Yees,the Pakistani water buffalo splits with the foam rubber . I have also made a number of good sheaths, for the VASTLY improved D-2 knives that they are now producing. I think these sheaths are so that they are not shipping 'bare blades' that some borders will not accept.
What is a good cheaper sewing machine for leather. I hand sew everything I make. I'm new to leatherwork and would like to be able to sew quicker. Also. What leather company should I buy from.
Good and cheaper are two different categories for leather stitching machines in my opinion. I started with a Tippmann Boss which was much better than hand stitching. One of my complaints was that it wasn't reversible, and they do have a reversible version now and it is actually cheaper than it used to be when I bought one 15 years ago. Cobras from leather machines are great stitchers. That is what I currently have. Cowboy machines are good too. I buy from Springfield leather company for the Hermann oak leather I use. I have also bought from Weaver. And I have a Tandy store nearby that I buy hardware from. And there is a small business in St Louis I get dyes and glue from called STLeather.
@@bransonsgeneralstore thanks for responding. I'll look at those machines tonight. I'm definitely not a pro. I started when I got a kit for Father's day and have made approx 40 or so projects now. My work has gotten better since I first started. Enough so that my next leather will be quality 9 to 11 ounce rather than 7 or 8 ounce. I've got a good collection of stamps and tools now. Thank you. I enjoyed watching this video. I'll probably ask questions later in too.
I always appreciate your videos, thank you! I learn something every time I watch you work. I made two horizontal carry sheaths recently, one for a nice older Sharpfinger, that was a bit of a challenge. I love your tips and tricks and share in the learned from mistakes with fasteners and getting things backwards. I had my pattern on the wrong side a few projects back and made a left hand sheath when I wanted a right hand. I ended up making both and the customer got two for the price of one! Thanks again!
Retaining strap would be more convenient if it was bottom over top, that way it's easier & faster to thumb down once you've got your hand around knife hilt. As it is it looks like it's probably clumsy trying to undo & extract knife.
Nice work. I have a green river butcher knife. Between the upsweep at the tip and the square handle with no guard, I can't figure out how to secure it in a vertical sheath. Do you have any suggestions? Thanks.
I made one for a green river skinner once and left the spine of the sheath open and put a strap around the back of the blade before the curve. Not sure if that will work with the butchers knife. If you use a wide enough strap to keep the blade from pivoting around it, and keep the sheath a close fit on the straight part of the blade you might be able to trap that curved tip in there with the strap.
It can. If the knife has a guard on the spine side it is usually better to put the strap around that. In this case a horizontal sheath with a retention strap was requested. If you are especially worried about it you can make the strap so it gets further out of the way when unsnapped. You can also rivet the strap to the back of the sheath and if it gets cut just cut the rivets with a nipper and replace the strap.
I lose track of time while working so I am not sure. Probably two or three hours not including time for dye and finish to dry. The leather I use depends on the project, but mostly I use Hermann Oak sides for anything carved, and double shoulders from Tandy if it is a project that I don't think needs the good stuff.
@@bransonsgeneralstore Thanks for the reply. I’m new at leather work and appreciate the info. I keep two or three projects going and juggle back and forth as they dye or glue. But even as a beginner I noticed the difference in using better leather. Thanks cheers.
@@bransonsgeneralstore i’ve actually owned two of them. The one I got back in the 90s I passed on to my son, and then bought one for myself. They last forever and hold a good edge, and like you said in your video, the sheath is very sturdy and has never worn out
Probably. I think how I would do that without taking the sheath completely apart or starting from scratch. Make what is called a belt frog. Really just a piece of leather about 2 1/2" wide and maybe 5-6" long. Cut two slots about 2" long somewhere in the middle. These will be what your belt passes through. Cut another slot near one end big enough for the blade part of the sheath to fit through. Cut the rivet that holds the belt loop on the sheath and use that hole to rivet the sheath to the end of the frog without the slot for the blade.
Probably not but that is how the customer I was making this for described the knife. I have made sheathes for knives that were hand made or custom made knives. Not all knife makers learn how to make a good sheath.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
I keep coming back to this build, beautiful sheath. I wear mine in the front so would need to flip it I guess.
Incredible ... amazing job thanks for sharing
Thank you for watching!
Your knife sheath turned out real nice.
Thank you!
Excelente trabajo..muy linda la conbinacion de los dos colores ...coincidente con los colores de los cuchillos....felicitaciones.
Not even close, can’t wait to see how this turns out.
Beautiful work, sir.
Thank you!
No worries, thanks
Fantastic job man. I really like that
Thank you!
Yees,the Pakistani water buffalo splits with the foam rubber . I have also made a number of good sheaths, for the VASTLY improved D-2 knives that they are now producing. I think these sheaths are so that they are not shipping 'bare blades' that some borders will not accept.
Great looking sheath definitely worth more than the $25 knife ,thats whry the sheath are so cheaply made
Great video
Thank you!
Would love to have one.. of them in brown/dark awesome
That is really nice 👍I would like to buy one like the one 🤔you made for the buck knife 🤷🏽how do I go about in order to do that?
I don't sell custom work online. I have a full-time job and enough business locally to keep me busy. Sorry.
Beautiful brother
Thank you!
Do you make custom sheaths? If so please advise. Thanks
Steve
I don't sell custom work online. I have a full-time job and enough business locally to keep me busy. Sorry.
What is a good cheaper sewing machine for leather. I hand sew everything I make. I'm new to leatherwork and would like to be able to sew quicker. Also. What leather company should I buy from.
Good and cheaper are two different categories for leather stitching machines in my opinion. I started with a Tippmann Boss which was much better than hand stitching. One of my complaints was that it wasn't reversible, and they do have a reversible version now and it is actually cheaper than it used to be when I bought one 15 years ago. Cobras from leather machines are great stitchers. That is what I currently have. Cowboy machines are good too. I buy from Springfield leather company for the Hermann oak leather I use. I have also bought from Weaver. And I have a Tandy store nearby that I buy hardware from. And there is a small business in St Louis I get dyes and glue from called STLeather.
@@bransonsgeneralstore thanks for responding. I'll look at those machines tonight. I'm definitely not a pro. I started when I got a kit for Father's day and have made approx 40 or so projects now. My work has gotten better since I first started. Enough so that my next leather will be quality 9 to 11 ounce rather than 7 or 8 ounce. I've got a good collection of stamps and tools now. Thank you. I enjoyed watching this video. I'll probably ask questions later in too.
That's looks very pretty, but I think I would catch both ends of that knife on everything around me whenever I turn.
I always appreciate your videos, thank you! I learn something every time I watch you work. I made two horizontal carry sheaths recently, one for a nice older Sharpfinger, that was a bit of a challenge. I love your tips and tricks and share in the learned from mistakes with fasteners and getting things backwards. I had my pattern on the wrong side a few projects back and made a left hand sheath when I wanted a right hand. I ended up making both and the customer got two for the price of one! Thanks again!
I have definitely made that mistake before myself, especially when I first started making holsters. Thanks for watching!
Retaining strap would be more convenient if it was bottom over top, that way it's easier & faster to thumb down once you've got your hand around knife hilt. As it is it looks like it's probably clumsy trying to undo & extract knife.
Nice work. I have a green river butcher knife. Between the upsweep at the tip and the square handle with no guard, I can't figure out how to secure it in a vertical sheath. Do you have any suggestions? Thanks.
I made one for a green river skinner once and left the spine of the sheath open and put a strap around the back of the blade before the curve. Not sure if that will work with the butchers knife. If you use a wide enough strap to keep the blade from pivoting around it, and keep the sheath a close fit on the straight part of the blade you might be able to trap that curved tip in there with the strap.
Does the retaining strap ever get cut upon drawing the knife?
It can. If the knife has a guard on the spine side it is usually better to put the strap around that. In this case a horizontal sheath with a retention strap was requested. If you are especially worried about it you can make the strap so it gets further out of the way when unsnapped. You can also rivet the strap to the back of the sheath and if it gets cut just cut the rivets with a nipper and replace the strap.
What is that tool that you used at 13:48-14:00 to finish the edge of the leather?
It's a wooden slicker. It has several sizes of round grooves that are used to shape and burnish the edges
Your expertise and artistry is awesome. Do you still make custom knife sheaths ? All the best in all future endeavors.
Thank you very much.
@@bransonsgeneralstore Do you still make custom knife sheaths please? THX
What pattern did you use in the stamping in the middle . I am making some sheaths for my knives and this is a nice project piece.
The tool I used is the largest E294 craftool stamp. Tandy's SKU# for it is 66294-03. Or if you prefer here is an amazon link for it. amzn.to/3zJJP1L
Nice ! Great job. Great video.
What leather brand do you use? And how long in real time did it take. Thanks.
I lose track of time while working so I am not sure. Probably two or three hours not including time for dye and finish to dry. The leather I use depends on the project, but mostly I use Hermann Oak sides for anything carved, and double shoulders from Tandy if it is a project that I don't think needs the good stuff.
@@bransonsgeneralstore Thanks for the reply. I’m new at leather work and appreciate the info. I keep two or three projects going and juggle back and forth as they dye or glue.
But even as a beginner I noticed the difference in using better leather. Thanks cheers.
I have had that exact same buck knife For over 20 years - I want to say t's a model 110 but I can't remember
This is a 119. Buck has made tons of them.
@@bransonsgeneralstore i’ve actually owned two of them. The one I got back in the 90s I passed on to my son, and then bought one for myself. They last forever and hold a good edge, and like you said in your video, the sheath is very sturdy and has never worn out
Can I turn my 119 sheath into a horizontal sheath
Probably. I think how I would do that without taking the sheath completely apart or starting from scratch. Make what is called a belt frog. Really just a piece of leather about 2 1/2" wide and maybe 5-6" long. Cut two slots about 2" long somewhere in the middle. These will be what your belt passes through. Cut another slot near one end big enough for the blade part of the sheath to fit through. Cut the rivet that holds the belt loop on the sheath and use that hole to rivet the sheath to the end of the frog without the slot for the blade.
Thank you that's a great help
Thats a custom knife?
Probably not but that is how the customer I was making this for described the knife. I have made sheathes for knives that were hand made or custom made knives. Not all knife makers learn how to make a good sheath.
I'M NOT SEEING A LINK TO YOUR STORE. HAVE YOU MAK ME ONE.
I don't sell custom work online. I have a full-time job and enough business locally to keep me busy. Sorry.
Just what I want, and it's beautiful. Any one you can refer work to? Thanks
#notimressed
Walmart plastic