👍 If you found this video helpful, make sure to smash that "LIKE" button and "SUBSCRIBE" for a steady stream of DIY knowledge! Stay empowered to tackle any project around your home, car, or pool with confidence. Let's get hands-on and make life easier together! www.youtube.com/@diymanual?sub_confirmation=1 🏡🚗🏊♂ #DIYLife #SubscribeForMoreDIYTips
You can use regular rope, bungee cord or velcro. To remove the air out of the hose, you will need to open the small screw from the filter and the move the hoses up and down to fill all the air gap with water as the water is coming out of the filter cover screw. Hope this help.
How did you manage to pull out the u support bars on the otherside of the pool? It looks like its literally up against the brick wall. It doesn't look like there's any room on the otherside of the pool for the support bars to expand outwards.
@@Superman-xr1oh I arrange them before I fill it up with water. It is tight but I can still go in to the side to make sure it is properly set. The top frame right now is 18 inches from the wall and the foot is touching the wall.
@@Superman-xr1oh As long as you have a level or close to level transition to the lawn this size pool will work. Else, you can go with a 10 ft wide pool. Just make sure that you position the pool properly before adding water. Once You add 5 gallon in it you wont be able to move it without twisting the vinyl.
👍 If you found this video helpful, make sure to smash that "LIKE" button and "SUBSCRIBE" for a steady stream of DIY knowledge! Stay empowered to tackle any project around your home, car, or pool with confidence. Let's get hands-on and make life easier together! www.youtube.com/@diymanual?sub_confirmation=1
🏡🚗🏊♂ #DIYLife #SubscribeForMoreDIYTips
How did you tie up your pool hoses? I think we need to tie ours to keep air out.
You can use regular rope, bungee cord or velcro. To remove the air out of the hose, you will need to open the small screw from the filter and the move the hoses up and down to fill all the air gap with water as the water is coming out of the filter cover screw. Hope this help.
How long did it take you to assemble your above ground pool and do you drain it after the pool season or just cover it for winter?
How did you manage to pull out the u support bars on the otherside of the pool? It looks like its literally up against the brick wall. It doesn't look like there's any room on the otherside of the pool for the support bars to expand outwards.
@@Superman-xr1oh I arrange them before I fill it up with water. It is tight but I can still go in to the side to make sure it is properly set.
The top frame right now is 18 inches from the wall and the foot is touching the wall.
@@diymanualThanks! I have a very similar yard width to yours. From my brick wall to the lawn is about 13 feet and 6 inches. So it's pretty close.
@@Superman-xr1oh As long as you have a level or close to level transition to the lawn this size pool will work. Else, you can go with a 10 ft wide pool.
Just make sure that you position the pool properly before adding water. Once You add 5 gallon in it you wont be able to move it without twisting the vinyl.
Bruh😂😂😂😂
Don't know what that means but thanks for the comment.