These are the top 3 mods I suggest for the Accord V6/J-Series platform! These mods in combination have given me about 25-30 whp/wtq gain and was proven with my baseline dyno run of my Accord. If you’re looking to maximize power, this would be one of the most cost effective ways to do it! Check out the video description for links to products, modifications and other channel resources! Purchasing from these links helps out the channel greatly because it gives a small commission which we use for more content. Thank you for watching the video and we hope to see you on another video :)~ Find ABC Garage on these other platforms: Instagram: @abcgarage19 Tik Tok: @abc_garage Facebook Group: All Motor J-Series How to Support ABC Garage: -Comment your thoughts, questions and or content you want to see! -Like the video to help with the TH-cam algorithm! -Subscribe to help the channel grow! -Join as a channel member for exclusive content and perks! -Consider sending a Super Thanks (personalized donation with a message)! -Share the video to people who would be interested in the content!
I have J35Z2 5A/T in my Nissan B17 Sylphy/Sentra. I love all J series videos, and your videos are one of my most favorite videos. J series engines are too underrated imho. And I appreciate you making videos of them, giving loves to the series they deserve! Super cool!
Your stock ignition coils are holding you back they're holding a lot of resistance Holly makes msd/ACCEL high energy ignition coils for the j series especially if you're going to run e85
U R RIGHT WHEN I RED LINE MY #5 SPARK FAILS ME AND SHUTS DOWN MY ENGINE PER SAY -- GOES ON SAFE MODE AND 5 MISFIRES - PLUGS ARE NEW BUT LIKE U SAID IGNITION
I just simply took mine unbolted them off and gutted them and bolted them back all three including middle third cat and man I can clearly tell the difference in both wheel starts spinning when barely pressing the pedal the throttle response and the sound man lots of head turns and questions people are often shocked to see it’s a Honda accord lol 😂❤
@@bigthings1477have you done it on the J series? I’ve been thinking about it because I’m doing my clutch soon but I hear the acceleration isn’t too different
I have the same vehicle. I like it but honestly I wish I had known more or done some research before getting it years ago. The aftermarket support is almost non existent and power gains are razer thin.
@@stevenwallace1580 I didn't know that, I'm thinking about getting and 8th gen. Can you explain further on what makes it not be as well supported? What would a better year be? Thx
Just did a stock j35z2 swap after repeatedly spinning a rod in my old engine. Now I have a new engine in great condition and an old one with parts I can try to port and polish on my own. Asides from the runners and intake manifold, what else do you think I can salvage for power on the old engine?
3:25 IDK what brand those are, but the ones I seen said 5-7 W hp, Just by themselves, no other supporting mods. Opening up the rest from intake manifold (35 37 swap, magnesium one (17160-RCJ-A01) from a hybrid for extra weight loss and extra cool points, literally, it helps with heat soak.) to exhaust tip definitely helps that figure..
@@abc.garage Ok sweet. Appreciate you man! Watching your videos inspired me to an 8th gen accord build. Had a 96 v6 accord before my 2010 and I've loved accords ever since haha
Saw your post on the philippine accord groups. Im planning to buy a 2011 v6 coupe. Are the SEDAN v6 engine parts compatible with the coupes? Gotta plan ahead in case i encounter some repair work
6:47 Not exactly. This engine does not have "headers" Headers attach to the HEAD. Those parts you talked about earlier the Precat / "HFPC's" ( High flow pre cat, but still essentially catalytic convertors ) on the side of the heads, THOSE are essentially "headers" the J pipe is essentially a "Y Pipe" that you find on a typical longitudinally mounted V engine applications. Look at the Mustang or Camaro. Our engine is turned transversely so the exhaust is a bit more confusing. They call it a "J" pipe for obvious reasons. This confusing naming scheme all boils down to Hondas weird head design on these cars. Rather than 3/4 ports coming our of the side of the head, we get one big one. Convoluted nonsense scheme. Side note.. Can you imagine how these engines would do with a typical high flow head design with 3 exhaust ports per side?
@@abc.garage thank you , intake : I have TAKEDA, I don’t know for Headers: do you have any suggestions? Exhaust: between Magnaflow or Vibrant which one should I go with?
i have full str8 pipe rv6 pcd atlp test pipe (3rdcatdelete) str8 back to the factory tips on my 11 TL j35z6 , I have ATLP Jpipe but i have not added it yet rip still runing factory jpipe lmao, only thing i have up top is an cai
@@abc.garage I have been pausing the video and looking stuff up. Haven't even finished it yet and you already replied. That's dope. You should do a throttle body bypass (bypass coolant lines that run to the throttle body which create heat soak and raise intake air temps) and E.g.r. delete. and then dyno it again. You will be amazed at what those 2 little things will do for your car.
I'm tryna do all legal mods for my honda I don't kno what to do...I want legal exhaust, headers, and air intake....does that sound cool or am I missing something? maybe something that would complement everything?
Rv6 sells the pcd and high flow pre cats as well as the long tube j pipe that deletes the 3rd cat. They are still being sold. Had my hfpc and long tube j pipe delivered in January
@@TheHappiestWheels I don't want "high flow" I want full pre cat delete. And when I checked about 3 weeks ago. The ones I wanted said not able to be shipped to the u.s. anymore. ...
@@TheHappiestWheels I just got off the phone with jspec performance. They said Not available to be shipped to USA. I found another company but they only sell ones that are for newer accords they don't have anything for my year or motor.
@@bindthedevilloosetheangels wait what year and motor do you have, also I’m talking about straight through the rv6 website, or like kseries parts. That’s possibly just jspec that’s not doing it. I live in Missouri just so you know
@@abc.garage 🤣🤣 yea I want a legally modified car but I'm afraid all the legal parts are trash...in California there's certain brands that sell legal mods With carb sticker
Next mod, 15mm or 20mm spacers to fill out the gap in your wheel well, so your wheel & tire setup won't have that "pushed in" look @ the rear 🤷🏾♂️ ?....this is a pretty affordable mod with subtle effects that look good.
These are the top 3 mods I suggest for the Accord V6/J-Series platform! These mods in combination have given me about 25-30 whp/wtq gain and was proven with my baseline dyno run of my Accord. If you’re looking to maximize power, this would be one of the most cost effective ways to do it!
Check out the video description for links to products, modifications and other channel resources! Purchasing from these links helps out the channel greatly because it gives a small commission which we use for more content. Thank you for watching the video and we hope to see you on another video :)~
Find ABC Garage on these other platforms:
Instagram: @abcgarage19
Tik Tok: @abc_garage
Facebook Group: All Motor J-Series
How to Support ABC Garage:
-Comment your thoughts, questions and or content you want to see!
-Like the video to help with the TH-cam algorithm!
-Subscribe to help the channel grow!
-Join as a channel member for exclusive content and perks!
-Consider sending a Super Thanks (personalized donation with a message)!
-Share the video to people who would be interested in the content!
I have J35Z2 5A/T in my Nissan B17 Sylphy/Sentra. I love all J series videos, and your videos are one of my most favorite videos. J series engines are too underrated imho. And I appreciate you making videos of them, giving loves to the series they deserve! Super cool!
Thank you! Love to make j-series content and bring the community together
Just got a 2011 v6 coupe with only 20k miles on it. Mad exited to start throwing some money into it. Love the vids bro
Bro I’m excited for you! Definitely keep me updated on your build
only 20k!?
@@hakimdurand8427 maybe reset
They showed u the car fax?
Got a 2011 Honda accord ex-l v6 coupe from my dead grandma w 90k original miles. Rip grandma but the accord finna look sexy in your honor
Condolences, wish you luck on your Accord V6 build! Let me know if you have any questions 🙌
Your stock ignition coils are holding you back they're holding a lot of resistance Holly makes msd/ACCEL high energy ignition coils for the j series especially if you're going to run e85
Thanks for the info that is def useful
How interesting
Thanks for the info well noted
Please drop links??
U R RIGHT WHEN I RED LINE MY #5 SPARK FAILS ME AND SHUTS DOWN MY ENGINE PER SAY -- GOES ON SAFE MODE AND 5 MISFIRES - PLUGS ARE NEW BUT LIKE U SAID IGNITION
Coolant bypass for the TB helps a bit with cooler intake temps
Good to know!
I just simply took mine unbolted them off and gutted them and bolted them back all three including middle third cat and man I can clearly tell the difference in both wheel starts spinning when barely pressing the pedal the throttle response and the sound man lots of head turns and questions people are often shocked to see it’s a Honda accord lol 😂❤
hahaha sounds dope, these are definitely sleepers!
Did you straight pipe it bro ?
Lightweight crank pulley is the best thing I’ve done
I thought about doing that mod
Lightweight flywheel. Game changer.
@@bigthings1477have you done it on the J series? I’ve been thinking about it because I’m doing my clutch soon but I hear the acceleration isn’t too different
Car is beautiful brah. Really love the 8th gen accords. I’d love to own a v6 as a project like this one
Bro you gotta get one! They’re so good
Got a 4 cyl ima turn it into a super car!!!
2011 v6 coupe here. Appreciate the video and tips as always. Keep up the good work #j35gang
Fellow 8th Gen owner welcome! Love to hear of other V6 owners
I’m rolling with the 2010 i4 coupe, makes us cousins 😭😭😭
I have the same vehicle. I like it but honestly I wish I had known more or done some research before getting it years ago. The aftermarket support is almost non existent and power gains are razer thin.
@@stevenwallace1580 I didn't know that, I'm thinking about getting and 8th gen. Can you explain further on what makes it not be as well supported? What would a better year be? Thx
J-SERIES FTW!!!! 😤
Yes sir 🤝
J swap the world!
Yes sir .. Let's Go !! 💪🏼
Thanks for the support like always 🤝🔥
Whats are the best websites for buy part for 8th gen accord 😅
I’ve bought a lot of stuff off P2R
What are those 3 parts called and where can I compare them? do they work on Honda Accord 3.5L V-6 2008 Coupe?
They’re all named in the video and yes it works with the car as long as it’s 2008-2012 and a v6
Just did a stock j35z2 swap after repeatedly spinning a rod in my old engine. Now I have a new engine in great condition and an old one with parts I can try to port and polish on my own. Asides from the runners and intake manifold, what else do you think I can salvage for power on the old engine?
The J-Pipe, full exhaust, full intake
I’m about to swap the same engine in a couple days . Any advice on how to make it easier ?
3:25 IDK what brand those are, but the ones I seen said 5-7 W hp, Just by themselves, no other supporting mods. Opening up the rest from intake manifold (35 37 swap, magnesium one (17160-RCJ-A01) from a hybrid for extra weight loss and extra cool points, literally, it helps with heat soak.) to exhaust tip definitely helps that figure..
They’re RV6 HFPC
put the magnesium j35y8 intake manifold on my j30a4 with new ngk iridium’s. the engine response and power is insane coming from a 20 year old engine
Have 08 accord coupe with 22,000 miles.v6 loaded except Nav.Looking to turbo if possible.Any advice would be great.
Not familiar with turbo’ing, but I have a Facebook group that can help! Join it for sure
Will these tips still apply to a 2007 v6 accord
It still does because they have similar engines
what intake do you prefer? I have a 2005 accord v6 fully straight pipe rear cat delete
I never got an intake but the injen ones are pretty good
Does your build pass smog? I own one of these in Cali as well
Nah it won’t pass as it was there
Hey man did you get a local shop to install the spacer and runners ?
Yes sir I did
One of my stock pre cats is clogged. Was thinking of getting some hfpc/pcd for my 2010 accord. Does the stock EGR valve connect to those port runners?
Yes it does!
@@abc.garage Ok sweet. Appreciate you man! Watching your videos inspired me to an 8th gen accord build. Had a 96 v6 accord before my 2010 and I've loved accords ever since haha
What tune did you get?
Custom dyno tuned by DT tuning. I have videos of the full process
Cool video 🦾 Lightweight pulleys/flywheel add decent engine response and power also🔥
I’m looking into those!
Do you get a check engine light? Did you have to tune the car after exhaust mods? That's a clean Accord.
I had a CEL from the HFPC’s and yes the tune cleared it. My newest video is of the 91 tune (uploaded yesterday)
Looking at 9.5 gen 6-6 by end of yr. Do you have links to these mods?
Umm, they’re different for the 9th Gen so I’d suggest you visit RV6 and P2R website to get them for your year!
Saw your post on the philippine accord groups. Im planning to buy a 2011 v6 coupe. Are the SEDAN v6 engine parts compatible with the coupes? Gotta plan ahead in case i encounter some repair work
Same parts yes
@@abc.garage 🙏
What wheels are those and spec?
HFP wheels
6:47 Not exactly. This engine does not have "headers" Headers attach to the HEAD. Those parts you talked about earlier the Precat / "HFPC's" ( High flow pre cat, but still essentially catalytic convertors ) on the side of the heads, THOSE are essentially "headers" the J pipe is essentially a "Y Pipe" that you find on a typical longitudinally mounted V engine applications. Look at the Mustang or Camaro. Our engine is turned transversely so the exhaust is a bit more confusing. They call it a "J" pipe for obvious reasons. This confusing naming scheme all boils down to Hondas weird head design on these cars. Rather than 3/4 ports coming our of the side of the head, we get one big one. Convoluted nonsense scheme.
Side note.. Can you imagine how these engines would do with a typical high flow head design with 3 exhaust ports per side?
It would be much more effective with 3 exhaust ports per side
Where did you buy this car? Pennsylvania?
CA
Hello, I have the 8th gen accord 2.4L
Any mods suggestions?
Thanks I’m advance
I would say do the basic bolt ons, intake, headers and exhaust and tune
@@abc.garage thank you , intake : I have TAKEDA, I don’t know for Headers: do you have any suggestions? Exhaust: between Magnaflow or Vibrant which one should I go with?
best carb legal air intake for 2013 honda v6? can point to a website bro 🙏🏾
I would say Injen would be your best bet
Did you lose low end torque with the single exit??
Not that I noticed
@@abc.garage thinking about going single exit on my 6-6 sedan just because I like the sound of it better and it looks cleaner
i have full str8 pipe rv6 pcd atlp test pipe (3rdcatdelete) str8 back to the factory tips on my 11 TL j35z6 , I have ATLP Jpipe but i have not added it yet rip still runing factory jpipe lmao, only thing i have up top is an cai
i do have ktuner but n33d someone to really tune it
Cleannnn
yo which resonators are you running you have the best sound j ive heard on video no mufflers right?
All vibrant resonators, I have the full setup on my channel. It’ll show you step by step what to run!
@@abc.garage ok
gotta say PCD/HFPC is the best mod, well well worth it for anyone wondering if to get it.
let them know! This is facts.
is it carb legal in ca?
@@definitionXrp nope
@@Philllin 🚔 lol 🤣
I have an 06 Odyssey with the j35, and I was wondering if most the parts from accords would also fit the odyssey
No bc that’s a different motor
5:04 ???? the intake runners are the lower part. Aren't they? or are you referring to the head?
Meant the head my bad
@@abc.garage I have been pausing the video and looking stuff up. Haven't even finished it yet and you already replied. That's dope. You should do a throttle body bypass (bypass coolant lines that run to the throttle body which create heat soak and raise intake air temps) and E.g.r. delete. and then dyno it again. You will be amazed at what those 2 little things will do for your car.
Because my 37 is missing this part, I can't find it in Taiwan May I ask where you can get it?
Try P2R
because my idle speed is not smooth
I can't find the corresponding one here in Taiwan.
This the same engine in the Pilot?
No, slightly different
You don’t have the VTECH?
I do lmfao the engine cover just isn’t on….
I'm tryna do all legal mods for my honda I don't kno what to do...I want legal exhaust, headers, and air intake....does that sound cool or am I missing something? maybe something that would complement everything?
Most of these mods are illegal lol at least in the state I’m in
@@abc.garage dammit how in the world do u pass smog? Take it all off put it back on...tough
Do you have the links for your exhaust ?
It’s custom so you’d have to buy all the pieces
Fast guy
I need to be faster
Is these mods can increase hp for accord coupe 2008 but 2,4l?
No this is for the V6
It’s not even worth putting money into the 2.4l… sorry bro. It’s not really going to even be quick unless you turbo it
@@CommentCorrector so do you advise to turbo it then?
@@rikomendes3694 if your willing to spend thousands instead of getting a faster car then do it 🤷♂️
Yo get the zdx 79 mm throttle body. More air bigger spark more fuel.. get it screaming I hope I get some mods tax return lol
I def am considering it!
What mods did you install 8th gen accord that made you fail emissions
Literally the ones in this video
pre cat deletes are not available in us anymore. I would love to be proven wrong. Anyone know where
I can get some?
I’m not sure when they stopped selling them in the US
Rv6 sells the pcd and high flow pre cats as well as the long tube j pipe that deletes the 3rd cat. They are still being sold. Had my hfpc and long tube j pipe delivered in January
@@TheHappiestWheels I don't want "high flow" I want full pre cat delete. And when I checked about 3 weeks ago. The ones I wanted said not able to be shipped to the u.s. anymore. ...
@@TheHappiestWheels I just got off the phone with jspec performance. They said Not available to be shipped to USA. I found another company but they only sell ones that are for newer accords they don't have anything for my year or motor.
@@bindthedevilloosetheangels wait what year and motor do you have, also I’m talking about straight through the rv6 website, or like kseries parts. That’s possibly just jspec that’s not doing it. I live in Missouri just so you know
are these mods legal?
😭 no
@@abc.garage 🤣🤣 yea I want a legally modified car but I'm afraid all the legal parts are trash...in California there's certain brands that sell legal mods With carb sticker
Jail.... straight to jail... 😅😅
I like the video I'm just trying to understand (and build my own) not be a jerk... I have a j32a3 (tl) they don't have "headers" 6:42
Certain J32 applications have header options.
He’s talking about the a2 before they made the 04-08 gen
" based on my baseline dyno run." what do you mean dyno run , do my car need to dyno run for me to get the parts
I’m saying that bc I documented the wheel horsepower with these mods
Where did you buy the high flow catalytic converters from?
RV6
Pcd does not free up that much power maybe a few hp but that’s it and that’s true of all cars for the most part modern catalysts are very efficient
Interesting, tbh in this platform it does give a good power gain
Would this work on a 2008 tl type s also?
Same mods work, but just have to be specific for your tl
Bought my moms 12 v6 with only 38k on it
Clean
Got a 2011 4 cyl gonna turn it into a super car ENGINE SWAP and reset rebuild everything Fck the price PROTOTYPE COMING
Clean!!!
Im dying to get stuff done halferland performance got good parts and ECU upgrade 🏁♥️🏁♥️🏁♥️🏁♥️🏁♥️🏁♥️🏁♥️
Dopeee
Next mod, 15mm or 20mm spacers to fill out the gap in your wheel well, so your wheel & tire setup won't have that "pushed in" look @ the rear 🤷🏾♂️ ?....this is a pretty affordable mod with subtle effects that look good.
Lmfaooo I have been on and off about that bc I do want to switch up the wheels
I just did it to mine lol, fixed the rear fitment, my coils did the same thing his did, it looks great now
hello part j37 14260-R70-A01 RGK003 please
P2R may have it
@@abc.garage okay, 🙏🏻
😏
Yuh
You need an intake upgrade
I thought about it but idk if it’s worth the money for the minimal gains
It’s not minimal at all
Do you own 08 v6 accord ?