What's Wrong With This 1967 Dodge Charger Big Block 383? When Bad Parts And Builders' Mistakes Mix
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2025
- In this video: Diagnosing cam timing problems, carburetor tuning, adjusting Holley float levels, distributor timing and recurving, oil pump shaft adjustment technique, new part failures and assembly errors, setting adjustable rocker arms on a Mopar, setting ride height, torsion bar adjustment, gravity bleeding brakes, and so much more...
This 1967 Dodge Charger has a brand new rebuilt 383 big block. It has fancy aluminum heads. Everything in, on and around this engine is brand new... so why will it barely run? This crazy problem had me scratching my head, chasing my tail for hours, and strongly reconsidering my life choices - until it finally dawned on me that the builder of the engine had made a mild tactical error. Let's see if we can get to the bottom of this nightmare.
I must be getting old - the moment I first heard that thing crank up, I said to the wife "cam's not degreed right".
She replied - well, she pretty much ignores me when I'm watching these videos, so she auto-replied "yes, dear."
She's lived with a full-blown Mopar guy for decades now - she's well used to it.
I enjoyed the video muchly as always, Jamie. Thanks for the effort!
- Ed on the Ridge
Haaahaha. Nice. I have never run into this before, so it was an important lesson.
I can always count on Ed on the Ridge to appear on great automotive channels and troubleshoot with precision. Merry Christmas, Ed . 👍
@@shaunclifton5281 You're too kind. Merry Christmas and God bless you and yours! - Ed
I agree with you.
Experience is something you get just after you need it. I'm totally using that!
It’s a damn good one. Haha.
Finally a 67 gets some love. I know I am not with the majority but the 67 is frickin awesome. And that car is also awesome. 👍🇺🇸
I love them! But I made my choice between the ‘66 and ‘68… and I’d make it again. I need a bigger garage. Haha.
@@DeadDodgeGarage just watching 67 d0dge charger with crappy timing.. me thought it was cam timing. it was.. any 3 yr old knows, its dot to dot, cos thats all they do at kindy.. fk..
@@DeadDodgeGarage who.. built that engine.. if the timings out, id be checking the con rod bolts.. everything...
Love the 67 Chargers
Whoever assembled the engine neglected to see the forest for the trees... Nice diag, Jamie.
This is a good one. It shows the amount of patience required to be a good mechanic. So many people would be throwing wrenches and giving up with all that you had to chase down! Good on ya Jamie.
You just saved that engines life greatness and gratitude Sir .
I knew WAY UP FRONT that the cam was too far advanced... Back in the late 80's, when I had my shop in Upstate, NY. I had a buddy/customer who had his engine machined by a pro and he brought it all home and built it. When he fired it up, I started getting those, WTF COULD I HAVE DONE WRONG, calls.. Since I had paying jobs overfilling my shop, I wasn't completely paying attention to all he was saying and told him to bring it by on Saturday. (Shop was closed on weekends, so I figured it would be a great time to figure it out without the phone ringing off the hook.. As soon as he fired it up on the trailer, I knew exactly what he had done. When i questioned him about advancing the cam, he said: "I advanced it 4*s". After rolling it into the shop and making some fast checks on the typical impairments, I pulled out a timing set and put it flat on the table and asked him to show me how he advanced the cam. I know he doesn't OWN a degreeing wheel, so as I expected, he said: "I lined up the dots and then moved it 4 teeth in advance"..... I asked him how many teeth were on the cam gear on the bench and he gave me that, (OH FUCK) look..... So we spent a few hours R&Ring the radiator, water pump, balancer ,brackets ,etc, and NO, I did not break out my degreeing wheel, but once back together it ran like a champ....
Yep… this was a new one for me. Definitely a good learning experience. I own a degree wheel now, but have never had one before. I have always just installed them dot to dot and have never had a problem. I recently learned how to check overlap with a straight edge (as somewhat demonstrated in this video) so now I’m not sure I need the degree wheel. Haha.
Hahahahahahhaa..... I have owned a degreeing wheel for about 40 years and used it a lot when I was first building drag engines and hot street engines, but I soon figured out that the cam manufacturers were pretty good about getting it right. It's another thing when you want to advance a cam and you are really more than a weekend drag racer, but I'll tell you, I have not touched that wheel since I hung it on my new shops wall in 2009'..
Keep them coming, buddy. I truly enjoy your videos and sense of humor.. That humor is something we ALLLLLLL NEED these days..
a degree wheel is only really good for checking reground cams from personal experience. im not sure why anyone would screw with cam timing if you order a cam buy what you want install it straight up and if you dont like it buy a few sets of pushrods and rockers before tearing into it !
Because most often, people buy cams off the shelf. @@stevenbean9706
Look at that tire! Woa!
As one hot rod mechanic to another, as soon as I see a scotch lock / quick splice I get concerned. Because where there's one wiring bodge, there's usually more.
Really enjoying your carb content.
Totally agree - and wish I’d had time to fix all that.
No kidding! I saw that and thought 'home of the one dollar wire fire!'
Beautiful Charger! Glad it found the right person for tuning!👍
Awesome job! You were right about my electrical issues! It was the bulkhead connection at the firewall!
Awesome! Glad you got it figured.
It seems like parts have just gotten worse over the last decade or so. What a sweet looking ride that thing is.Great job making it a runner again dude!
Nice job! There's nothing like watching an engine go from running very poorly, to running pretty well. I am always amazed at how badly things can get assembled in an otherwise nicely built engine. Didn't they read the directions? I know, dumb question!
Anyway, I don't dig into engines nearly as much as you do, but when I do, I make it a point to really take my time and making damn sure I am doing it right, and keeping things very clean at all times. That approach has always served me well, even if it takes more time (which usually saves a lot of time in the end by avoiding major problems).
👍
You are a Master Sir! It’s impressive watching you work and reason.
I couldn’t agree more! Well done Jamie.
So many little issues add up to major problems
66 & 67 is amazing years from chargers
Thank you for educating people how to get the intermediate shaft properly indexed to factory specs. I see it off a few teeth way too often in the showfield.
Thanks for taking us on your trouble-shooting journey. Twas a good ride, if not alot of busy-work for you.
Interesting mix of engine build errors-customer should be happy with the outcome.
Didn't know all the differences between the '66 & '67 Chargers.
He’s very happy!
Hope the owner truly understands that you’re the man Jamie!
He seemed really excited and thankful! Super cool guy. He did his homework on me before bringing it out here. I would too. Haha.
@stannelson2582 I love it that you are into classic cars and the Buffalo Sabres! Go Sabres and go Mopar!
That is one beautiful Charger! You sure went thru a lot finding out what the main problem was or should I say problems were. Great job, really enjoyed the process.
I live in a small town of about 3000 people, and surprisingly there are 2 of the 66-67 Chargers here.
Very enjoyable to watch. Great Job
OMG Jamie, you are the master! This is why whenever I locate the right 67 Barracuda fastback, we will meet at your end of the country to have you make everything right. Thank you once more for sharing your expertise with us, brother.
Sounds awesome! That’s the best Barracuda. Haha. Thanks!
Scotch locks and wire nuts everywhere and it has weird electrical problems you say? That’s weird. On a serious note, that car has soooo much potential. It just needs about a month of Jamie’s time to work out all of the bugs.
I wish I’d had the time to fix all that, but the entire second day was time I didn’t really have to spend on the project. I did verify that 12v was getting through that mess, and it was. Outside of those tagged on circuits, the rest of the wiring is in surprisingly good shape.
Jamie you are a master!
Really Great video! What a GORGEOUS car, one that is seldom seen or appreciated. This is one in really NICE condition! Great job getting it sorted out for your friend. A lot of little annoying things left to complete, but overall, what a gorgeous 1967 Charger and I agree with you about the interior, SO Cool and Nice! Big cam equals low vacuum, and might be the reason the power brake booster is having issues. He would be happier with a stock 383 HP spec cam in it.
Nice catch Jamie, most people won't think the cam timing was wrong on a brand new engine.
Can't believe you only have 22000 subscribers! Your content is awesome!
Well I’m working pretty hard on getting that number up. Haha. Thank you!
The fast back rear and full length drive shaft hump are pretty cool. Like a show room race car. Great you got the engine sorted out.
Another fantastic job Jamie. Bravisimo! And my 66 sport fury had the same shifter and console minus the padded top. My girlfriend back in 76 cracked the rear part of the console with her foot that you mentioned was usually cracked. I will just let you imagine what she could have been doing. Mopars rule man !
Haaahaha. Nice. Yes, that console was used in C bodies in that timeframe as well. Pretty cool.
I had a 66 Coronet with full console. No room in back for repurposing back seat, however, the coolness factor of my car led to other locational adjustments too.
Same
Wow, i loved watching this, it brought me back to my 20's. God, the amount of times i went through processes like this and i hate those Holley carbs too, all of those leaks whenever you touch anything on them, put an Edlebrock on it and get rid of that thing😢
That’s basically what I said. Haha. Thanks!
The Holleys will go faster at the strip but if you're just wanting a driver and criuser, definitely the Edelbrock. The AVS2 is a real nice street carb.
What a bizarre issue. Was that the engine builders first engine? More and more I am a big fan of using factory parts and keeping engines much closer to stock than modified on a street driven cruiser. I understand changes for a dedicated race car. I'm impressed with your tenacity to work through the issues, even when it is an obscure and bizarre problem.
That’s exactly how I feel about it. Race cars are one thing. For normal cars, more stock is more better. No… it was apparently an experienced builder who clearly didn’t know Mopar and may or may not have been having a bad day / week / six months.
@@DeadDodgeGarageunless original parts are in the thousands of dollars... many parts are better to be original but you just said poly bushings which weren't used back then. My car rides and handles well due to aftermarket modifications. The original handled like a turd. My engine runs far better too thanks to aftermarket headers, super boosters, and transmission mods. A car like mine rides and brakes like a dream, unlike that stock car with drum brakes and primitive blocky leaf springs. Eaton Detroit springs redoes leaf springs in the most amazing ways tapering each leaf. I am still amazed at this mod.
I don’t think the rebuilder had much experience with 383 MOPAR engines eventhough he was a good engine repairer. This is why you get stupid mistakes which stop the car running correctly. You would have to start from scratch, fix the mistakes the rebuilder made, to get the car running to its tip-top performance.
@@DeadDodgeGarageexactly!!
At most, a light RV cam
Even that creates tricky driving, esp necessary brake vacuum
Nice video...👍 Cool Car.... amazing it was starting and running at All ... exhaust needs attention....
Don't have a Dodge, but loved your video. Super narration. You did very well. Thank you
Thank you!
I’m exhausted after watching this. It’s remarkable the knowledge, spare parts and effort you put into this vintage car. The look and style of these vintage cars is really cool and I get the desire to have one. My experience as an owner of new non-performance cars in the late 1960’s still haunt me.
That seemed like a nightmare in reality! Glad you were able to find the majority of the issues! Sounds really good!
Love the marching band at the end. Commitment!😂
Awesome! Great job wrenching. I learn a lot from some of the smallest pointers
I try to pack these videos full of diagnostic processes and useful tips. I hope they are actually useful to people. Haha.
Brings back memories. I had a 66. I did some work on it. Dropped in a 440 Super Commando with a mild street cam and had a 2:97 posi rear end and a reworked automatic which switched it to a manual shift. I never found top end but it would bury the needle. I really miss it.
Nice video, I had a 66 charger with a 383 4 speed and we won lots of trophies at Pgh International Speedway! Fun car on the street also. 👍🏻
You keep impressing me with your knowledge keep up the good work.
tell the owner of the car if he doesn't want it I will give it a good home in Montana!!
These were the cars that started me into the hobby when I was only 10 years old! My neighbor brought home a brand new HEMI Charger & it blew me away! I'd never seen anything like it! He eventually turned it into a drag car. He was a Mopar guy. He had a 67 Coronet R/T for a tow vehicle! Used it to pull the Charger. Sold the R/T to a buddy of his, then bought a 69 Charger R/T! I had the Mopar bug early!!👍
Great diagnostic video!!! DDG to the rescue yet again!
Dirty Dan,,knows his transmissions,,I don't care what brand,,a transmission that clean in a running driving car,,that's impressive!!!
Awesome. Reminded me of my issues when I first got my 67. Like how you explained the high points on the 66 and 67 Chargers and engines. Your patient mechanic skills show exactly what we all need when working on our cars.
First Gen Charger Content? My heart! I've got 16 months bringing one back to life (Last redgo'ed 04/'86, now its 95% operational), and have utilized tons of your advice across many videos! My dash lights even work! Working on fine tuning my little 318 now, and a 383 swap next year. Cheers DDG!
Love the content.
I had a 67 in 1991-93 (daily driver). They need really Big Rear tires! I never ever seen the dash Guages glowing
Hello from Wisconsin
The gauges worked in my ‘66 when I was done with it - mostly…
I don't even like Mopar, but watched the whole thing, cause of humor, didn't want to miss a joke. When this car came out I was 13 & thought the full console w 4 buckets was the coolest thing in a car. Might get 1 just for that feature
Thanks for the shout out my man! That is a typical ford engine builder mistake. Not being funny, that's actually true. We're all human. I would have possibly done the same thing if I had multiple decisions on the crank cam gear.
I will say that you are 100% spot on as always and I am surprised that you didn't adjust the headlights and finish the job. You being as particular as you are. Good morning and great day to you all.
I took it on that quick test drive, and he arrived to pick it up 20 minutes later. Just a little tight on time! There is plenty of meat left on the bone there fit him to sort through. But there was definitely more I could’ve done. Thank you!
Great sense of Ha ha regarding your commenting on the the rear seats lighter and ashtray.
"You know. So your kid's can light their cigarettes or whatever."
😆😅🤣😂
This is the most detailed showing I've ever seen of a 67 charger
Great Episode! Thanks!😀
Your videos are like Clint Eastwood movies in that , nearly all of the dialog is quotable . My particular favorite in this installment is " Not big cam , cold blooded bad ... just regular bad . " 👍
I'm very proud of that. Haha. I have at least a couple commenters who often pick out the best lines in the comments. Thank you.
Weird, I was sure I commented on this but apparently not. Anyhoo, excellent job as always man. I know they aren't currently working, but those electroluminescent gauges are some of the nicest ever installed in any car.
They are amazing. Fixing them is essential - and definitely part of the owner’s plan.
Best MOPAR interior ever 👍🏻Man if I owned that Chargers keep it factory 4 barrel 383 the way Ma MOPAR made it . But with a good breathing exhaust. Way less headaches .👍🏻💯%🇦🇺⛽️.
Yes I think that’s really what the owner wanted. He was led astray by a builder, who was sure he knew the way to go…
I had red '66 back in' 71. I picked up a red '67 a few months later that was stuffed in the rear. I swapped the 383 4-speed from the' 67 to the '66.
My brother still has it. I sold my '70 'Cuda to buy it. Love these cars!
What a mission entertaining to watch great job looks and sounds beautiful
I enjoyed this video. Doing my first cam swap, and trying to learn about timing. Thanks 🦶🏾
My old '63 Imperial Le Baron had the electroluminex=scent lighting. That is a coating on a wire that when heated emitted light. The only way it worked is with AC though and that means there is a vacuum tube converter somewhere that is probably worn out and the coating chips off too and ruins everything. I set the distributor up on my '68 Fury III with 383. Ran the vacuum advance canister and changed out one weight and one spring to have all advance in by 3k rpm. Starting at 8 degrees initial and all advance in was 34 degrees. Ran fantastic with 18mpg in the city, 20mpg on the highway, and beat '74 emission standards. Screw Chrysler's lean burn crap. 0-60 was in 6.3 secs. I was a happy camper.
It is not a coated wire. The plates and needles glow. I don’t know about the earlier Chryslers that used EL, but I am fairly certain they are the same. And yes, they work on ~230v AC, which is produced by a converter box - but no vacuum tubes are involved.
@@DeadDodgeGarage That's what the earlier ones ran on as I had it and couldn't get it fixed. No, they weren't the same. They only had the same name. If that doesn't fit in with what you know I wish I had that '63 Imperial LeBaron back to show you. My loss and one that I really regret.
@@Friedbrain11 No, they are actually exactly the same. Perhaps that is how it was explained to you, but that isn't how the electroluminescent system worked. And incidentally, those early cars use the same type of power pack as the Chargers. That is definitely unfortunate. Those cars have an incredible amount of character.
I was a real treat watching this episode. A knowledgeable tech doing honest to goodness diagnostics based on years of experience. Distributor/ oil pump drive line up ( with Chevy’s if that rotor wasn’t pointing at the left headlight, I knew a rookie had set it up.
I tried to guess the problem when you first started ( I thought valve lash) but you found tons more. It was skills like this that made me very popular in my circle.
I still get crap for my zero lash valve adjustments but never floated any and never clacked.
It’s really cool how you talk to your camera and share your thoughts.
I’m an old Chevy tech and lived to outrun any Ford or Mopar and usually did. I won’t lie I did run into an occasional Ford or Mopar guy that had my leg shaking at the end of a street race, ( not many) but that Charger was nice and so was your soul search for what was done wrong.
Thanks for the great content!
Thank you! I am running zero lash in my 360 with no issues. But I have heard that with oil through lifters and pushrods, a bit of preload is important for top end oil pressure regulation inside the lifter, and also that zero lash can potentially lead to the lifter piston retaining clips removing themselves. I think a half turn of preload is a good compromise, and am planning to run with that moving forward.
Geesh, what a challenge. No solid ground to work from anywhere and everywhere you look nothing makes any sense. Well done on the perseverance and persistence front.
Great episode, I love the diagnosing and trouble shooting vids. As long as there is success.
My shop used to have a water ingress problem like yours. I cut a length of 3/4 inch hardwood about 4 inches wide with a 45 degree bevel on both sides and glued it to the floor in the doorway with construction adhesive. Its been there 10 years now and still works, I slap some paint on it every few years so it looks kinda pretty...You will likely have to wait for drier weather though. All the best from rainy Vancouver Island.
That’s a great idea. It would definitely help at the door there. Ken said he had used a strip of plywood there and it worked fairly well. Unfortunately, there are also other spots where water runs under the wall… this place needs some help at some point. That concrete apron needs to be busted out and redone. And a roof would be nice. And… and… I just want to fix cars. Haha.
@@DeadDodgeGarage Last winter one of the underground drains plugged , Since its a shared drain with the gutters I had a lake in the shop from one of the floor drains . It was one of the big downpours, Laying under the old Mercury in two inches of cold water trying to snake out the plug. It was fun.
@@DeadDodgeGarageI had to grind down concrete outside of door to slope away from building
What's not to like about a red mopar. Beautiful car
Man, those are nice cars. I remember as a little kid seeing a 66, the same color red with red interior in a driveway on the street behind me. I remember looking it over and being blown away by the front and rear bucket seat setup with the full length console. It made a lasting impression on me
Impressive troubleshooting skills displayed here.
What a beautiful car. Love the first gen Chargers.
Yessir, with that much cam, she'll want plenty of advance at idle. My 402 chevy (with a similar size cam, just based on the sound) wants about 32 at idle. You bet your bippy I didn't get there with base timing! Vacuum advance can that is 'fully deployed' about 2in less than the engine produces at idle is what I've always heard and done. You have to shop around to get the can you need, but the end result is worth it. Idle is good and steady, not gassy, doesn't overheat. Also produces plenty of vacuum to run those pesky brake boosters!
So Sweet...it needed you Jaime....I love these 1st Gen Chargers.
Good video and awesome troubleshooting.. As a side note, maybe make the owner aware that scotchlocks and wire nuts almost always equate to electrical problems. The visible evidence of those being in existence under the hood make me question the electrical integrity of what may be going on within the dash panel. I've been cutting those out of cars and trucks since I was 15. I'm 55 now and still correcting electrical problems on cars and trucks by removing/undoing this sort of thing.
I did. It was just about the first thing I said to him when we opened the hood. He was making temporary connections to find a suitable power feed for the choke and ignition box. The rest of the wiring is unmolested, and in remarkably good shape. I would’ve redone that stuff if I had a bit more time.
I have used scotch locks, wire nuts and even twisting wires together in the past. They were always for temporary or emergency repairs. Because they generally don’t last or become troublesome. Like it or not, they always become a temporary repair because they almost always fail again and have to be done over at some point. But they are quick and dirty and can get you by until you can do it right. Been there done that. Sometimes, crap repairs are better than no repairs. You do what you gotta do to get rolling again.
@@americanrambler4972 I agree with that, they are quick and easy. I've twisted wires together myself to get home. But these types of repairs definitely must be considered temporary. I have been paid to debug electrical systems on cars and boats and have removed many of these and other temporary fixes that owners have done.
@@madbrax5184I think solder & shrink tube is the best, never doubt connection later
My dad picked up a new 1966 Charger 383-4 barrel when I was 11 yrs. It was a really cool car with a bunch of room in back with the seats down.
Dad ran the crap out of it and it had a really cool and loud intake sound when floored, I mean real loud.
Love your video. I usually would have pulled the valve cover much quicker. Certainly by the time I saw the distributor was in wrong. Good lesson for the future. (I have a long story, but basically I learned that lesson the same time I learned that Chevys will run 180 out).
Best troubleshooting video I've seen in a long time. Don't know what you charged for this but I get the feeling it's not enough! It's been my experience that all Good experience is based on Bad experience. You got no give up! Well done.
I did make him a good deal on this job - I had a feeling he might need me again down the road, and I wanted to stay friends. Haha. Thank you!
@@DeadDodgeGaragegood friends are better than $
Job well done 👍🏻
Love the interior of the 66 - 67 but never liked the body style until 68 and up
Coming in behind somebody else is always an adventure, you can't take anything for granted. When I bought my '80 Corvette there was a laundry list of new parts that were put on it as a selling point: brakes, strut rods, and carburetor to name a few. The brakes were dragging on all 4 wheels and had to be shimmed and were not properly bled. The strut rods were loose and the rear camber was insane, and the carb tuning was completely screwed up, float was too high and idle mixture was insanely rich. It only ran when I looked at it because there were so many vacuum leaks it cancelled out the carb dumping fuel. The top end had been gone through but they didn't lap the new valves, I had massive intake valve leaks on 1 and 3 so they were both dead misses at idle, and the rocker adjustment was abhorrent, some way too tight, some clattering. I wanted something to wrench on though, and it did not disappoint in that respect.
I'm a first timer here. When I saw this thumbnail my heart skipped a beat!! A red, 67 charger w/black interior, 383 4bbl, 4 bucket seats and a column shift lever was my first car out of high school in 1970! $2400, small down pmt, $67/month for 3 years! I loved that car! I put NASCAR steel wheels w/the biggest tires that would fit on it! 1 extra leaf in the rear spring pack and traction bars. Then removed traction bars and installed ex-heavy duty sway bars F&R. It was a 4:11 posi from the factory, and ran great!! My Mother, who was 5'1" tall, would borrow it to go shopping. The small town cop told me to warn her about unsafe starts, or "burning rubber" as we say. I did, then she did again and got a ticket. She couldn't reach the gas and punched it with her toe. Burning rubber. LOL Judge tossed it out! The front breaks were the first thing I looked for here, while shouting in the mic "cam chain, cam chain". LOL One Saturday night while playing with the boys I lightly tapped the breaks at a little over 100 MPH to slow down. The right front drum break grabbed tight and wouldn't let go, over the 15 foot embankment I went, and according to the state police, rolled 18 times, coming to rest upside down in a dry creek bed! Seat belt on, and the only reason I'm writing this now! No broken glass!! Not 1 square inch on the car without a dent, ding, crush, scrape or mark!! Today, I'm 71, have a 2500HD Silverado loaded, and a 2013 (last round tail light) Corvette, 6.2L 430 hp, 6 speed manual. It's faster, safer, handles way better, rides better and gets 22-23 MPG w/a light right foot! LOL If you got this far, thanks for reading my dumb story, everything is very true! My Mom would have loved it!! 8) Peace --gary
😮 wow! That’s insane. Glad you made it. Thanks for sharing.
I just wet myself! 😁👍👍👍👍👍👍👍👍👍👍 Had a '67 myself. Ford Fairlane to. Nothing but memories.................
I appreciate the content, from someone who really knows what they're doing, just found your channel,you've got a new sub
I fondly remember the 67 Charger. I was working at a Chrysler dealership. Remember doing a PDI, pre-delivery inspection on these very same cars. Back in the day. They sold new for $3100 Thanks, the Old school guy
I have a 67 and and your video's explained a lot well done Thank you for the information!
Love any content with first Gen Chargers!!!
Wow. I've never seen an original Pertronix Ignitor fail. I've had the same one in my Javelin since 2002. In my Hornet since 2015.... these cars sit for months at a time and once they get fuel - fire right up.
Always loved the look of first gen Chargers. Used to see a Hemi Charger almost every day when I worked in downtown Calgary in the mid 1970's
I've always found it's much harder to diagnose other peoples screw-ups that actual broken stuff. The wiring in that car is an abomination, Scotch locks and wire nuts?, oh my! Nice work on the running part, I can't understand why guys install cams like that for street use. Just because it sounds bad-ass, doesn't mean it is.
That's why some new cars have factory sound tracks play thru the stereos that make exhaust noise
Man that was a hand full of problems . Someone didn't do their home work planning the engine build . Great job of getting the Charger running and a lot better .
Very much enjoyed the video! First time viewers to your channel
Thank you!
Very informative as well as interesting. Thank you.
Holleys are nice when you dial them in. If not dialed in they can be a nightmare.
I love the '66 - '67 Chargers and wanted one when I was a teenager. However, I was dirt poor and could only look at them. I did get my modern Charger 10 years ago which got its shape from the '66. The owner of this one is really lucky.
You are the dodge sorcerer. Magic every time. Sounds 👍
Reminds me of the time I saw a crankgear clocked out like that,,once! Back in NAM 68!!!!
The cam timing thing is when a chevy guy builds a Mopar, I agree way to many hi-po parts he didn't need for a daily driver
Apparently the keyway faces upwards on Fords. I wouldn’t know… haha
I'm not fond of the overall body style, although certain features are really cool like the tail panel. You're absolutely right - the 1G Charger interior is a masterpiece of industrial art. Those gauges are absolutely beautiful especially at night. Maybe I'll have one some day if I can get through my other projects.
I wondered early on if the alignment of the crank and cam were right. Good fixes on this. Interesting to watch the process on an old car.
Wow I really like these interiors.
Me too. They are just awesome.
Don't mind my gushing but you are a master of all chrysler products !
I don’t mind too much 😅 thank you!
Love the video. I am a new subscriber my first car was a 63 sports fury I bought it with sized 318 I swapped it with a 383 that I pulled out of a 67 or 68 New Yorker not sure what year no, I did was put headers on it I had to make motor mounts I got on it one day around the corner and the fan went through the radiator The car sounded fast, but it couldn’t get its own way sure smoke the tires but couldn’t get out of its own way I wish I still had the car I am Learning a lot in your show Thank you for sharing your experience 💜😊
I got a 67 rn. Getting it looked over by a first gen expert. Dashboard getting fixed. Super underrated car but best to buy a completely restored to have less headaches. Its an intricate unique car.
Experience is you obtain right after you need it what an awesome statement of life general😅 overall you are very good troubleshooter keep up the good work😅
I'm only a pretend mechanic, but after you went through everything else, I thought "Well, I may be crazy, but... cam?"
I am proud to now be a *professional* pretend mechanic.
Also, I'm about to rebuild a front end, including lower A-arm bushings, so thanks for saving me lots of trouble there with your polyurethane advice. Good stuff.
Thank you. This video was incredibly entertaining and- dare I say it?- informative.
Outstanding! Hey, thanks for watching!
My uncle has a bone stock, all origonal 1966 Hemi Charger. He used it as his tow car when he raced his 65 Satalite. They were a neat combo going down the highway to the drags.
I dont care whats not rite, its beautiful.
I had one, 383 4bbl.
Hard time keeping stock motor mounts in it. Used a chain, no more problems.
I broke a few driver side mounts in my ‘66 big block car too. Fun times.