Nice, Thanks for this video. With this CheatDevice i can now finally play GTA in peace without rage quitting and i can now finally play GTA 3 and even VC in peace with no wanted level bullshit, no getting busted, having Infinite Armor/Health, and plus no pedestrians treating me like crap or anything because i got SO sick of gangs always shooting me for no reason and i was always tired of the hostile behavior of NPC's in GTA games due to my PTSD, so this does help a lot.
Is the usb formatted as fat32? I have come to learn over the years certain usb drives are recognized and some just aren't, so not sure if that is the case here or not, sorry
@@ProjectPhoenixMedia They're both fat 32, but I found a workaround. I'm just going to use the small one to enter cheats, click start game, go to boot.boot.elf, back into Elf. Then enter the OPL loader from the memory card0 and then swap usb's with the one for my games so that the cheats I placed are still there.
Hi, thank you for all the tutorials you've made over the years. It's very much appreciated. Is there a way to install this cheat engine on internal HDD? Thank you! 👍👍👍
Hmm. Need a more descriptive version of how to do this. You go too fast, and don't explain a few steps. A bit of a more descriptive video would be nice to those of us who aren't that tech savvy. I should also mention I use the SSD method to play my games, so, any tips or advice how to do it with that method would be appreciated. I know this video is two years old, and the last few videos I looked at of other youtubers haven't been of much help since they don't seem to want to respond to my questions or inquiries. Any help you can perhaps provide would be nice. Thanks in advance.
I will admit the ps2 scene and how to do X task can be a bit complicated, because it requires some knowledge of how to get started in the first place. I think the first course of action is find out what is your PS2 model number, fat or slim, and if slim, is it a 9k model or lower mode. 9k models cannot use FMCB (free mcboot) which is a homebrew memory card. All fat and slim models under 9k can use FMCB. If you don't have FMCB, look up FreeDVDBoot and see if that can work with your system. If it does, then you can look up a follow up video on how to softmod your memory card to FMCB, and then from there run a program called OPL to play your PS2 games. It's a lot of detail to explain in a comment, but if you can tell me what is your PS2 model number, then I could try to come up with some kind of general video for 2023 that walks through minimum from A to Z.
Once you run FMCB, go to your mass drive and run the installer for the newer FMCB. I don't run newest FMCB because I have a modchip and it doesn't work for later versions.
is there any way to set this up so then when i boot into freemcboot it shows up in the same list the opl loader shows up in its a pain having to go into the file browser just to use cheats id rather the elf file load up to the home screen so i can launch it from there
You can setup in FMCB I believe like controller shortcuts so holding a button down on boot up loads a home-brew on demand. If not, then worst case ulaunchelf has this functionality too.
i want to play Monster Hunter Dos, but couldnt find the raw codes, only found the CB7+, when i try to convert it to raw and add it, i dont think it's working when i play the game
im sorry for the dumb question but i have a 2tb hdd on my ps2. how do i copy the folder from a the usb to the hdd. i cant figure it out to save my life
I can get this to work with my memory card but id much rather have it on my hard drive. I can load the app with my harddrive but cant get the cheats to show up. What am I forgetting?
I downloaded it and did exactly what the video showed and I opened up cheat device to seeing nothing. I also have another problem with codebreaker too like the Cheats won’t work
I don't know why it doesn't show, I did make a usb follow up tutorial that bypasses black screen if that is what you have. Or try cheat device as alternative.
No, I don't have that kind of video. I believe it is the OPL daily build that has the app feature. If that is from ps2-home then I can't visit that site anymore, but I'm sure there are other videos online or google guides that show you how to setup ps2 apps. Once you understand the process, then cheat device should be no different from app shortcut standpoint. If it is making a shortcut from FMCB menu for example, then yes I have a video on that.
hey I'm having an issue I added cheats to a game and after I was done I tried saving my configuration and booting from mc0:boot/boot.elf but it's stuck any suggestions?
I haven't used this with that game specifically, not sure if that is a bug or if another work around. In general, I got this program to work with games running off of usb, so I think it should be fine too if a compatible game is running off of internal hdd.
My only problem is i cant add it to my home screen funtuna broweser cuz it has buncha files along side it dont know how to add it there so i wont ulaunch it everytime i want it
Bang pas sya save di usb copy di memory kok sya coba di mass atas ga bsa bwah juga ke baca di memory save game pas ke boot layar tv merah bang it kenapa ya bang
I'm getting an error message when trying to launch my game through opl using cheat device. error: could not run the item. How do I fix this? i'm using a phat ps2
So in order to add codes, what is this using? I tried adding Gameshark codes for Dragon Ball Z: Budokai Tenkaichi 3 (which wasn't even pre-loadedon the list) and either 1. It freezes the Cheat Device when trying to save or it never loads up the game.
I'll be trying this out since the codebreaker on my FMCB memory card just weirdly glitched its game menu and won't boot to UlaunchELF anymore. Do I have to copy this to MC0 or I can just boot it from USB?
I am trying to get it working on Burnout Revenge which I am playing through SMB on my PS2. Everything goes well until I boot up the game and notice that none of the cheats I enabled actually seem to be enabled. I am not sure what I should do as I do not know what the problem is. I did see that Burnout Revenge had some weird long name within CheatDevice, but I assume the names of the games in CheatDevice won't have to identically match those of my PS2 games I have working through SMB?
I can't comment if it does or not, give it a try. For some reason I thought one of the cheat programs is not compatible with PAL, but I'm not entirely sure as I'm mainly a ntsc user.
Is there a specific place this needs to be on the HDD? I have it with my other apps on it and it launches fine but none of the codes are there for games. If I launch it from my memory card or a USB device it works just fine.
I don't know off hand why it wouldn't work properly off the HDD assuming it has the database just like if running from memory card or usb. Not sure if that is a bug or requires a unique workaround for whatever reason. Maybe psx-place.com might have better idea as to what is going on
@@ProjectPhoenixMedia okay cool, I'll see what I can find over there. Worst case I'll just run it from my memory card with a shortcut. Thanks and appreciate the reply!
I don't know if I'm doing something wrong but when I try to load half-life cheats or any game for that matter or with cheats it just doesn't activate them it just plays the game normally from my USB
I don't know either if the cheats are looking for a specific game type or region? Oh well, at least you can play half life on pc and cheat there, right? Probably looks better and loads quicker too.
Dude there are some major games missing like God of war 2. And many useful cheats. When i tried to add game the entire cheat device games list was cut in half??
can some one help me ? i install cheat Device on my mmc but its always corrupted file after i install every time i check my mmc i say corrupted files but only cheat device corrupted
I didn't have issues with those games with cheats and ps2 opl. Please make sure it works in opl first, maybe try defrag or turn off fragmentation check first.
Simplest explanation: Do you have a way to boot into ulaunchelf? Then you can use the program to copy the Cheat Device file to the memory card. This assumes you have a mod chip or softmodded ps2 to do this function
@@ProjectPhoenixMedia Yeah, soo I have a FreeMcboot memory card, and of course ulaunchelf, but everytime I try to copy the file to the memcard from mass, only the name "cheatdevice" gets copied, but not all the files. Next thing I know is I'll just try then copy the CheatDevice. Elf file, and that works and paste in the memory card,.... But.... The CheatDataBase does not copy over to the memory card, soo when I load up the CheatDevice, it opens, but no cheats 🤔
Hi , I love all your work for the PS2 .I Am now getting into my PS2 ,since the lock down in 2020. I say now because I am still learning. Got issues when I put the cheatdevice on the MC, the freeMcboot exploit does not load up. What am I doing wrong??
FMCB should load independent of what home-brew programs are or are not installed. Get your FMCB working first, and then you can choose to copy the cheat device to the memory card, or to usb instead.
Not working with PAL. "The bundled cheat database is for NTSC-region games only..." edit: I got myself "Tekken 5 (USA) /ID SLUS_210.59". Then selected a few cheats, but in the game everything is on standart. Do you have to start the game through the program, or was it enough to activate the cheats?
Hey Man ...Can u give me a quick run down on how to make it work for funtuna and also make it appear on the interface I am a real noob at this sort of stuff Thanks 👍
I would think once you use funtuna to boot into ulaunchelf, then navigate to your mc0 or mass and run the cheat device elf file. Make sure the database is there, and then its like my video I would think for rest of the process.
My recommendation is play through disc 1 or whatever disc, get the save file saved. Then start the 2nd disc and load off the save and continue. There are no ways I know of to use ingame shortcuts to switch discs like popstarter.
@@ProjectPhoenixMedia I have codebreakers pre version 3 and 3.3, 4, 5, 6, 7, 9.2, 9.3, 10.0 and 10.1 there ELFs work on ps2 free mcboot Also i have Gameshark version 3.0 and 3.1 ELFs they work with free mcboot Also cheat device is based on codebreaker but it has more games of codes on it that weren't in codebreaker 10.1
Mr Einstein for the PS2, Thanks Brotha! "TASKS REQUEST" I Wonder if IT WOULD BE POSSIBLE to Find the Cheats code(s) for PS2 Lord of the Rings The Two Towers? Lord of the Rings Return of the King?, Rapala ProFishing? Mark Davis Pao Bass Challenge? that would "UNLOCK EVERTYHING" Hmmm, Hmmm (Rubbing my Chin?)
![[How To] Use Codebreaker10 With OPL PS2 USB Games Tutorial (English)](http://i.ytimg.com/vi/02pOWwRdRQ8/mqdefault.jpg)
![[How To] Use Codebreaker10 With OPL PS2 USB Games Tutorial (English)](/img/tr.png)
Enjoy using cheats! What are your favorite ps2 games to play with cheats? Let us know!
Oh great
Other than gradius, which is one of my favorites. Any ea big title. I would like to see cheats for either final fantasy
@@troy3sherman1 come on man
RE4
Gran Turismo 3 & 4
Absolutely great.
Although, some cheats and games aren't on here, but not everything can be 100% perfect
Nice video I put in the usb hit launch.elf then mass but no codes or games appear the blue center square is empty any help?
worked like a charm! the only game im having issues with is GT3 A-Spec
Nice, Thanks for this video. With this CheatDevice i can now finally play GTA in peace without rage quitting and i can now finally play GTA 3 and even VC in peace with no wanted level bullshit, no getting busted, having Infinite Armor/Health, and plus no pedestrians treating me like crap or anything because i got SO sick of gangs always shooting me for no reason and i was always tired of the hostile behavior of NPC's in GTA games due to my PTSD, so this does help a lot.
Another great video! Working for me, thank you very much!
You can use the skinny PS2
Error loading cheat database
your awesome my brother wanted dead to rights 2 cheats and now he and I can use cheats ty
Thank you this helped me a lot
Your the best I love all of your videos
Can you please explain what you are doing from 1:03 - 1:07
I enabled the cheats, and then press circle a few times to back out to start the game, and then follow the rest of the video.
Thanks bro you deserve my subscribe. I love it
thanks again idol..number 1 fan from Philippines...
Join our discord and say hi!
@@ProjectPhoenixMedia link
so simple yet so good nice man keep up
Awesome program. Thanks for the video.
Everytime I boot it from my USB, the game list never shows up, but on my smaller one. That I don't use for games. It shows. I'm getting frustrated.
Is the usb formatted as fat32? I have come to learn over the years certain usb drives are recognized and some just aren't, so not sure if that is the case here or not, sorry
@@ProjectPhoenixMedia They're both fat 32, but I found a workaround. I'm just going to use the small one to enter cheats, click start game, go to boot.boot.elf, back into Elf. Then enter the OPL loader from the memory card0 and then swap usb's with the one for my games so that the cheats I placed are still there.
@SO10* yes. check if your usb device is GPT or MBR. It must to be MBR. And Drive Format must FAT32. MBR+FAT32 = no issues
Hi, thank you for all the tutorials you've made over the years. It's very much appreciated.
Is there a way to install this cheat engine on internal HDD? Thank you! 👍👍👍
I would think so, copy that .elf file to hard drive and then run it.
@@ProjectPhoenixMedia much obliged 👍👍
Hmm. Need a more descriptive version of how to do this. You go too fast, and don't explain a few steps. A bit of a more descriptive video would be nice to those of us who aren't that tech savvy. I should also mention I use the SSD method to play my games, so, any tips or advice how to do it with that method would be appreciated. I know this video is two years old, and the last few videos I looked at of other youtubers haven't been of much help since they don't seem to want to respond to my questions or inquiries. Any help you can perhaps provide would be nice. Thanks in advance.
I will admit the ps2 scene and how to do X task can be a bit complicated, because it requires some knowledge of how to get started in the first place. I think the first course of action is find out what is your PS2 model number, fat or slim, and if slim, is it a 9k model or lower mode. 9k models cannot use FMCB (free mcboot) which is a homebrew memory card. All fat and slim models under 9k can use FMCB. If you don't have FMCB, look up FreeDVDBoot and see if that can work with your system. If it does, then you can look up a follow up video on how to softmod your memory card to FMCB, and then from there run a program called OPL to play your PS2 games.
It's a lot of detail to explain in a comment, but if you can tell me what is your PS2 model number, then I could try to come up with some kind of general video for 2023 that walks through minimum from A to Z.
@@ProjectPhoenixMedia i have 77xxxx model with opl how to use cheats
Sir, please make video about How to instal fmcb using FMCB Installer newest version & including the link on the description.
Great tutorial btw
Once you run FMCB, go to your mass drive and run the installer for the newer FMCB. I don't run newest FMCB because I have a modchip and it doesn't work for later versions.
hey whats up so I have an internal 2tb hdd can i get this onto my main menu selection or do I have to pull it up from the files each time?
click Free HDboot from your home screen then click configure OSDYS
is there any way to set this up so then when i boot into freemcboot it shows up in the same list the opl loader shows up in its a pain having to go into the file browser just to use cheats id rather the elf file load up to the home screen so i can launch it from there
You can setup in FMCB I believe like controller shortcuts so holding a button down on boot up loads a home-brew on demand. If not, then worst case ulaunchelf has this functionality too.
i want to play Monster Hunter Dos, but couldnt find the raw codes, only found the CB7+, when i try to convert it to raw and add it, i dont think it's working when i play the game
Do u need the special ps2 memory card transfer to copy to memory card? Dint know hiw to transfer stuff like that to it?
Hello. Where on my memory card do I place the wide screen text?
Whenever im about to start my game after choosing all desired cheats it stays on loading config forever :(
Yep me too. 😮
im sorry for the dumb question but i have a 2tb hdd on my ps2. how do i copy the folder from a the usb to the hdd. i cant figure it out to save my life
I can get this to work with my memory card but id much rather have it on my hard drive. I can load the app with my harddrive but cant get the cheats to show up. What am I forgetting?
Are these the same "decrypted codes" that OPL uses or can this program use the encrypted ones
I followed video to the letter but when i go to opl and start game none of the cheats work please help
I did everything just like in the video and tekken 5 cheats wont work (its ntsc-u version)
nevermind its working now
How to get it to work
Games list not showing up on cheat device for some reason i cant get anything to appear
Can I use cheats on an original authentic PS2 Disc game?
I got it up and running but now opl won’t read my MX4SIO games
Good.I NEED HELP SO AFTER MIXED ISO NEOGEO WHITH BOOT PS2 NEOGEO FOR MAKING ISO PS2 AND LUNCH WHITH OPL .THE GAME WORK GOOD BUT NO MISIK.SO WHY.!!!!
I downloaded it and did exactly what the video showed and I opened up cheat device to seeing nothing. I also have another problem with codebreaker too like the Cheats won’t work
I don't know why it doesn't show, I did make a usb follow up tutorial that bypasses black screen if that is what you have. Or try cheat device as alternative.
Do you have a video how to set up the cheat device as app so I don’t have to use launch the file ?
No, I don't have that kind of video. I believe it is the OPL daily build that has the app feature. If that is from ps2-home then I can't visit that site anymore, but I'm sure there are other videos online or google guides that show you how to setup ps2 apps. Once you understand the process, then cheat device should be no different from app shortcut standpoint.
If it is making a shortcut from FMCB menu for example, then yes I have a video on that.
I'm getting a red screen when I launch the game after selecting the cheats is there any way I can fix this pls
hey I'm having an issue I added cheats to a game and after I was done I tried saving my configuration and booting from mc0:boot/boot.elf but it's stuck any suggestions?
Make a github ticket, but I don't recall seeing this stuck issue
do you have to do this everytime you start the game?
Sir i have ps2 90004 model with matrix chip 5.0 but i dont know how i install cheats in my usb games pls tell me what can i do?
Run cheat device, select your cheats, start your game. I don't know how to add new cheats.
@@ProjectPhoenixMedia i allready have gen cht file if i copy in CHT folder then plug my pendrive in ps2 is cheats is work or not?
Will this work for any playstation 2 game?
I cant get this to work With Def Jam Fight for NY...
Does this also work With Games installed on the interna Hdd?
I haven't used this with that game specifically, not sure if that is a bug or if another work around. In general, I got this program to work with games running off of usb, so I think it should be fine too if a compatible game is running off of internal hdd.
Hi just want to ask if i can use this using from my external hard drive?
I don't see why not.
My only problem is i cant add it to my home screen funtuna broweser cuz it has buncha files along side it dont know how to add it there so i wont ulaunch it everytime i want it
Maybe add a shortcut to the cheat device on the ulaunchelf menu page.
Bang pas sya save di usb copy di memory kok sya coba di mass atas ga bsa bwah juga ke baca di memory save game pas ke boot layar tv merah bang it kenapa ya bang
I love this channel
On my freemcboot v 1.8 is not working it does not load just frezes but when i leave just licence an elf file it runs normal
Should add the entire package with database and the cheat device elf file. It should work
@@ProjectPhoenixMedia I did dat and it worked! thank you👍
Does this cheat device have cheat codes for teenage Mutant Ninja Turtles 2003 video game for PlayStation two
You'll have to check and if it doesn't maybe a way to add it manually
When i press mc0:Boot/Boot.Elf ,
It show me my memory card what i do please help
That is what I would expect it to do unless you have some other program renamed as Boot.Elf
@@ProjectPhoenixMedia what is the solution man please i really want to try god hand with crazy cheats 💔
hi i deasn't have any game list in that cheat device is just empty i using pcsx2 program why?
Not sure I only use this on real ps2
Hi if you have installed the games on to a hard drive installed in the back of the ps2 how do I use the cheats device?
Cheat device should ask you to browse and find the game in question.
I'm getting an error message when trying to launch my game through opl using cheat device. error: could not run the item. How do I fix this? i'm using a phat ps2
Do you have entire cheat device database on the memory card or the usb?
So in order to add codes, what is this using? I tried adding Gameshark codes for Dragon Ball Z: Budokai Tenkaichi 3 (which wasn't even pre-loadedon the list) and either 1. It freezes the Cheat Device when trying to save or it never loads up the game.
I'm not fiddled around with adding codes, not sure how to do it to be honest. Maybe check the github or ask a question there.
Hey man i am having some problems when i go to the game it stays on black screen and dosent load can you help me?
Did you find a solution?
I'll be trying this out since the codebreaker on my FMCB memory card just weirdly glitched its game menu and won't boot to UlaunchELF anymore.
Do I have to copy this to MC0 or I can just boot it from USB?
Either way is fine.
Do we have to copy the files to the memory card or can we use the HDD?
Either will work
Вот я всё делаю по видео но почему то чит коды на ре4 не работают не подскажите в чём дело?
What's the "Source Code" download for in the Cheat File/CODE BREAKER download?
I think it is for those who are devs and want to tinker? I never paid attention to it as a user
I am trying to get it working on Burnout Revenge which I am playing through SMB on my PS2. Everything goes well until I boot up the game and notice that none of the cheats I enabled actually seem to be enabled. I am not sure what I should do as I do not know what the problem is. I did see that Burnout Revenge had some weird long name within CheatDevice, but I assume the names of the games in CheatDevice won't have to identically match those of my PS2 games I have working through SMB?
I am not a hardcore cheat device user so I can't comment on what is going on here. Do other games work fine as a baseline?
@@ProjectPhoenixMedia Most games I have tried do work, for these games I use the same 'method' as for Burnout!
I get an opl error after selecting the cheats and starting game then from launchElf I start OPL : Error not found cheat file could you help me?
Is the database installed?
Does this work for jailbroken PS3 and PS4?
Please tell me about cheat device will work on ps2 with modbo 5
If you have a way to boot the .elf then yes.
Thanks, looks good. Does that device work with PAL codes too?
I can't comment if it does or not, give it a try. For some reason I thought one of the cheat programs is not compatible with PAL, but I'm not entirely sure as I'm mainly a ntsc user.
Is there a specific place this needs to be on the HDD? I have it with my other apps on it and it launches fine but none of the codes are there for games. If I launch it from my memory card or a USB device it works just fine.
I don't know off hand why it wouldn't work properly off the HDD assuming it has the database just like if running from memory card or usb. Not sure if that is a bug or requires a unique workaround for whatever reason. Maybe psx-place.com might have better idea as to what is going on
@@ProjectPhoenixMedia okay cool, I'll see what I can find over there. Worst case I'll just run it from my memory card with a shortcut. Thanks and appreciate the reply!
Hi, like your videos, question does this work for loading games from SMB?
I don't see why not
I don't know if I'm doing something wrong but when I try to load half-life cheats or any game for that matter or with cheats it just doesn't activate them it just plays the game normally from my USB
I don't know either if the cheats are looking for a specific game type or region? Oh well, at least you can play half life on pc and cheat there, right? Probably looks better and loads quicker too.
@@ProjectPhoenixMediaThis kept happening to me, I used an NTSC version of Shut Your Mouth and it worked like a charm. I hope this helps someone.
Dude there are some major games missing like God of war 2. And many useful cheats. When i tried to add game the entire cheat device games list was cut in half??
How about using cheat device?
Dude I'm talking about cheat device
Bro how to add cheats files in ps2 opl console from pcsx2 emulator cheats files ?? Any help?
That is outside my expertise, best to ask psx-scene.com forums
can some one help me ? i install cheat Device on my mmc but its always corrupted file after i install every time i check my mmc i say corrupted files but only cheat device corrupted
Not sure best to ask psx-scene forums
So I do everything according to the video, but for some reason the cheat codes on re4 do not work, tell me what's the matter?
Not sure why that is unless it needs like USA version of the game or specific version?
@@ProjectPhoenixMedia hmm I Dont Know And how to determine
Whe I load it and Choose game list it gives me a blank screen. Can't see game list. Any Idea why?
Is the database installed ?
@@ProjectPhoenixMedia when I download it I get the elf file and the cheat.text in zip. How do I install to make it work? I'm using rpsx2 1.7 beta
how to turn off cheats?
I think X
Hi... I'm trying to play this game Gradius iii & iv on OPL but it gives me black screen !!!
can you help please
I didn't have issues with those games with cheats and ps2 opl. Please make sure it works in opl first, maybe try defrag or turn off fragmentation check first.
@@ProjectPhoenixMedia Can you make a video explaining how to convert Bin/Cue games
I'm lost man, I need a video on how to put the Cheat Device file on my memory card from USB/Mass
Simplest explanation: Do you have a way to boot into ulaunchelf? Then you can use the program to copy the Cheat Device file to the memory card. This assumes you have a mod chip or softmodded ps2 to do this function
@@ProjectPhoenixMedia Yeah, soo I have a FreeMcboot memory card, and of course ulaunchelf, but everytime I try to copy the file to the memcard from mass, only the name "cheatdevice" gets copied, but not all the files. Next thing I know is I'll just try then copy the CheatDevice. Elf file, and that works and paste in the memory card,.... But.... The CheatDataBase does not copy over to the memory card, soo when I load up the CheatDevice, it opens, but no cheats 🤔
Hi , I love all your work for the PS2 .I Am now getting into my PS2 ,since the lock down in 2020. I say now because I am still learning. Got issues when I put the cheatdevice on the MC, the freeMcboot exploit does not load up. What am I doing wrong??
FMCB should load independent of what home-brew programs are or are not installed. Get your FMCB working first, and then you can choose to copy the cheat device to the memory card, or to usb instead.
I think your memory card was full. you can transfer the file in usb drive
Will codebreaker work for god of war 2 greatest hits version
No idea, give it a try or cheat device
I hope u can help me, i downloaded the cheat deivce and copy it to my hdd, once i opened it in ps2 i dont have the list of cheat please help
kindly run it again .if didnt work, run from usb instend.
@@soulkeeper47 I did that and nothing.. chest device opens but there is no game list
@@jonathanm9157 ya it happen , i formatted it then copy again it runs
It’s not working for me at all. I have a slim 75001 model
Why don’t I have a list of games like you?
Bro it works on my usb thumdrive but not in sata usb harddisk ?
I don't know why that is, maybe ps2 doesn't like certain usb devices.
CheatDevicePS2 doesn't work on SCPH-75004 and newer
you got to be kidding me! then what cheat app will work for 7 series
What about using it from hdd? How do I do the mapping?
I'd think if you can run the .elf from hard drive then that is a starting point
@@ProjectPhoenixMedia thanks, I don't need that anymore, I got it working straight off OPL menu, it's very convenient.
Would this be able to swap character models?
Not sure, this is like a game genie but for ps2.
Wait how did you do this
Bro pls do I still need codebreaker to do this or not? Pls respond to this comment
This is an alternative to codebreaker. Use what you wish.
Hey man is it possible to use a hard drive with a ps2 slim.
Never did it personally, but I think there is an IDE solder mod.
Cheat device opens but their isn’t any game list, what can I do?
Is the full database zip file thing also copied over correctly?
You need to you need to extract data ase .zip also to get game list give it a try
Is manhunt 2 on there? I’m trying to uncensor it
Not sure if a cheat can uncensored the game or not, sorry
Not working with PAL. "The bundled cheat database is for NTSC-region games only..."
edit:
I got myself "Tekken 5 (USA) /ID SLUS_210.59". Then selected a few cheats, but in the game everything is on standart.
Do you have to start the game through the program, or was it enough to activate the cheats?
You need to activate the cheats and then start the game second. That is what I did
They have cheat device for PAL also. Please watch th-cam.com/video/_gkSZKH7zBY/w-d-xo.html
Hey Man ...Can u give me a quick run down on how to make it work for funtuna and also make it appear on the interface
I am a real noob at this sort of stuff
Thanks 👍
I would think once you use funtuna to boot into ulaunchelf, then navigate to your mc0 or mass and run the cheat device elf file. Make sure the database is there, and then its like my video I would think for rest of the process.
@@ProjectPhoenixMedia thanks for the reply 👍
I use codebreaker but it launches elf instead of running off the disc
The codebreaker supplied is meant for elf files.
Is there anyway to play multi disc ps2 games with opl?
My recommendation is play through disc 1 or whatever disc, get the save file saved. Then start the 2nd disc and load off the save and continue. There are no ways I know of to use ingame shortcuts to switch discs like popstarter.
@@ProjectPhoenixMedia thank you!
@@ProjectPhoenixMedia
I have codebreakers pre version 3 and 3.3, 4, 5, 6, 7, 9.2, 9.3, 10.0 and 10.1 there ELFs work on ps2 free mcboot
Also i have Gameshark version 3.0 and 3.1 ELFs they work with free mcboot
Also cheat device is based on codebreaker but it has more games of codes on it that weren't in codebreaker 10.1
Does anyone of you know how I can use Cheat Devise on a PS2 Fat with HDD and the current OPL
install FreeMcBoot into a USB Flash Drive and plug it into your PS2
I tried this but the cheats didn't work. Am I missing something?
Maybe the cheats selected has to work with a certain game/region is my guess.
only .elf file should be copied or whole folder?
I do whole thing since it has the database as well.
can you have a link of .elf?
@@nobitzki1410 it's in discription i guess
How to add cheat using pc or any other options
Outside my area of expertise unfortunately, check the github for info.
No cheats showed up. Im on FMCB 1.94
Was cheat device copied over properly with the database? I am using a newer FMCB and I don't recall no cheats showing.
Mr Einstein for the PS2, Thanks Brotha! "TASKS REQUEST" I Wonder if IT WOULD BE POSSIBLE to Find the Cheats code(s) for PS2 Lord of the Rings The Two Towers? Lord of the Rings Return of the King?, Rapala ProFishing? Mark Davis Pao Bass Challenge? that would "UNLOCK EVERTYHING" Hmmm, Hmmm (Rubbing my Chin?)
Sir it's a request can u please make a video on how to play games on ps3 with usb
ps2 games on ps3 must be installed to internal hard drive, I have a video on that topic already. There is no other way.