Controller back button kit works like a charm. Thank You!
Great news 😁 I think you hold the record for the fastest time so far, normally takes people double that time. If you done it again you might even half you're time 👍
For anyone having issues remapping and getting the quick red flash when you hold the back button for 5 seconds, double check 9:22 on the video and make sure you are putting the connector over the top of the clear plastic piece! I made the mistake of putting it behind and then covering with the plastic piece. Completely fixed my remapping issue and is working perfectly now!
I have to ask, do the back buttons have any sort of cheating stuff? I really want to use it on COD and Fortnite but I’m scared I’m gonna get banned because I don’t know if there are any cheating services in the control board. (Sorry if my English is bad but it isn’t my native language)
The only time you'd get your account banned is if your on PC and use wallhacks or something. Being on console the only thing people can use is a Cronus
I had issues with getting the controller to work and messaged Craig about it. He took the time to guide me through steps to get it up and running and I can’t be more thankful and happy about the result! Thanks again
It was the L1/L2 ribbon cable as far as I can remember, that's 99% of the time the problem when people can't get their pad to work. If you check the L1/L2 ribbon, just see if it's in the right way as it's so easy to put it in wrong
Just put the put wire back in that come with the original controller kept the right side in and it’s all working fine you just don’t need to fit the L1 L2 ribbon
Always great news to hear when somebody's kit install went smoothly, few people these past days have had issues not putting the ribbons in, but second or third try they've done it 😁 hope you have fun with the kit 👍
Thanks for the kind words, glad I've explained everything well. I'm always going in depth on my videos, you want to watch one of my car videos on the channel, I never shut up and literally explain everything 😄
Wow, what a wonderfully done installation guide! I really enjoy ed and subbed though i haven't received mine yet... Cant wait to rewatch and follow along. 😅 Keep up the awesome work! 💙
You are the best man, I tried 2 other videos before I found yours and was getting frustrated and nervous about ruining my controller and now I got one that’s fully operational!
You should have came here sooner 😄 awesome news to hear you've got it all working. I've not uploaded any videos on controller mods for a while... since I made this one they've added a new version BDM-030, I've been trying to find one but no luck yet
You're a legend Nigel, I think you're possibly the oldest to fit the kit. Great news to hear you managed it all, I've had a few people this past week struggling
Took almost 2 hours but i did it on the first try, thank you so much man your guide was really helpful, at first it wouldn't work so i restarted my ps5 and it worked thanks so much
If you ever did it again for say a friend or yourself I bet you'd do it in half that time know you know how it all goes together and stuff. Lately people have been putting the ribbon cable the wrong way around, that's been the only issue, but glad yours worked with just a restart 😁
You're more than welcome, thanks for watching my video. To be honest I think you've got the record for the fastest install if you've managed 30mins, I don't think anybodys done it that fast, I remember once somebody said it took them 3 hours!
Thanks very much Craig. There's a 99% chance if I had followed any other guide, I'd just be sitting with an expensive paperweight after 1 hour! Your advice on what to look out for as you go along makes a huge difference. Liked and subbed, my friend.
I'm sure you'd have been fine no matter which video you watched. People watch these videos and think they're harder than they look, but the main thing is giving it a go. Luckily out of all the views I've had there's only been a few people who've needed a little extra help, which I've managed to fix so all good. Thanks for the kind words David appreciate it 😁
@@CraigsChannel Ah yes, I noticed someone from the comments had mentioned your 1-to-1 after-help comms which made their year! I think it was after I read that one, I knew I had lucked upon someone hugely decent and was worth giving a go. I'm from the build-it-yourself hardware era of childhoods (you know, pc's and so on) - sounds like you are too. It's been countless years since I was hands on, even with something on the simpler end of the spectrum. So, as I'm sure you can see from all the comments, it was massively satisfying to tear something apart and re-build it in your image (without trying to sound biblical, LOL). And the best part is not spending 4x the price on a SCUF! So thanks buddy! ❤️.
I'm always helping people, I really enjoy helping people out if they get stuck. Yup I've always taken stuff apart and put it back together. I took my Dyson hoover one Saturday apart just to clean when I was bored 😄 Scuf controllers are good, but they break really quick and you only get 6 months, plus like you say super expensive. You doing any more mods on your controller?
@@CraigsChannel Sorry for the late response buddy. You sound like an actual selfless person. Good on you. It's a rare trait in a person 👌🏽. I would love to mod this controller further if I'm honest. Pimping it up like pimp my ride would be fun!
I've always enjoyed helping people out, guess it's just how I am 😁 Well the two mods I always recommend is the back buttons and digital triggers, I'd only recommend the triggers if you only play FPS games or have another controller for say racing games. I get asked all the time if I prefer the 2 button or 4, 4 just seems to many buttons to me, I've tried but can't get used to them... this kit you've got with the 2 is perfect got 99% of people
@@RECKYPOOO yeah the Touch pad does work perfectly fine. Only thing is i cant remap the touch pad button to the back buttons because i didnt want to solder…
Cheers mate, great instructions, first time I went through it wouldnt turn on, so I checked the battery which seemed to be connected fine. I took out all the new cables and stuff and plugged in the original ps5 ones and it worked. So I re followed the instructions and then it worked with the new paddles, guessing it was a loose connection. User error though, instructions were great! If it had worked first time it would have been like 45 minutes but it took me nearly 1hr 15 as I had to do it a second time.
1hr 15mins is still good going, I remember once somebody said it took them 5hrs lol. Lately people have been putting the ribbons cables in the wrong way, like you say just an error but easily fixed
comments from someone who just completed this mod following this tutorial: 23 minute video took me about an hour to complete all said and done The box came with a youtube link to an "installation video" printed on it, that video "no longer exists" There are ribbon cables for the L3/R3 remapping that Craig skipped, and a small wire included (no idea what its for) They gave me WAY more screws than are called for, I'm not sure what they are all for (i have nearly 20 unused screws) If you have gigantic Shrek hands like me, use the prying tool to help maneuver and seat the ribbon cables back in to the boards, also the tweezers were invaluable when trying to reinsert the four controller screws and a headlamp was nice to have if you're not in a well lit room. 10/10, liked and subscribed
An hour is good going. I agree they give you far to many screws 😄 but they're just replacements for the 4 you opened the pad with, always nice to have spares in case you mess the head up on a screw or somehow lose one. The little wire you mentioned is for the track pad, if you want to remap one of the back buttons to the track pad you solder that wire, why anybody would want to even remap that is beyond me. As for a well lit room mine isn't, I've got a lamp but still doesn't give me enough light. I'm super glad you got everything installed and hope you have fun with the kit 😁
Your clearly aren't awful at it 😎 clearly a skilled man 👍 One hour is really good going for your first time, I remember reading one comment and somebody said it took them 5 hours 🙈 If you play CoD or FPS games you should also check my digital triggers videos out, they go perfect with the back button kit
You said an awesome mom 😎 hopefully you didn't find the install to hard! I'm sure he'll want other mods for the controller what I've got on my channel, just depends what game he plays
@@CraigsChannel I took me a minute and had to keep pausing to make sure I did it correctly! But the video was amazing and the controller is working great! Thank you
I think people watch the video for the first time and think 😳 "no way am I attempting that!". But after you've taken it apart you're probably thinking that wasn't so hard after all! Plus you seem a clever woman, I had a quick look at your videos some of them homes are beautiful, we ain't got nothing like that here in the UK 😄
I was a lil worried bout getting this, not tech savvy at all 💀 but my guy you are a fuxking lifesaver, there is no way i could have done this watching the video extreme recommends but you are that guy! Thanks brotha, you are the goat
😄 thanks man, appreciate the kind words. The only downfall with Extremerates videos is they don't speak, they used to ask me to do their videos, but haven't for a while! I'd of been happy to just do some commentary over them fitting the kit
Thanks alot man! Great tutorial. Just followed it to a T and it's working perfectly. Now I'm ready to wreck these kids in Modern Warfare 2 and Warzone 2.0 !!
@@CraigsChannel Niiiccee that's cool. I got a win on day 2 that the game released in quads. What mode did you get your win in? Solo, duos, trios or quads?
Was a Trio squad, there wasn't a trio option so we just clicked on don't fill. I've been grinding for the mastery camo, been working my way through each section like AR, BR, Smg etc
@@CraigsChannel nice niiicee! I've gotten a few guns gold. Gonna work on getting a few more then that'll probably be it for camo grind for me. Don't have time to get orion, platinum and all that lol
This video won't be any good to you. You'll need the BDM-030 video, I've done the commentary on Extremerates TH-cam channel if you check it out, this videos only for the BDM-010 and 020
ur a legend mate thank you so much. ive been looking for a new controller but sites like scuff sell them for a fortune so im definately doing this instead. such a great and clear video
Thanks man, I've had a few people say it took them 1hr 30 - 2hrs, I'm sure you had fun and time flew 😁 if you ever need to fit a kit for a friend I bet you would half that time
I was having a HUGE problem that I could not locate, it wouldn't turn on. Flash yellow, sometimes work only when pulled apart... My advice, pay attention to the way the slips go into the latches! It has to be the correct side up!!! Specifically the one on the left side! Make sure to copy what side is up and match with video
So i think im having issues. Around 9:22. i tried placing the golden thing into the back part of the controller but its too small to place into both parts.
@@CraigsChannel thanks a lot. It wouldn't have been if not for this video. When I opened the package I said "OMG I just threw 60 bucks on the garbage" Thanks again ☺️
Doing these kits DIY is a hell of a lot cheaper than buying one already done, some company's charge £200-250 depending on what mods you want, plus now you have a little knowledge of the inside in case anything ever breaks, you can fix it yourself 😎
@@CraigsChannel exactly 👍🏻👍🏻 Why would someone pay 200$ for a Dualsense Edge when there is a much cheaper way. And as you said, I got an idea how to do it next time if I want to change the controller.
Tbh it's not a hard install, I think people watch it and think NOPE 😄 You're one of the brave ones who went for it and did it with ease 😎 More than welcome for the video, thanks for watching it
Loads of people think it's going to be super hard and they won't even attempt it, I keep saying have faith in yourself. You're one of the good ones who did it with ease 😁
@@kelniEYL If you go on Amazon it'll tell you in the title 010 and 020, as long as its the newer back button kit with the grips, the older back button kit is for 010
I've been staying away from this stuff because of soldering, not that I don't know how to but I just ain't bothered to do that but this.. this is exactly what I was looking for thank you so much
Out of all the people who watch my videos 99.9% don't want to do the soldering, and tbh you only need to do it IF you want to have R3/L3 as your back button. Personally I do no soldering as I only use X and O for the back
@@CraigsChannel yeah, I don't see that really being a big problem considering you can map your controls anyway so if it's a must to have say, crouch that's bound to R3 then bind it elsewhere
Exactly, my mate just wouldn't change his button layout so I had to do the soldering. Mind the soldering on this is super easy compared to other pads, the Xbox Series controller is the worst for fitting the back button kit, you need so solder about 25 points, maybe even more it's a horrible idea and certainly wouldn't recommend it to people who've never soldered. Everybody's been saying this wish Sony would bring a back button kit out like they did for the PS4
@@CraigsChannel I just got this one in the mail today and other than feeling like my hands might be a little big for it I live how flush the buttons are. Works flawlessly.
Thanks man appreciate it, guessing you got this kit with the 2 paddles? Theyve brought the 4 button kit out since I made this video, but I feel 4 is to many buttons, I only really need to for CoD
Thank you so much for the awesome tutorial!!! Just installed these exact ones on my controller and they work perfectly!!! Earned another subscriber 🙏🏼🙏🏼🙏🏼
Good video but the letter isn’t how to tell the BDM. At least not anymore. Scan the WR code and what ever the second digit is (1,2,3,4,5) is the BDM. (10,20,30,40,50). I ordered this kit but have to return it now because I have the A on my back board but turns out it’s BDM 30.
Yeah it's changed now, still not site why they've made 5 different versions! Extremerate have a link on their website so you can tell which version you have, you just plug your controller into the USB cable via you're PC, but scanning the QR code is probably the fastest
@robertbennett7845 the only positive of them bringing new versions out is the BDM-030 and above are all easier to install, you don't have to mess with the ribbon cables on the left and right. Did you see their new kit they've come out with what let's you have digital triggers or normal by sliding the slider? Pretty cool
@@CraigsChannel I got the textured back with black metal buttons I just have to wait for it to come in! Seems the regular grip in this video is out of stock right now in black. All good though!
@@WhyTom I had the textured before the newer grip. The smooth touch one isn't good for people with sweaty hands, I've seen a few people say they wished they bought the textured kind. I'm sure you'll be more than happy 😁
I found one of these in mint condition at one of those Amazon return centers. Gonna try it on a drifting controller I have and worst case scenario I'm not out much. Thanks for the guide!
I've made a few on the back buttons kits and the digital triggers. Since this one they've released the RISE4 which has 4 back buttons, but to be honest 2 is enough for me
@@CraigsChannel yes I feel like two back buttons is enough for me too. I don't think I can get used to 4 buttons. My brain can't register that many lol
Thanks for the kind words 😁 Some people see the video and they're like NOPE, thinking it'll be to hard. I've had some people get stuck, but I've managed to help them out and get it all working. Once you've done it once, you'll be like a professional the next time you do one
@@CraigsChannel it looks hard but as u explained evrything so well it's hard to make mistake ...I'm happy with this little project let's call it like that ...and it's all about learning and how people send their knowledge...in this case u nailed it
Since I made this video they brought out the 4 back button kit, I've got it installed but to be honest I'm only using two buttons still, 4 is just to many 😄 People ask all the time should I get 2 or 4, I just say what ever you think will work best! Is it FPS games you're playing or a mixture? If its FPS a good little upgrade is digital triggers I've a couple of videos on them, just means you have like a mouse click when you press L2 and R2
@@CraigsChannel well 2 buttons works for me ...most of the time games use X and O for jump and crouch ...and whoever people ask I think 2 buttons is good .. I had nacon before and again I use just 2 buttons ...and those triggers I have to look into it 4 sure ...I'll check your video tonight
@@CraigsChannel so far so good, they feel more comfortable to use than the xbox elite paddles. Happy out, really would have struggled without your guide. So thank you again. Videos like these are much appreciated.
I've had many kinds words over the hundreds of thousands of views on my controller mods, but a few bad ones people saying they've broken their controller and the kit is dog shit and doesn't work 😄 I've helped probably 99% of people resolve their issue but a few just won't listen and say the kit is crap 🙈 Good to hear you're one who did it all yourself and managed. I've got buttons on my Xbox pad I fitted myself, I've not used the Elite pad before, the paddles looked like long ones. Is there 4 on that pad or just 2?
@@CraigsChannel haha, not everybody's cut out for the sort of rooting that's involved. I just took my time with everything and just paused and started the video as I went along🤷♂️the elite xbox controllers are really good. Except for there dodgey deadzones. But I turn my deadzones up in games not down😂😂helps to not over shoot and makes aim assist feel "stickier" on higher deadzones. The main thing I don't like is the width of the xbox controller. Too narrow as opposed to the ps5 controller which is wider feeling. The paddles on the elite are 100% too tho. I only used 2 rather than 4 but never had a problem. How's the reliability on the rise 2.0? Any reliability issues or still going strong?
Yeah I guess you're right some people just aren't cut out to install small kits! Some random video popped up last night of some dude trying to fix stick drift by replacing one of his analogue sticks, he ended up pretty much melting the board because he used a heat gun 😄 I felt so sorry for him. The 2 button kit is still going strong, my v1 paddles did snap, but replaced under the 12 months warranty and since then they've upgraded to v3 paddles which are much stronger. I've also got the RISE4 but never use more than 2 paddles, my hands just aren't big enough to use 4 paddles. I only really need X and O for CoD
Awesome video! Just followed it step by step and now I have brand spanking new back buttons on my dualsense 👍🏻 my son even got me to get him one with some of his Xmas money too.
The fpc cable connecting to the motherboard was to short… like the two little piles that you had to put it on, it was to short and didn’t reach the other pole.
Thanks man, seems loads people have been ordering these the past couple of weeks as they've started to become more and more popular, not sure if you seen the 4 button kit? I added a video on that the other night
@@elthekid I wished you'd asked first which to install first 😄 I always say to people install the triggers, make sure they work, then install the paddles, so if you put them together separately and it doesn't work you can pin point if it's a paddle or trigger problem
I have one more question, is it possible to have triggers remap buttons and led working on one controller? Been watching your next vid but the led uses the same connector as the remap buttons right?
Always good to hear somebody else local on the channel haha. Did you see they've released the 4 back button kit now? Ive uploaded that video a few days ago
Thanks man, appreciate it. They've changed the models since I did this one so just make sure you've got the right one ad there's a BDM-010 020 030 and 040 now
Thanks for the tutorial, was really clear and I managed to fit a kit on yesterday., only issue I have is the button you mention at 20:44, I can't fit that on properly (when I do put that button and back piece on I'm unable to press the button) - any tips?
Is it the small remap button? Are you putting it the right way? You could maybe sand it down a little if there's plastic in the way or just remove it totally
Really wasnt too hard , just time consuming. Nervous when i first started , heck i even ripped a flex cable while taking one out with the tweezers😅. Still got it done tho and works!😂 Thanks for this product man!
Yeah the soldering is only needed IF you want say L3 or R3 as a back button. It works regardless on the main buttons. I just use L3 and zr3 normally and X O as back buttons
I've only got tiny hands anyways and find it really comfortable, never had anybody say it's made a difference tbh. The metal buttons will be heavier, but I much prefer the plastic. If you play CoD I'd also recommend the tactile clicky triggers. Another thing double check which version pad you have, as since this video they've released a BDM-030
Claw! Holy shit you must be some kind of skilled ninja, I tried claw once and my wrist hurt for like 3 days 😄 I only play Rebirt and Shipment, kind of fell out of love with CoD
Hi! I’m realizing now that I might have a different version of the BDM-020. The piece you connected at 9:20 does not fit on my model of controller. guess i’ll hope to reassemble the controller correctly until I know if I need a different model remap kit.
Hello, I don’t know if it’s too late to ask questions but . I followed this tutorial to the teeth & everything worked perfect & smooth but I couldn’t get past the ps5 menu. It would load up the game but not respond to any buttons except when I went back to ps5 menu. Then when I finally got passed that I realized all buttons work perfectly even back paddles except for L2 😢 😢any suggestions???
Never to late to ask questions 👍 Did you exit remap mode? You press the back button in the middle to enter it, set your K1, K2 etc, then hold it again to exit
Another thing worth knowing. I have the V1 but I'm sure it'll be the same with this version. The attachment does alter the feeling of the haptic feedback. I tried it on Ratchet and Clank. The attachment itself vibrates altering the feel. I keep this controller for COD and other controllers for story games.
I only really play CoD, I actually fitted digital triggers to my pad and turned the haptic feedback off, now when I press L2 and R2 its like a mouse click, really good for CoD
@@CraigsChannelYou're right, better turn off all these things when playing online. I've set my aim and shoot buttons to L1 and R1. If I hadn't already installed version 1, I would definitely get this, the clicky triggers sound really cool.
I've tried L1 and R1 in the past but can't reach the back buttons at the same time, so it's something I can't use. With the digital triggers though they feel really good on CoD, it's crazy how fast you can shoot a pistol
Just take your time, my videos on these kits have had probably 150k views in total and only issues were people not pressing stuff in properly or using the wrong kit on the wrong pad, as there are two versions. With you ordering now you'll more than likely get the kit compatible with both pads 👍
@@CraigsChannel Got mine today and was able to make everything work great on the first try by following this video. Thanks a lot! Only downside is that a few days after they shipped this one they release the “4 buttons” in the back one for almost the same price. Still will enjoy this one and get use to it.
If I'm honest the 2 buttons is more than enough, I've been struggling to get to grips with 4 buttons but it's hard work, 2 took me a few weeks to get to grips with so I'll keep trying with 4, but have a funny feeling I'll just stick with 2
@@CraigsChannel Between the 2 on the back and the “button remaping” in the PS Accessibility Settings I’m playing Horizon Zero Dawn great. X on the K1 and the O on the K2 so I can evade and jump without moving my thumb from the RS plus I change Square and R3 on Accessibility so I can Slide/Crouch with R3 like in Ghost of Tsushima and Toggle the Focus with Square.
4! You'll be catching up to me soon 😄 in fact you'll probably be able to fit kits without my videos. Glad you've managed though, few people have had issues lately putting ribbon cables in the wrong way
Oh really? Mine only snapped the one time, I had the original v1 paddles, then got the v3 in replacement. My friends are still on the v1 so waiting on there's to snap and I'll fit the v3, but if they don't snap they'll probably upgrade to the 4 button kit, I've just done a video on last night
This man deserves a medal for how thorough he was
Just want to add my advice on this. Just after you snap in those two buttons to the new back plate of the controller, don't worry that your buttons aren't making that satisfying "click" feel just yet. That will specifically happen after you screw in the little micro board on top.
I remember panicking just after fastening those buttons as they weren't clicking and I immediately wondered where I went wrong. Turns out I was jumping the gun a little!
legend
Was so afraid to take apart my controller but your guide made this a cakewalk! Only took me an hour! Controller back button kit works like a charm. Thank You!
Great news 😁 I think you hold the record for the fastest time so far, normally takes people double that time. If you done it again you might even half you're time 👍
For anyone having issues remapping and getting the quick red flash when you hold the back button for 5 seconds, double check 9:22 on the video and make sure you are putting the connector over the top of the clear plastic piece! I made the mistake of putting it behind and then covering with the plastic piece. Completely fixed my remapping issue and is working perfectly now!
I have to ask, do the back buttons have any sort of cheating stuff? I really want to use it on COD and Fortnite but I’m scared I’m gonna get banned because I don’t know if there are any cheating services in the control board. (Sorry if my English is bad but it isn’t my native language)
No no cheats, Sony actually sell controllers with back buttons and companys like Scuf
@@CraigsChannel alr thx. Ive had my accounts for over 6 years now and I really don’t wanna lose them so thank you for telling me🙏🏻
The only time you'd get your account banned is if your on PC and use wallhacks or something. Being on console the only thing people can use is a Cronus
I had issues with getting the controller to work and messaged Craig about it. He took the time to guide me through steps to get it up and running and I can’t be more thankful and happy about the result! Thanks again
My controller isn’t turning on and I double checked the battery what was ur issue??
It was the L1/L2 ribbon cable as far as I can remember, that's 99% of the time the problem when people can't get their pad to work.
If you check the L1/L2 ribbon, just see if it's in the right way as it's so easy to put it in wrong
@@CraigsChannel yeah that what I’m having trouble with now I can use L1 L2
Can’t use L1 L2
Just put the put wire back in that come with the original controller kept the right side in and it’s all working fine you just don’t need to fit the L1 L2 ribbon
You gave the most CLEAR tutorial out there on TH-cam! I’ve followed your steps and it works like a charm. Thank you so much!
Always great news to hear when somebody's kit install went smoothly, few people these past days have had issues not putting the ribbons in, but second or third try they've done it 😁 hope you have fun with the kit 👍
What a clean, straight to the point and informative tutorial video. Well done 👏
Thanks man, always nice to hear kind words from somebody.
I've actually just dropped the 4 button kit video last night 😁
Mine doesn’t work in game but works in menu how do I fix
Holy crap this was very very helpful video. The way he explained everything was on point great video my guy. You just saved the PS community.
Thanks for the kind words, glad I've explained everything well. I'm always going in depth on my videos, you want to watch one of my car videos on the channel, I never shut up and literally explain everything 😄
Wow, what a wonderfully done installation guide! I really enjoy ed and subbed though i haven't received mine yet... Cant wait to rewatch and follow along. 😅 Keep up the awesome work! 💙
Thanks man 😎 I turned notifications off for subs so I never know who's subbed as long as I'm helping people that's all good to me 😁
You are the best man, I tried 2 other videos before I found yours and was getting frustrated and nervous about ruining my controller and now I got one that’s fully operational!
You should have came here sooner 😄 awesome news to hear you've got it all working. I've not uploaded any videos on controller mods for a while... since I made this one they've added a new version BDM-030, I've been trying to find one but no luck yet
As a 62yr old had no problem in connecting the ribbons and it works😜 thanks for the vid 👍💫
You're a legend Nigel, I think you're possibly the oldest to fit the kit. Great news to hear you managed it all, I've had a few people this past week struggling
Took almost 2 hours but i did it on the first try, thank you so much man your guide was really helpful, at first it wouldn't work so i restarted my ps5 and it worked thanks so much
If you ever did it again for say a friend or yourself I bet you'd do it in half that time know you know how it all goes together and stuff.
Lately people have been putting the ribbon cable the wrong way around, that's been the only issue, but glad yours worked with just a restart 😁
Fair play, really easy to follow instruction guide and you cover everything needed. Awesome work.
Thanks man, always hear to hear kind words 😁
just got the eXtremerate RISE 2.0 and installed it withen 30mins thanks to this video, thank you for such a straight forward easy installation craig!!
You're more than welcome, thanks for watching my video. To be honest I think you've got the record for the fastest install if you've managed 30mins, I don't think anybodys done it that fast, I remember once somebody said it took them 3 hours!
@@CraigsChannel I’ve took apart these controllers before and put them together for repairs so that was a big help
Ah well that's the answer right there then, you're already a semi pro 😄 glad the install was easy for you, always nice to know I'm helping
Never comment on videos but this vid actually made me buy this and fit it using this video as a guide. Absolute legend
Appreciate you commenting if you never do 😁 glad it's helped you out and hope you enjoy the kit
Thanks very much Craig. There's a 99% chance if I had followed any other guide, I'd just be sitting with an expensive paperweight after 1 hour! Your advice on what to look out for as you go along makes a huge difference. Liked and subbed, my friend.
I'm sure you'd have been fine no matter which video you watched. People watch these videos and think they're harder than they look, but the main thing is giving it a go.
Luckily out of all the views I've had there's only been a few people who've needed a little extra help, which I've managed to fix so all good.
Thanks for the kind words David appreciate it 😁
@@CraigsChannel Ah yes, I noticed someone from the comments had mentioned your 1-to-1 after-help comms which made their year! I think it was after I read that one, I knew I had lucked upon someone hugely decent and was worth giving a go.
I'm from the build-it-yourself hardware era of childhoods (you know, pc's and so on) - sounds like you are too. It's been countless years since I was hands on, even with something on the simpler end of the spectrum. So, as I'm sure you can see from all the comments, it was massively satisfying to tear something apart and re-build it in your image (without trying to sound biblical, LOL). And the best part is not spending 4x the price on a SCUF! So thanks buddy! ❤️.
I'm always helping people, I really enjoy helping people out if they get stuck.
Yup I've always taken stuff apart and put it back together. I took my Dyson hoover one Saturday apart just to clean when I was bored 😄
Scuf controllers are good, but they break really quick and you only get 6 months, plus like you say super expensive.
You doing any more mods on your controller?
@@CraigsChannel Sorry for the late response buddy. You sound like an actual selfless person. Good on you. It's a rare trait in a person 👌🏽. I would love to mod this controller further if I'm honest. Pimping it up like pimp my ride would be fun!
I've always enjoyed helping people out, guess it's just how I am 😁
Well the two mods I always recommend is the back buttons and digital triggers, I'd only recommend the triggers if you only play FPS games or have another controller for say racing games.
I get asked all the time if I prefer the 2 button or 4, 4 just seems to many buttons to me, I've tried but can't get used to them... this kit you've got with the 2 is perfect got 99% of people
THANK YOU! I already commented under your video guide for both Controller models and you did an awsome job on this kit!
Does your touch pad still work
@@RECKYPOOO yeah the Touch pad does work perfectly fine. Only thing is i cant remap the touch pad button to the back buttons because i didnt want to solder…
Thanks Matteo hope you enjoy the kit 😁
Cheers mate, great instructions, first time I went through it wouldnt turn on, so I checked the battery which seemed to be connected fine. I took out all the new cables and stuff and plugged in the original ps5 ones and it worked. So I re followed the instructions and then it worked with the new paddles, guessing it was a loose connection. User error though, instructions were great! If it had worked first time it would have been like 45 minutes but it took me nearly 1hr 15 as I had to do it a second time.
1hr 15mins is still good going, I remember once somebody said it took them 5hrs lol.
Lately people have been putting the ribbons cables in the wrong way, like you say just an error but easily fixed
I can’t express this enough, thank you
More than welcome thanks for watching 😎
Installed this for a friend and it worked perfectly. Thanks for the tutorial.
Thanks for watching Leo. Have you not got a PlayStation yourself?
This guide is the absolute best! Followed step by step and got it done without a single problem! :D
Always good to hear that 😁 people lately have been putting the ribbon cables the wrong way around and thought they broke their pad
Now that is how you do a tutorial video. Well done. Much appreciated!
Thank you so much! I just finished mine with this video and it works perfectly
Nice 😎 are you doing any more mods like digital triggers or just sticking with the back buttons?
@@CraigsChannel just the back buttons! Also I have a question is there a on and off option for these?
@@k9ushi847 No the only thing you can do is either buy a spare pad or keep your hands off the paddles 😄
comments from someone who just completed this mod following this tutorial:
23 minute video took me about an hour to complete all said and done
The box came with a youtube link to an "installation video" printed on it, that video "no longer exists"
There are ribbon cables for the L3/R3 remapping that Craig skipped, and a small wire included (no idea what its for)
They gave me WAY more screws than are called for, I'm not sure what they are all for (i have nearly 20 unused screws)
If you have gigantic Shrek hands like me, use the prying tool to help maneuver and seat the ribbon cables back in to the boards, also the tweezers were invaluable when trying to reinsert the four controller screws
and a headlamp was nice to have if you're not in a well lit room.
10/10, liked and subscribed
An hour is good going.
I agree they give you far to many screws 😄 but they're just replacements for the 4 you opened the pad with, always nice to have spares in case you mess the head up on a screw or somehow lose one.
The little wire you mentioned is for the track pad, if you want to remap one of the back buttons to the track pad you solder that wire, why anybody would want to even remap that is beyond me.
As for a well lit room mine isn't, I've got a lamp but still doesn't give me enough light.
I'm super glad you got everything installed and hope you have fun with the kit 😁
I'm awful at this type of stuff. but i got it done in under an hour with this guide. Thank you so much. I thought this was going to be impossible.
Your clearly aren't awful at it 😎 clearly a skilled man 👍
One hour is really good going for your first time, I remember reading one comment and somebody said it took them 5 hours 🙈
If you play CoD or FPS games you should also check my digital triggers videos out, they go perfect with the back button kit
@@CraigsChannel It was my first time trying something like this so definitely not amazing. I'lldefinitely check out your video!
I'm rating you a 10/10 my friend, you did it in good time and got it all working 👍
I've plenty others, ever get stuck or need advice I'm always here
this was incredibly helpful, I was so scared to do anything once it was open 😆 but you got me through it. Thanks
Loads of people say that 😄 I'm glad you're one of the ones who put confidence in yourself and managed to do it, some people just won't even try it 😫
This was a great tutorial! I’m not an techie person at all but my son was begging me to put these on for him!
You said an awesome mom 😎 hopefully you didn't find the install to hard! I'm sure he'll want other mods for the controller what I've got on my channel, just depends what game he plays
@@CraigsChannel I took me a minute and had to keep pausing to make sure I did it correctly! But the video was amazing and the controller is working great! Thank you
I think people watch the video for the first time and think 😳 "no way am I attempting that!". But after you've taken it apart you're probably thinking that wasn't so hard after all!
Plus you seem a clever woman, I had a quick look at your videos some of them homes are beautiful, we ain't got nothing like that here in the UK 😄
@@CraigsChannel no it was intimidating though! But it wasn’t too bad after it was all said and done
Best ExTreme Installation Video on TH-cam Thanks for sharing
More than welcome 😁 thanks for watching
I was a lil worried bout getting this, not tech savvy at all 💀 but my guy you are a fuxking lifesaver, there is no way i could have done this watching the video extreme recommends but you are that guy! Thanks brotha, you are the goat
😄 thanks man, appreciate the kind words. The only downfall with Extremerates videos is they don't speak, they used to ask me to do their videos, but haven't for a while! I'd of been happy to just do some commentary over them fitting the kit
Thanks alot man! Great tutorial. Just followed it to a T and it's working perfectly. Now I'm ready to wreck these kids in Modern Warfare 2 and Warzone 2.0 !!
😄😄 that's what I like to hear!
WZ 2 is stupid at the moment, the TTK is insane, I've only had a couple of games managed to win 1
@@CraigsChannel Niiiccee that's cool. I got a win on day 2 that the game released in quads. What mode did you get your win in? Solo, duos, trios or quads?
Was a Trio squad, there wasn't a trio option so we just clicked on don't fill.
I've been grinding for the mastery camo, been working my way through each section like AR, BR, Smg etc
@@CraigsChannel nice niiicee! I've gotten a few guns gold. Gonna work on getting a few more then that'll probably be it for camo grind for me. Don't have time to get orion, platinum and all that lol
I've only just got a ps5 but this is a must, quality vid
This video won't be any good to you. You'll need the BDM-030 video, I've done the commentary on Extremerates TH-cam channel if you check it out, this videos only for the BDM-010 and 020
ur a legend mate thank you so much. ive been looking for a new controller but sites like scuff sell them for a fortune so im definately doing this instead. such a great and clear video
Just make sure you check which version controller you have, since I made this video they've brought a BDM-030 out 👍
I've been holding off on doing this to my controller but this video helped a ton and was very easy to follow, thank you!
How come you held off? Was it a worry in case something broke? Glad you bit the bullet and did the install 😁
@@CraigsChannel I never modded a controller before and was worried I’d brick it ha
Nah you'd never do that, there isn't much to really go wrong. Once you've done it once you think to yourself "that wasn't so hard" 😄
Awesome video! I got it done in 2hrs max, but i got the job done. You just earned yourself a subscriber.
Thanks man, I've had a few people say it took them 1hr 30 - 2hrs, I'm sure you had fun and time flew 😁 if you ever need to fit a kit for a friend I bet you would half that time
Can’t wait to get my new setup and start my journey with new map buttons
Hope you have fun with the kit 😎
I was having a HUGE problem that I could not locate, it wouldn't turn on. Flash yellow, sometimes work only when pulled apart... My advice, pay attention to the way the slips go into the latches! It has to be the correct side up!!! Specifically the one on the left side! Make sure to copy what side is up and match with video
Few people have had this problem, I've told them it's usually the L1/L2 ribbon.
They've released a new controller version BDM-030
So i think im having issues. Around 9:22. i tried placing the golden thing into the back part of the controller but its too small to place into both parts.
man that was so easy with that video thank you, did it in 45 min
That's really good time if it's the first time you've done anything like this. Nice to hear when people do it with ease and fast 😁
Thanks for this video. It was very instructional. I did it in 2 hours! but mission accomplished successfully 😂
Congratulations on the mission 😄 glad it was successful for you dude 😁 always nice to hear when people's managed to do it all
@@CraigsChannel thanks a lot. It wouldn't have been if not for this video. When I opened the package I said "OMG I just threw 60 bucks on the garbage" Thanks again ☺️
Doing these kits DIY is a hell of a lot cheaper than buying one already done, some company's charge £200-250 depending on what mods you want, plus now you have a little knowledge of the inside in case anything ever breaks, you can fix it yourself 😎
@@CraigsChannel exactly 👍🏻👍🏻 Why would someone pay 200$ for a Dualsense Edge when there is a much cheaper way. And as you said, I got an idea how to do it next time if I want to change the controller.
I was doing so well. Followed up the steps until I realized my package didn’t come with the little metal bars that attach the back buttons 😢
Did you message extremerate? Or send it back to Amazon or where you bought the kit from?
Mate can't thank you enough for this video, i'm no good with this kind of stuff and you made it soo easy and simple. Thank you!
Tbh it's not a hard install, I think people watch it and think NOPE 😄
You're one of the brave ones who went for it and did it with ease 😎
More than welcome for the video, thanks for watching it
@@CraigsChannel hey I have mine all together and it works but I can’t get it to remap
@@CraigsChannellike it lights up and when you try to remap it blinks but doesn’t actually work
@@conway6269 have you exited remap mode?
Fantastic video... got it up and running in 40mins 🥂
That's probably record time! I've had a few people say it's taken them 5 hours 😳😄
Dammn just did mines bro..Thanks alot!! It was easier than I thought
Loads of people think it's going to be super hard and they won't even attempt it, I keep saying have faith in yourself. You're one of the good ones who did it with ease 😁
The best video for bdm-020 🔥 New Subscriber👍
Thanks man, always nice to hear when somebodys had a good experience from fitting the kit 😁
this kit works on BDM 020? seller tell me that is not work,only for 010 :/
@@kelniEYL If you go on Amazon it'll tell you in the title 010 and 020, as long as its the newer back button kit with the grips, the older back button kit is for 010
@@CraigsChannel thanks
dude, bonkers installation guide, just so good!! thank for this, really helped me mate!
More than welcome 👍 next install for you, digital triggers? 😄
Great video really informative and the accent makes it 10 times better
Thanks man, most people don't even know my accent I've been called Irish and Scottish a good few times 😄
Absolute legend…thanks for the help!!
More than welcome, install any mod mods in the future I'm always here 👍
Great tutorial, step by step with no filler 👍🏼
Thanks man, glad it helped you out and wasn't to difficult 😁
This video is amazing it work for me job well done my friend
Thanks for watching and awesome news hearing you got it all installed 😎
I've been staying away from this stuff because of soldering, not that I don't know how to but I just ain't bothered to do that but this.. this is exactly what I was looking for thank you so much
Out of all the people who watch my videos 99.9% don't want to do the soldering, and tbh you only need to do it IF you want to have R3/L3 as your back button. Personally I do no soldering as I only use X and O for the back
@@CraigsChannel yeah, I don't see that really being a big problem considering you can map your controls anyway so if it's a must to have say, crouch that's bound to R3 then bind it elsewhere
Exactly, my mate just wouldn't change his button layout so I had to do the soldering. Mind the soldering on this is super easy compared to other pads, the Xbox Series controller is the worst for fitting the back button kit, you need so solder about 25 points, maybe even more it's a horrible idea and certainly wouldn't recommend it to people who've never soldered. Everybody's been saying this wish Sony would bring a back button kit out like they did for the PS4
@@CraigsChannel I just got this one in the mail today and other than feeling like my hands might be a little big for it I live how flush the buttons are. Works flawlessly.
Great little kit done in the time it took to watch the video you explained everything perfectly thanks.
That's probably a record then, it usually takes people at least an hour, you've done well. Hope you enjoy the kit 😎
Got my paddles today this was the best video and easiest instructions to follow . Just earned you a subscriber and like 👍🏼Thanks
Thanks man appreciate it, guessing you got this kit with the 2 paddles? Theyve brought the 4 button kit out since I made this video, but I feel 4 is to many buttons, I only really need to for CoD
Thank you so much for the awesome tutorial!!! Just installed these exact ones on my controller and they work perfectly!!! Earned another subscriber 🙏🏼🙏🏼🙏🏼
Thanks man, helps towards that 20k milestone I've been aiming for 😁
Couldn't of explained it any better
Thank man, appreciate it when I get positive comments 😁
Good video but the letter isn’t how to tell the BDM. At least not anymore. Scan the WR code and what ever the second digit is (1,2,3,4,5) is the BDM. (10,20,30,40,50). I ordered this kit but have to return it now because I have the A on my back board but turns out it’s BDM 30.
Yeah it's changed now, still not site why they've made 5 different versions!
Extremerate have a link on their website so you can tell which version you have, you just plug your controller into the USB cable via you're PC, but scanning the QR code is probably the fastest
@ yeah I figured that out. lol
@robertbennett7845 the only positive of them bringing new versions out is the BDM-030 and above are all easier to install, you don't have to mess with the ribbon cables on the left and right.
Did you see their new kit they've come out with what let's you have digital triggers or normal by sliding the slider? Pretty cool
@@CraigsChannel nice! Cant wait to get it hooked up.
Please make an installation video for installing hall hall effect triggers on a PS5 Controller THAT WOULD BE LEGENDARY THANK YOU!
I've got two videos up of digital triggers, the clicky and clicky tactile
I accidentally broken the ribbon at 6:31. I am wondering what is called so I can find replacement online.
I wouldn't worry it's just for the rear microphone, if you have a headset which I'm sure you do you'll be using the mic on that 👍
@ thanks for the information. Very detail video guide
Lovely guide, concise yet human!
Thanks for the kind words 😁
@@CraigsChannel after watching your vid, got a set of the metal back buttons. Had them working in about 45 minutes! Cheers!
Quite a few people even having issues this week, no idea what's going on, maybe something in the weather 😄 awesome to hear yours is working all good
That was very helpful! Thank you!
Always glad I can help people out. Thanks for stopping by
Can’t wait to come back when my stuff comes in thank you!
Is something out of stock you've tried to buy? Or you waiting on delivery of something?
@@CraigsChannel I got the textured back with black metal buttons I just have to wait for it to come in! Seems the regular grip in this video is out of stock right now in black. All good though!
@@WhyTom I had the textured before the newer grip. The smooth touch one isn't good for people with sweaty hands, I've seen a few people say they wished they bought the textured kind. I'm sure you'll be more than happy 😁
@@CraigsChannel good to know thank you 🙂
Hey man thank you so much for this wonderful video you deserve 100000000 like cheers buddy
Thanks David appreciate the kind words. They've brought out a couple of other kits since this one
I found one of these in mint condition at one of those Amazon return centers. Gonna try it on a drifting controller I have and worst case scenario I'm not out much. Thanks for the guide!
Thank you Craig. This was very helpful.
More than welcome 👍 not sure if you seen the latest video I did, but they've just released the 4 back button kit now
Very clean and easy to follow along video. I was on the fence but since you made this video i went ahead and pulled the trigger
I've made a few on the back buttons kits and the digital triggers. Since this one they've released the RISE4 which has 4 back buttons, but to be honest 2 is enough for me
@@CraigsChannel yes I feel like two back buttons is enough for me too. I don't think I can get used to 4 buttons. My brain can't register that many lol
@@CraigsChannel just finished my install. Thank you!!!!
man just to say thank you tutorial is amazing step by step ...literally u cant make mistake ...well done
Thanks for the kind words 😁
Some people see the video and they're like NOPE, thinking it'll be to hard. I've had some people get stuck, but I've managed to help them out and get it all working. Once you've done it once, you'll be like a professional the next time you do one
@@CraigsChannel it looks hard but as u explained evrything so well it's hard to make mistake ...I'm happy with this little project let's call it like that ...and it's all about learning and how people send their knowledge...in this case u nailed it
Since I made this video they brought out the 4 back button kit, I've got it installed but to be honest I'm only using two buttons still, 4 is just to many 😄
People ask all the time should I get 2 or 4, I just say what ever you think will work best!
Is it FPS games you're playing or a mixture? If its FPS a good little upgrade is digital triggers I've a couple of videos on them, just means you have like a mouse click when you press L2 and R2
@@CraigsChannel well 2 buttons works for me ...most of the time games use X and O for jump and crouch ...and whoever people ask I think 2 buttons is good .. I had nacon before and again I use just 2 buttons ...and those triggers I have to look into it 4 sure ...I'll check your video tonight
You are a hero my friend, thank you very much
Glad I could help, thanks for watching 😎😁😎😁
Appreciate the guide. Just got mine setup watching this. Legend
Thanks for watching, appreciate that. Glad you got it all working, how you finding the buttons?
@@CraigsChannel so far so good, they feel more comfortable to use than the xbox elite paddles. Happy out, really would have struggled without your guide. So thank you again. Videos like these are much appreciated.
I've had many kinds words over the hundreds of thousands of views on my controller mods, but a few bad ones people saying they've broken their controller and the kit is dog shit and doesn't work 😄 I've helped probably 99% of people resolve their issue but a few just won't listen and say the kit is crap 🙈
Good to hear you're one who did it all yourself and managed.
I've got buttons on my Xbox pad I fitted myself, I've not used the Elite pad before, the paddles looked like long ones. Is there 4 on that pad or just 2?
@@CraigsChannel haha, not everybody's cut out for the sort of rooting that's involved. I just took my time with everything and just paused and started the video as I went along🤷♂️the elite xbox controllers are really good. Except for there dodgey deadzones. But I turn my deadzones up in games not down😂😂helps to not over shoot and makes aim assist feel "stickier" on higher deadzones. The main thing I don't like is the width of the xbox controller. Too narrow as opposed to the ps5 controller which is wider feeling. The paddles on the elite are 100% too tho. I only used 2 rather than 4 but never had a problem. How's the reliability on the rise 2.0? Any reliability issues or still going strong?
Yeah I guess you're right some people just aren't cut out to install small kits! Some random video popped up last night of some dude trying to fix stick drift by replacing one of his analogue sticks, he ended up pretty much melting the board because he used a heat gun 😄 I felt so sorry for him.
The 2 button kit is still going strong, my v1 paddles did snap, but replaced under the 12 months warranty and since then they've upgraded to v3 paddles which are much stronger. I've also got the RISE4 but never use more than 2 paddles, my hands just aren't big enough to use 4 paddles. I only really need X and O for CoD
Successful upgrade. Thankyou very much for the video.
Awesome video! Just followed it step by step and now I have brand spanking new back buttons on my dualsense 👍🏻 my son even got me to get him one with some of his Xmas money too.
Not sure if you've seen my latest video but they've just released the 4 button kit personally I think the 2 is more than enough though
I just did what you did and everything is working perfectly thank you 🔥🔥
Really good news 😁 seems people have had faulty ribbon cables this week and haven't worked, already great to hear when somebodys works first time 👍
Yeah I had to bail on another tutorial. Came to this one & what a life changer.
Excellent Video Man! Thank you!
Thanks for the kind words 😁
Easiest setup and well explained thank you.
More than welcome, thank you for picking my video to watch, there's a few out there now 😄
Great instructions!! It works perfectly! Thanks bro-ski!!
The fpc cable connecting to the motherboard was to short… like the two little piles that you had to put it on, it was to short and didn’t reach the other pole.
Great video i just did mine and works perfectly keep up the good work
Thanks man, seems loads people have been ordering these the past couple of weeks as they've started to become more and more popular, not sure if you seen the 4 button kit? I added a video on that the other night
This vid helped me a lot! Thankyou
You're more than welcome, thank you for watching it 😁
@@CraigsChannel wish I installed the clicky triggers before I did the buttons. Now I have to take everything apart again🤣
@@elthekid I wished you'd asked first which to install first 😄
I always say to people install the triggers, make sure they work, then install the paddles, so if you put them together separately and it doesn't work you can pin point if it's a paddle or trigger problem
Better Luck next time, I like the challenge haha
I have one more question, is it possible to have triggers remap buttons and led working on one controller? Been watching your next vid but the led uses the same connector as the remap buttons right?
Thank you sir!!! That went pretty smooth.
Always good to hear, a few people have had issues, but they've found out something wasn't plugged in and they've fixed it 😁
A fellow geordie, great tutorial. Gonna buy one and save this video to install
Always good to hear somebody else local on the channel haha.
Did you see they've released the 4 back button kit now? Ive uploaded that video a few days ago
Amazing job man. Super detailed 👏👏👏
Thanks dude appreciate the kind words 😁
Nice job on this video
Thanks man, I try my best on all my controller modding videos 😁
This video is just badass ! Thank you helped me a lot man .
Glad it helped you Larry, plenty other videos on the channel if you want to do some more modding 😎
I know I’m late, but you’re getting a sub from this one😂
Thanks man, appreciate it. They've changed the models since I did this one so just make sure you've got the right one ad there's a BDM-010 020 030 and 040 now
@@CraigsChannel ok man I will know
Thanks for the tutorial, was really clear and I managed to fit a kit on yesterday., only issue I have is the button you mention at 20:44, I can't fit that on properly (when I do put that button and back piece on I'm unable to press the button) - any tips?
Is it the small remap button? Are you putting it the right way? You could maybe sand it down a little if there's plastic in the way or just remove it totally
Really wasnt too hard , just time consuming. Nervous when i first started , heck i even ripped a flex cable while taking one out with the tweezers😅. Still got it done tho and works!😂 Thanks for this product man!
Great video thanks man 👍
Thanks for watching Cory 😎
Thanks bro jus got done with mines ur vid was very helpful u jus got urself a new Sub and again thank u and great content bro keep bending Sue over
Great video. Had no trouble at all.
Always nice to hear when somebody doesn't have an issues and it's a smooth install 😎
how do I fix my L1 and L2 triggers not working?
Craig, umm for the actual extremerate video it shows soldering, is that only if you want to remap R3 and L3 or the big touchpad
So if you dont solder can you just remap the circle,triangle,square, x and the d pad
Yeah the soldering is only needed IF you want say L3 or R3 as a back button. It works regardless on the main buttons. I just use L3 and zr3 normally and X O as back buttons
Thanks craig 😅
More than welcome. Just double check you get the right version kit as there's 4 different controllers now BDM-010, 020, 030 and 040
Hey craig I need your help. Before I buy this I play competitive cod and I was wondering it the back made it heavier? Or feel bigger in your hands
I've only got tiny hands anyways and find it really comfortable, never had anybody say it's made a difference tbh.
The metal buttons will be heavier, but I much prefer the plastic.
If you play CoD I'd also recommend the tactile clicky triggers.
Another thing double check which version pad you have, as since this video they've released a BDM-030
@@CraigsChannel thanks man I bought both the paddles and triggers. Came from playing claw
Claw! Holy shit you must be some kind of skilled ninja, I tried claw once and my wrist hurt for like 3 days 😄
I only play Rebirt and Shipment, kind of fell out of love with CoD
@@CraigsChannel hey craig I need your help. Ive bought the triggers but I cant tell if mines a bdm 30 or bdm 20
@@CraigsChannel im at that step where your taking those orange cables on the side. Mines r skinny blue cables
Hi! I’m realizing now that I might have a different version of the BDM-020. The piece you connected at 9:20 does not fit on my model of controller. guess i’ll hope to reassemble the controller correctly until I know if I need a different model remap kit.
You could possibly have a 030. Is the pad brand new
Craig, I installed everything and now my controller won’t even turn on any advise?
X2😢
hello craig, thanks for this video !
quick question, can you assign every button on k1 et k2 like L3,R3 and the 4 directions ? thanks !
all work i think, except you have to solder the L3 and R3 to make those work
As Manny said you'll need to solder if you want to use L3 or R3 as a back button, same with the trackpad
After this video and wanting paddles, i am ordering mine and following to install. Great tutorial!!!
Did you see I dropped a new video last night? They've finally released the 4 back button kit
Hello, I don’t know if it’s too late to ask questions but . I followed this tutorial to the teeth & everything worked perfect & smooth but I couldn’t get past the ps5 menu. It would load up the game but not respond to any buttons except when I went back to ps5 menu. Then when I finally got passed that I realized all buttons work perfectly even back paddles except for L2 😢 😢any suggestions???
Never to late to ask questions 👍
Did you exit remap mode? You press the back button in the middle to enter it, set your K1, K2 etc, then hold it again to exit
Another thing worth knowing.
I have the V1 but I'm sure it'll be the same with this version. The attachment does alter the feeling of the haptic feedback. I tried it on Ratchet and Clank. The attachment itself vibrates altering the feel. I keep this controller for COD and other controllers for story games.
I only really play CoD, I actually fitted digital triggers to my pad and turned the haptic feedback off, now when I press L2 and R2 its like a mouse click, really good for CoD
@@CraigsChannelYou're right, better turn off all these things when playing online. I've set my aim and shoot buttons to L1 and R1. If I hadn't already installed version 1, I would definitely get this, the clicky triggers sound really cool.
I've tried L1 and R1 in the past but can't reach the back buttons at the same time, so it's something I can't use. With the digital triggers though they feel really good on CoD, it's crazy how fast you can shoot a pistol
Just order mine, after seeing this video I decided to give it a go. Thanks, hope I don’t screw everything when I get it
Just take your time, my videos on these kits have had probably 150k views in total and only issues were people not pressing stuff in properly or using the wrong kit on the wrong pad, as there are two versions. With you ordering now you'll more than likely get the kit compatible with both pads 👍
@@CraigsChannel Got mine today and was able to make everything work great on the first try by following this video. Thanks a lot! Only downside is that a few days after they shipped this one they release the “4 buttons” in the back one for almost the same price. Still will enjoy this one and get use to it.
If I'm honest the 2 buttons is more than enough, I've been struggling to get to grips with 4 buttons but it's hard work, 2 took me a few weeks to get to grips with so I'll keep trying with 4, but have a funny feeling I'll just stick with 2
@@CraigsChannel Between the 2 on the back and the “button remaping” in the PS Accessibility Settings I’m playing Horizon Zero Dawn great. X on the K1 and the O on the K2 so I can evade and jump without moving my thumb from the RS plus I change Square and R3 on Accessibility so I can Slide/Crouch with R3 like in Ghost of Tsushima and Toggle the Focus with Square.
I've been meaning to play Ghost of Tsushima for a long time, I'm guessing you like it?
The new Horizon comes out next month or is it March?
perfect explanation!! thank you!!!
Thanks for watching
@@CraigsChannel i didn’t just watch. I have done 4 controllers already!!
4! You'll be catching up to me soon 😄 in fact you'll probably be able to fit kits without my videos. Glad you've managed though, few people have had issues lately putting ribbon cables in the wrong way
Glad they changed the paddles I can’t count the amount of times mine snapped and had to get replacements sent out.
Oh really? Mine only snapped the one time, I had the original v1 paddles, then got the v3 in replacement. My friends are still on the v1 so waiting on there's to snap and I'll fit the v3, but if they don't snap they'll probably upgrade to the 4 button kit, I've just done a video on last night