Fanatec used red loctite on two screws at 09:00. I stripped screws on my club sport pedals v3, I’m guessing red loctite. Never in a million years did I think this was the case. Red loctite means PERMANENT.
For as long as this product been out how is it that trying to update the firmware for this product have to be so damn difficult. Seriously checked the forums and people have been having this issue for months.
I would like to have some some support since I’ve podium F1 DD bought brand new less than 2 weeks old and I just purchased universal hub v2 and it is not recognized by the wheel base however the f1 wheel is working fine got the Hub replaced for another new one and issue still the same . base firmware is up to date. Any suggestions!!
Wow I chose thrustmaster last year, fanatec is really gone crazy with marketing, sponsorships and new rims , thrustmaster looks pathetic by comparison with that Frankenstein 248 wheel , I would love these universal rims for mod rims.......but sadly I've invested too much in TM now to start over again ....until they do a DD that is ...
did you ever figure it out because i’m having the same problem i can’t seem to get past the enable torque i can’t figure out what my ok button is and my shifters are not working
@@KlaytonnnTV After hours of messing with it I ended up re-downloading the software and everything started working The OK button is the middle button of the three on the right bottom corner of the wheel
It a known issue of the podium... You have to open a support ticket and the will repair the wheelbase. Just done on mine... Plenty of guys on fanatec forum with this issue as well
Mine broke after not even a year of owner ship of not regular use I used it probably 2 or 3 times a week and I hardly took it off the base and some how the pins are miss aligned and bent
I have the v1, and I simply do not want to buy the v2 as it seems there is a continuing issue (fanatec forums with this exact issue have minimal response and no answers within from devs) with the rsb and lsb buttons acting as the rb and lb buttons respectively. This has continued on through the years and many driver and firmware updates without fix. What guarantee to a fix is likely if I as a customer am going to continue giving you guys my hard earned money. two shifters broken, csr elite issues, it continues on. Where is the same dedication to Xbox FANatecs as to Sony fans. Where is our dual knob control boards and podium series kits. How can I play forza and lose half my inputs to message and change radio, then also 4 more buttons to doubling up on inputs like right trigger and left trigger as well. THAT IS WHAT MY FANATEC PEDALS ARE FOR! A v2 release that is just an uprated board but still needs a different QR accessory is not a V2, but a 1.5. Poor effort...
The Version 1 is really good, the V2 looks better, the details look well overhauled
Thank you for that. Roll on delivery from Monday.
Vibin to the tunes
Came for the instructions, stayed for the music.
Fanatec used red loctite on two screws at 09:00. I stripped screws on my club sport pedals v3, I’m guessing red loctite. Never in a million years did I think this was the case.
Red loctite means PERMANENT.
Id love to see a video on how to mount the drift wheel. The cap that comes with it is flat, but the area around the mounting screws is curved. ??
Great video! As long as I have the Fanatec playstation compatible wheelbase, I don't need anything else to make the v2 Xbox hub work, right?
yeah I have it and it works on my ps5
how do you remove the funky switch connector ? i tried and it's seem stucked I don't won't to force and damage the connector
Well done fanatec
The screws used to attach the QR2 to the hub are impossible to reach with the included screwdriver due to the angle.
For as long as this product been out how is it that trying to update the firmware for this product have to be so damn difficult. Seriously checked the forums and people have been having this issue for months.
Mine didn’t even come with the adapter and I paid $100 extra for the qr2 🤦♂️ let’s see how long this takes to figure out
I would like to have some some support since I’ve podium F1 DD bought brand new less than 2 weeks old and I just purchased universal hub v2 and it is not recognized by the wheel base however the f1 wheel is working fine got the Hub replaced for another new one and issue still the same . base firmware is up to date. Any suggestions!!
Hi, did you ever get it figured out?
I’m trying to set the steering wheel up on a gaming system. How do you assign the controls?
I didnt even know you can flip the screen horizontal
Wow I chose thrustmaster last year, fanatec is really gone crazy with marketing, sponsorships and new rims , thrustmaster looks pathetic by comparison with that Frankenstein 248 wheel , I would love these universal rims for mod rims.......but sadly I've invested too much in TM now to start over again ....until they do a DD that is ...
Fanatec makes a 350 euro dd base now
Cut your losses and come to the light side with the green sabers
Reuse same bolts for qr2 install or not?
How do I make the hub work on a podium because it’s not working
did you ever figure it out because i’m having the same problem i can’t seem to get past the enable torque i can’t figure out what my ok button is and my shifters are not working
@@KlaytonnnTV After hours of messing with it I ended up re-downloading the software and everything started working The OK button is the middle button of the three on the right bottom corner of the wheel
Am I the only one that messed up the screws to put the wheel on ?
Is it full compatible with Farming Simulator 22?
I can’t reach the buttons from the nascar wheel . I know the solution but why sell a bundle that’s flawed. Nascar v2 with hub
what is it? help!
how to show speed in tuning menu
probably should've included a 8mm wrench with such an expensive product.
My hub won’t connect to the base, it flashes and doesn’t connect. Can anyone help?
It a known issue of the podium... You have to open a support ticket and the will repair the wheelbase. Just done on mine... Plenty of guys on fanatec forum with this issue as well
Do you have jet fighter controller set?
nice
Mine broke after not even a year of owner ship of not regular use I used it probably 2 or 3 times a week and I hardly took it off the base and some how the pins are miss aligned and bent
the two screw at the front for the case are not the smartest idea :/ my custom made rim does not work with this hub anylonger
is it good for a 350mm wheel ?
they sell one themselves
is this some sort of torture machine.
How do I make this work on Xbox one as it doesn’t work for me?
I have the v1, and I simply do not want to buy the v2 as it seems there is a continuing issue (fanatec forums with this exact issue have minimal response and no answers within from devs) with the rsb and lsb buttons acting as the rb and lb buttons respectively. This has continued on through the years and many driver and firmware updates without fix.
What guarantee to a fix is likely if I as a customer am going to continue giving you guys my hard earned money. two shifters broken, csr elite issues, it continues on.
Where is the same dedication to Xbox FANatecs as to Sony fans. Where is our dual knob control boards and podium series kits.
How can I play forza and lose half my inputs to message and change radio, then also 4 more buttons to doubling up on inputs like right trigger and left trigger as well. THAT IS WHAT MY FANATEC PEDALS ARE FOR!
A v2 release that is just an uprated board but still needs a different QR accessory is not a V2, but a 1.5.
Poor effort...