Airgun Soda bottle tune results Winchester 1100S
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Shoulda' done a before and after video but it never dawned on me until I was finished. Next time.
This is a short video to discuss the results of a simple sleeve inside the piston as well as around the spring guide and top hat of a Winchester 1100S air rifle. Completely cancelled cocking noise and mainspring vibration.
![[TH] 2024 PMSL SEA W2D5 | Fall | พลาดวันนี้ จะต้องเสียใจ](http://i.ytimg.com/vi/A5-Cuo12p6A/mqdefault.jpg)
I bought the Daisy version of this, I absolutely love it! From a rest, I can hit a 1” spinner at 50 yards open sights, about 1 out of 5 shots. After about 500 shots it has smoothed out quite a bit. I have a tune in a tube on the way, and I’m hoping it takes some of the twang out. I don’t have a spring press yet to do the piston sleeve mod. My PCP is getting dusty with my new love for springers.
Yes, the Daisy 1100S is the same rifle as the Winchester 1100S. It's really astonishing that they can sell this gun so cheap. It's really not a bad gun.
You don't need a spring press to disassemble or reassemble that rifle just so you know. The only problem you may run into is that the trigger is a little bit tricky and has to be partially disassembled in order to remove the main spring and piston.
Although I've never tried it I hear that the tune and a tube works pretty darn well. Thanks so much for watching.
Where can i buy a tune in a tube?
@@GluteusMax777 I got mine on Amazon.
@@cyclepath78 Thanks
Cool video...The pellets seem super tight to load in mine...Crosman Piranha 10.5gr
Just bought it yesterday. It's a heavy rifle...but should do good.
Congratulations on the new rifle!
Thanks for watching.
Nice! Take off the butt pad and fill it with duct putty. It makes a hollow stock feel great(ish).
LOL at "great(ish). Thanks for the tip and thanks for watching.
Sounds good when shoot. Nice gun . Congratulations
Thank you, and thanks for watching, my friend.
Good job you did there. Do not understand why the factory do not put a Ptfe/teflon sleeve in it.
Springbuzz is a peeve of mine. I suppose it's possible that most people aren't bothered by it. Thanks for the kudos and thanks for watching.
it cost them an extra penny
@@TuttleScott Truth...
@@TuttleScott Yes i agree but even when it is made in China, Winchester has it's name on it.
@@razor1962 Thanks for the video. I have tuned all my HW rifles. I don't like xtra noises that can be fixed very easy. All the best from Sweden.
Got mine for 38 dollars. Great review!
That's a great buy! Thanks for watching.
Very nice
Thanks very much and thanks for watching.
I love the content . I have liked and subscribed .
Thank you so much. Welcome aboard!
@@razor1962 : Thank You,Sir. Your love for quality break barrels ranging from the lowest priced to that of top dollar range , is much like My own. Looking forward to seeing more videos from You
Very cool! Good job. Put your lapel mic on the other side.
Will do. I am using the one that you recommended. Thanks!
Do you have a link or post a video on how to do this mod .
Thank you .
Sorry, no link. My Gamo Varmint home tune video shows how to make a metal sleeve and guide shim. You should be able to apply the same technique to virtually any noisy springer.
th-cam.com/video/HgcpiiQ4tZQ/w-d-xo.html
Thanks for watching.
I have no idea about what you’re talking about but it all sounds right to me! Lol hey my good friend!! What a great video and very informative make sure you say subscribe and like so you can get more subscribers. I’ll be by the shop soon gotta bring my snow blower lol
Looking forward to seeing you.
Did you do any trigger work on yours? The way you are pulling the trigger I would assume you have if it was at all like mine as it takes three men and a boy to get the trigger past the second wall!!
Good eye Doug. There's a trigger mod out there in the airgun forums. It requires q set screw installation under the rear stock bolt. The screw acts directly upon the sear and can be adjusted somewhat. Be careful however, if adjusted too far, the gun becomes unsafe. It makes the trigger more manageable but not great.
Thanks for watching.
Hi. Did yours come with a scope or did you add it? Are there rails already provided for scope installation? If so, what scope do you recommend?
There was no scope with the rifle. The rifle is equipped with scope groves as well as a built in scope stop. Unfortunately, if you don't spring for at least decent glass, you're just throwing your money away. That means that the scope will cost about as much ss the rifle. Still, a decent scope makes shooting the rifle so much more precise. I'd recommend a Hammers 3-9x32
Hammers 3-9x32AO Air Rifle Scope with One-Piece Mount,Black a.co/d/iLqQZNg
It's a very good scope considering it's price point and it comes with a one piece mount.
Thanks for watching my friend.
Thanks for replying. Good videos. Keep the good stuff coming!
Hi, I was wondering how to take the front sight off this rifle, I tried but am afraid of breaking it.
The front site is a friction fit over the knurled end of the barrel. Removing it will most certainly make reinstalling it difficult as the plastic will most likely strip out. I have no plans to reinstall my front sight so it wasn't a consideration. Thanks for watching.
@@razor1962 Alright, thank you very much, also, great videos, love them :)
I watched your tuning on the Varmint, is this the same process only with a soda bottle instead of the metal from a can? I've got both rifles and am thinking of starting with the 1101 first. One last question, what scope are you using on the 1100? I've been running iron sites. Thanks, good videos.
The soda bottle technique is very similar to the aerosol can technique. Check out this video where I show how to make a piston sleeve from a soda bottle.
th-cam.com/video/RKicK5xJuwc/w-d-xo.html
The scope is a 3-9 UTG Bug Buster. They're available on Amazon.
Thanks so much for watching, my friend.
How far would it kill small game?
Out to 50 yards if the shooter can make the shot. Chinese guns will often vary greatly in accuracy. Your gun may not be capable of the kind of accuracy needed to shoot out to that distance.
I sure do wish our Walmart would put it on sale like that. Its 100.00. It by far the the worse Walmart i have ever seen
A quick internet search turned up this:
www.cheaperthandirt.com/daisy-winchester-model-1100s-.177-caliber-break-barrel-air-rifle-19.5-barrel-1100-fps-single-shot-fo-sights-polymer-stock-blued-finish/FC-039256211007.html
What is the true FPS, with hobby pellet?
Don't know
now is 50 box
Sorry my friend. I don't understand. Thanks for watching.