Hahah thank you Vickers for the support and feedback. Perfect timing for the black furry assistant to join us. lol I publish new videos weekly so be sure to subscribe for all the latest videos. Thanks again.
very interesting... not sure if it is possible, but it would be nice if we could replace the HDMI button with the NDI Source... and add more than one source, but 4 NDI sources... to replace the functions of the buttons.... many of us use NDI cameras only and that would be really nice.. or even better... NDI only switcher... 4 or 8 NDI source or interchangeable sources...
Would you tell me what exact PTZ camera are you using in this video? Another video on TH-cam says it works only with NDI/HX2 and I am going to clarify that.
Good video. 1. Did you connect the PTZ camera directly to the ethernet port of the Osee Stream Deck or you connected it to a router on which the PTZ camera was also connected? 2. How will you utilize the Osee Stream Deck ethernet port for internet to stream live when you have connected it direclty to the PTZ camera if you did so?
Hey there. No you have it mixed up. I have the GoStream Deck, the yellow network cable connected to router. And I also have the ndi ptz camera also connected to router. Both devices have a separate network cable connected to the router. Which automatically makes them operate on the same IP address. Really a plug and play setup.
In the GoStream Deck menu we can change the record quality settings from low, medium and high. Maybe in a future firmware update we might be able to record higher bitrate.
Hello Nice video. Is it possible to trick autoswitching. I play the drums and have not a producer. Hello Nice video. Is it possible to trick autoswitching. I play the drums and have no producer.
Have you been able to get NDI out of the zcam? Anytime I try it says my source needs to be 1920x1080 or less, yet I have zcam NDI configured for 1080p.
From my understanding my Z Cam E2 M4 doesn’t have this NDI feature. Maybe you can try setting your fps to 30fps or 60fps. Im not sure if this will help but you could try. Hummm what else could it be? Is the z cam showing up on the GoStream deck ndi list as an option to select? Is your z cam set to h264? Make sure it’s not set to h265 or ProRes use h265. And you said you have it set to 1080p. So it should be fine. I don’t think this will help but you can try setting your hdmi output setting on the z cam to auto or confirm the hdmi output setting is set to 1080p. I’m not really sure why the GoStream deck is not accepting the ndi signal. On the Osee website it says it supports “NDI|HX, H.264 codec, 480p/720p/1080p resolution, 25/29.97/30/50/59.94/60 frame rate.” Hope this info helps. Keep me updated.
@@LeoPazzo Ah, sorry for the confusion, I'm using ZCam Stream Converter to receive an NDI output. The option shows up in the GoStream but that's when it lists that error. I select Resolution of 1080P, 30FPS, Stream1, and output NDI with nodec n264.
![Let's Review the Osee GoStream Duet! [Product Review]](http://i.ytimg.com/vi/jPOYC1ilyPk/mqdefault.jpg)
![Let's Review the Osee GoStream Duet! [Product Review]](/img/tr.png)
Great presentation, very concise and clear. Loved that your black furry assistant got in on the action at 7:49.
Hahah thank you Vickers for the support and feedback. Perfect timing for the black furry assistant to join us. lol
I publish new videos weekly so be sure to subscribe for all the latest videos. Thanks again.
I’m very impressed by the outline of your presentation. Your preparedness comes through and it is very appreciated!
Much love for the support and feedback.
Thank you very much.
❤️🙏🎥💯
Stellar delivery and content. Bravo!
Thank you so much Ross.
That means a lot. 💯💪🎥
Lenny, great video. As always very informative.
Thank you very much. I really appreciate the support and feedback.
Nice & Thanks Sir :)
@@krishnansrinivasan830 much love man. Thank you so much for your support. 💪🎥❤️🔥
@@LeoPazzo Have a wonderful day Sir 🙏🕊
very interesting... not sure if it is possible, but it would be nice if we could replace the HDMI button with the NDI Source... and add more than one source, but 4 NDI sources... to replace the functions of the buttons.... many of us use NDI cameras only and that would be really nice.. or even better... NDI only switcher... 4 or 8 NDI source or interchangeable sources...
Yes that is actually a great idea. A full ndi video switcher.
So basically one could possibly have a 4 camera setup plus 1-4 ptz cameras over NDI. That would be one heck of a setup. Thank you for the update.
You got it. Very useful feature Osee added to this GoStream.
It just keeps getting better and better.
@@LeoPazzo I just ordered from Aliexpress
@@jeezaderon awesome
Your going to love it
Would you tell me what exact PTZ camera are you using in this video? Another video on TH-cam says it works only with NDI/HX2 and I am going to clarify that.
I’m using the Avkans E20 NDI camera which you can see at 0:36 section of the video.
@@LeoPazzo Thank you for your reply. The model does support NDI|HX, not NDI|HX2, correct?
Good video.
1. Did you connect the PTZ camera directly to the ethernet port of the Osee Stream Deck or you connected it to a router on which the PTZ camera was also connected?
2. How will you utilize the Osee Stream Deck ethernet port for internet to stream live when you have connected it direclty to the PTZ camera if you did so?
Hey there.
No you have it mixed up.
I have the GoStream Deck, the yellow network cable connected to router.
And I also have the ndi ptz camera also connected to router.
Both devices have a separate network cable connected to the router. Which automatically makes them operate on the same IP address. Really a plug and play setup.
@@LeoPazzo Alright. Well noted
@@ebentechstudiono problem. Your welcome. Let me know how it works for you.
Can the NDI receive alpha channel and be used in as a source in the DSK?
Awesome video! And I don’t say that lightly!
lol thank you very much, it means a lot. I'll keep working to improve my videos even more
Has the Osee been reliable for larger livestream events?
Still thinking if Atem are more reliable.
Hi. There is any way to record 1080p 60fps in a higher bitrate? GoStream usually record video by default only in 4500kbps....really low quality...so?
In the GoStream Deck menu we can change the record quality settings from low, medium and high.
Maybe in a future firmware update we might be able to record higher bitrate.
I’m using 3 OBSBOT Tail Air with NDI. Do you know if you can see all your NDI sources at the same time on the preview monitor?
I dont think you can, you would have to select each one that you want to view. one at a time.
Can you get audio,over that ndi from your pc?
Yes you can. It sends video and audio
nice bro
Thanks buddy. I appreciate the support.
Hello Nice video. Is it possible to trick autoswitching. I play the drums and have not a producer. Hello Nice video. Is it possible to trick autoswitching. I play the drums and have no producer.
What SD card would you recommend? Thanks
Hey there. If I recall correctly I am using the sandisk 64g 95mbs write speed.
@@LeoPazzo solid performance? Drop frames? Audio good?
Thanks! Thought I’d need something faster... in the box recommends > 150mb write...
I have the osee switcher all working ok except i cant get still into the stills 1 or 2 any help would be r
great thanks..mike
Did you figure it out yet?
If not let me know and I can try to help
Have you been able to get NDI out of the zcam? Anytime I try it says my source needs to be 1920x1080 or less, yet I have zcam NDI configured for 1080p.
Z Cam doesn’t have NDI.
What do you mean.
Maybe try explaining again.
Oh maybe you have the Z Cam E2N ?
From my understanding my Z Cam E2 M4 doesn’t have this NDI feature.
Maybe you can try setting your fps to 30fps or 60fps. Im not sure if this will help but you could try.
Hummm what else could it be?
Is the z cam showing up on the GoStream deck ndi list as an option to select?
Is your z cam set to h264? Make sure it’s not set to h265 or ProRes use h265.
And you said you have it set to 1080p.
So it should be fine.
I don’t think this will help but you can try setting your hdmi output setting on the z cam to auto or confirm the hdmi output setting is set to 1080p.
I’m not really sure why the GoStream deck is not accepting the ndi signal.
On the Osee website it says it supports “NDI|HX, H.264 codec, 480p/720p/1080p resolution, 25/29.97/30/50/59.94/60 frame rate.”
Hope this info helps.
Keep me updated.
@@LeoPazzo Ah, sorry for the confusion, I'm using ZCam Stream Converter to receive an NDI output. The option shows up in the GoStream but that's when it lists that error. I select Resolution of 1080P, 30FPS, Stream1, and output NDI with nodec n264.
@@LeoPazzo I'm testing on the Z Cam E2C, I can also try on my Z Cam E2-S6 here in a moment.