The Best Way to Sync the DFAM to Your DAW

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 75

  • @chrism5931
    @chrism5931 3 ปีที่แล้ว +5

    Dude, thank you so much for this. I have been banging my head against brick walls for hours watching so many complicated videos. This is THE way. Thanks again, man.

    • @cameronpatrick7986
      @cameronpatrick7986 3 ปีที่แล้ว

      dunno if anyone gives a shit but if you are bored like me atm you can watch all of the latest series on Instaflixxer. Have been binge watching with my gf for the last weeks :)

    • @josuedraven3070
      @josuedraven3070 3 ปีที่แล้ว

      @Cameron Patrick Yup, have been watching on InstaFlixxer for since november myself :D

    • @SidechainStudios
      @SidechainStudios 3 ปีที่แล้ว

      -This is not the way.
      Clock CV Out from Ableton, via Instrument Cable, to your DFAM.
      Welcome :)

    • @sabinbadea94
      @sabinbadea94 ปีที่แล้ว

      @@SidechainStudiosyou need a DC couple audio interface. Not everybody has it

    • @SidechainStudios
      @SidechainStudios ปีที่แล้ว

      @@sabinbadea94 Since this involves sending a Clock signal (as opposed to Pitch, for example), you can achieve this without DC Coupling…
      With other signals (such as Pitch), the lack of DC Coupling gradually ‘curves’ the signal towards the 0.0 line -
      With Clock signals (crossing the 0 line mamy times per-moment), this is not noticable…
      -Try it, you’ll be surprised!

  • @strawmanhat
    @strawmanhat ปีที่แล้ว +2

    Skip steps by using sequencer pitch to control per step tempo. Wild. I never used the tempo in. Thanks man. Opens up shorter sequences and keeps DFAM tempo control open for super high rate crazyness. That's two big doors. And I love the ableton sequence idea as clock too. Don't think I'll do it in general, but it's a good composition tool.

  • @SamMcEwin
    @SamMcEwin 9 หลายเดือนก่อน

    This is brilliant! Thank you for sharing. Great tutorial.

  • @ghostinplainsight4803
    @ghostinplainsight4803 2 ปีที่แล้ว +4

    Check out the MAFD (Midi Adapter for DFAM) you can play the sequence in any order using a midi track to control the steps. It does a similar trick to using the pitch where it sends pulses to skip steps.

  • @ManCalledMif
    @ManCalledMif 3 หลายเดือนก่อน

    Excellent explanation 🎉

  • @D3MOR
    @D3MOR ปีที่แล้ว

    Solved my problems !!! thank you very much ❤‍🔥❤‍🔥❤‍🔥

  • @IMFO
    @IMFO 4 ปีที่แล้ว

    Thanks, that helped a lot! I am using a Multiplier to split the clock. Thank you Sir :)

  • @kpkyle
    @kpkyle 4 ปีที่แล้ว +1

    Thank you for uploading this :)

  • @MirrorLake_mx
    @MirrorLake_mx 4 ปีที่แล้ว +1

    Great Im using the microbrute to send gate and it work´s perfect

  • @mike_qbik
    @mike_qbik 4 ปีที่แล้ว +1

    Can you still use Keystep to and Midi duties - like master keyboard for various MIDI devices selected either by Ableton or other hardware sequencer using MIDI - in this case Ableton would be master (Digitakt using USB to slave Ableton) ? Thank you.

  • @temporoboto
    @temporoboto 3 ปีที่แล้ว

    Well done sir!

  • @jamessusbilla
    @jamessusbilla 3 ปีที่แล้ว

    awesome. thank *YOU*

  • @Audiojunkk
    @Audiojunkk 4 ปีที่แล้ว

    Very very nice!

  • @SanderHaccou
    @SanderHaccou 9 หลายเดือนก่อน

    Question, after connecting my dfam to the keystep as described. Exactly as described. The DFAM got a completely distorted signal. I unplugged everything but the DFAM still is in defect. There is no clear signal coming from the oscillators nor from the noise generator. I did check the voltage output of the keystep gate afterwards. It was on 12 V so too much. Anybody any suggestions to fix the dfam? It is not working properly anymore. It does give only prober signal when the VCF MOD input is plugged in??

  • @ZenMountain
    @ZenMountain 3 ปีที่แล้ว

    Thanks!!

  • @romantio
    @romantio 2 ปีที่แล้ว

    can i connect DFAM if i have a behringer model D ? Will the sound quality drop in this case?

  • @EmygdioCosta
    @EmygdioCosta 5 ปีที่แล้ว

    Awesome video!!!

  • @acolella30
    @acolella30 5 ปีที่แล้ว +5

    Hey, great video. I tried doing this, but I'm having an issue where instead of the dfam responding to midi notes sent from ableton, it's advancing based on the sequence from my keystep. So basically i think when i hit play in ableton it's just starting my keystep sequence. Is this an ableton issue or keystep issue? Thanks!
    Edit: figured it out! I wasn't actually sending midi to the keystep, just synced it.

    • @shbl2270
      @shbl2270 4 ปีที่แล้ว +1

      Hi! So is it possible to sync the tempo from DFAM via Keystep with Ableton? And how did you do it? I would really appreciate your help since I can´t find a clear answer anywhere.

    • @afonso_25
      @afonso_25 3 ปีที่แล้ว

      I'm having the same problem, do you know how to solve that?

  • @mixmcinfrarave
    @mixmcinfrarave 11 หลายเดือนก่อน

    Midi CV converter ?

  • @sicoblum
    @sicoblum 2 ปีที่แล้ว

    Could you be so kind to share the link where to get the stacked cable ? That’s the only thing i don’t have

    • @PeaksofValleys
      @PeaksofValleys  2 ปีที่แล้ว +1

      I got mine here: modularaddict.com/parts/cables/stacking-cables

  • @BenBlauRecordings
    @BenBlauRecordings 5 ปีที่แล้ว

    My Keystep won't send the Gate to the DFAm. It seems to be only receiving the Clock from my DAW (wihich is btw. Reaper). The Midi-Notes from the DAW aren't transfered to the Gate-Out of the keystep, so it seems.. any workaround here?
    With an Erebus as Midi-Gate-Interface it works perfect.

    • @PeaksofValleys
      @PeaksofValleys  5 ปีที่แล้ว

      Glad you got it working with the Erebus. I'm not too familiar with Reaper but a few things to check to get it working with the keystep... Check your midi hardware preferences, it might be set to send sync out vs midi out on the keystep. Also make sure the keystep is set right on the back panel, usb if using it that way, or midi if you are using a separate midi interface.

  • @stilarchief5135
    @stilarchief5135 3 ปีที่แล้ว

    at 00:27 : how do you send a track to the keystep in Logic Pro X instead of Ableton? I don't think it has this option in Logic

    • @PeaksofValleys
      @PeaksofValleys  3 ปีที่แล้ว

      I’m not as familiar with Logic, but this might be what you need… support.apple.com/guide/logicpro/external-instrument-controls-lgcp12e7acdc/mac

    • @stilarchief5135
      @stilarchief5135 3 ปีที่แล้ว

      @@PeaksofValleys it worked thanks!!

  • @jean-philippelefebvre2530
    @jean-philippelefebvre2530 4 ปีที่แล้ว

    @peakofvalleys good sir, I've clocked my DFAM to my SH01A via the Gate out on the SH01A into the ADV/Clock on the DFAM. However, whenever I press play in Ableton it feels like it's playing at halftime on the DFAM. Any ideas? For ex: recorded a jam from DFAM alone, tapped out the BPM to 140, when I went to set Ableton to 140 to create a new jam, clocked at that speed it felt much slower. Even if I move Ableton up to 150 it still doesn't feel the same. Any suggestions would be greatly appreciated

    • @PeaksofValleys
      @PeaksofValleys  4 ปีที่แล้ว

      a few things to check... make sure you have that midi track in Ableton sending out to the SH01A. the midi clip you are using on that track to send gate out to the DFAM will need to have 1 midi note per bar and the note needs to end before that bar is over or it won't act as a gate out to the DFAM. The DFAM tempo knob also needs to be all the way down.

  • @78thandSynth
    @78thandSynth 3 ปีที่แล้ว

    Just ordered sound studio so scrambling to learn how to insert to Reaper.

  • @juanjo041276
    @juanjo041276 3 ปีที่แล้ว

    What happens with the "sync out" of the keystep? Can't work with DFAM?

    • @PeaksofValleys
      @PeaksofValleys  3 ปีที่แล้ว +2

      Using sync out of the keystep to the dfam adv/clock will keep it locked to the tempo of the keystep (or whatever clock the keystep is receiving) but you will not be able to do subdivisions like you can as shown in the video.

  • @RAF-vq7yu
    @RAF-vq7yu 4 ปีที่แล้ว

    I h@ve no such problem .I have got Korg monologue which have dedicated sync in and sync out output ADV/CLOCK input. This is little confusing because this output is under the row titled output, hovever it is indeed input for synchronization of DFAM to external devices. It is not only way to control tempo with DFAM, There's many more other options.

  • @dilaif6497
    @dilaif6497 4 ปีที่แล้ว

    Can you make this with pitch info from ableton ? Like to be in key as well when you make a sequence

    • @PeaksofValleys
      @PeaksofValleys  4 ปีที่แล้ว +3

      Yes, using the keystep as an example again you can send Gate and Pitch CV out to the DFAM Trigger and VCO 1 CV. That will get the keystep to control the DFAM like a keyboard (once you tune it). The trick to get sequences from Ableton is to set a MIDI track going out to the keystep. I use a MIDI interface for this because if I have the keystep plugged into my computer via USB it brings a lot of noise with it. But you should be able to get it done via MIDI over usb to the keystep too. Depending if you are using a midi cable or usb you'll have to adjust the back of the keystep accordingly. This sounds more complicated than it really is... at some point perhaps I'l do a video of the process.

    • @afonso_25
      @afonso_25 3 ปีที่แล้ว

      @@PeaksofValleys hey, I am still not able to control the dfam with midi from ableton. I have the keystep plugged into my computer via USB and I tried pretty much everything and followed all the steps in the video but I am really not getting it right. What do you mean by having to adjust the back of the keystep? Anything besides the cv out to the dfam with the patch cables? Any help would be really appreciated, thank you!

    • @juanmico4085
      @juanmico4085 3 ปีที่แล้ว +1

      @@afonso_25 He means the two little switches to select what the Keystep is listening to. If you're sending midi from Ableton to the Keystep via USB, then you need to set these switches accordingly.

    • @afonso_25
      @afonso_25 3 ปีที่แล้ว

      @@juanmico4085 thank you, that helped since I didn't know about those switches. But I am still not able to send midi to the dfam, what's the options you choose on the midi ports and all that?

    • @juanmico4085
      @juanmico4085 3 ปีที่แล้ว +1

      @@afonso_25 I don't even own a Dfam or a Keystep. I'm just going by logic. If you set a midi track on Ableton to send notes to the Keystep, this will send gate signals to the Dfam to make the sequencer advance one step per gate received.
      Have you followed the suggestions, like setting Dfam tempo all the way down, notes to end before the end of each beat, etc?
      Try connecting the gate out from the Keystep to the Adv/Clock on the Dfam, instead of what's shown in the video. See if that works.

  • @SidechainStudios
    @SidechainStudios 3 ปีที่แล้ว

    i dont use any of that -
    just a ‘CV OUT’ module from ableton, going out from my audio card

    • @alexisdelozanne5781
      @alexisdelozanne5781 3 ปีที่แล้ว

      Hello, which audio card do you have ?

    • @SidechainStudios
      @SidechainStudios 3 ปีที่แล้ว

      @@alexisdelozanne5781 Im actually using a Interface with no DC coupling (Focusrite Clarett), but since DC coupling isn’t required when using a Gate CV, it works great for sync/clock (but not for anything Pitch-related)

    • @alexisdelozanne5781
      @alexisdelozanne5781 3 ปีที่แล้ว

      @@SidechainStudios thank you for your answer, ok so you just link your scarlett to the dfam through a cv cable ?

    • @SidechainStudios
      @SidechainStudios 3 ปีที่แล้ว +1

      @@alexisdelozanne5781 standard mono audio cable

    • @alexisdelozanne5781
      @alexisdelozanne5781 3 ปีที่แล้ว

      @@SidechainStudios thank you

  • @mixmcinfrarave
    @mixmcinfrarave 11 หลายเดือนก่อน

    I have KENTON Pro 4 and 2

  • @haus_cat
    @haus_cat 2 ปีที่แล้ว

    I have never felt as stupid as I do trying to sync the dfam to ableton. I can manage creative ideas and making tracks but setting things like this up just is a massive downer 😂

    • @PeaksofValleys
      @PeaksofValleys  2 ปีที่แล้ว +2

      dude I know this feeling. It took me forever to wrap my head around this. Plus half the time I'd be troubleshooting thinking I had it right only to realize I did something stupid like have the filter in HP or have the volume or VCA decay completely down!!

    • @jake000916
      @jake000916 ปีที่แล้ว

      @@PeaksofValleys try adding a ERM multicllock to the confusion. I have been stuck in dipshit land for 3 months.

  • @kletsgoo
    @kletsgoo 4 ปีที่แล้ว

    Maybe check the Retrokits RK-006 too, it offers 10 outputs which you can switch to MIDI or Gate and even a little CV. You can trigger any kind of rhythm pattern from a different separate outputs on it th-cam.com/video/TVppoF3KY0E/w-d-xo.html

  • @sanderhaccou1970
    @sanderhaccou1970 9 หลายเดือนก่อน

    Question, after connecting my dfam to the keystep as described. Exactly as described. The DFAM got a completely distorted signal. I unplugged everything but the DFAM still is in defect. There is no clear signal coming from the oscillators nor from the noise generator. I did check the voltage output of the keystep gate afterwards. It was on 12 V so too much. Anybody any suggestions to fix the dfam? It is not working properly anymore...
    \