(HOW TO) Mobile Home re-roofing in 11 minutes
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2023
-  How to install a new mobile home roof in 11 minutes. Drews Roofing and Home Repair of Southport, North Carolina. We are at the mobile home roofing masters. Brunswick County, North Carolina mobile home repair with Drew and Paul. #mobilehomerepair #mobilehomes #diy
- แนวปฏิบัติและการใช้ชีวิต
Drew and his friend came into Golden corral sat in my section and were very kind and generous gave me a fantastic tip. Just wanted to say thank you and let you know that this is a great video and so are your other ones too big thumbs up
That is awesome! Thank you for stopping by and checking out my channel. I will share with you the video. We did Wednesday, Thursday and Friday.
th-cam.com/video/BuxRDtF7zvM/w-d-xo.htmlsi=Qp_KW4eq0BoS386e
th-cam.com/video/a4I_Twu-rlg/w-d-xo.htmlsi=CUOwiA93-SV5EeQW
Nice
Looks great! Thanks for the video.
Thanks for your time
Thanks so much!
You're welcome!
As always, beautiful 😊
Thank you! 😊
Great job
Thank you for the video. About to possibly begin a roofing venture this summer.
Glad it was helpful!
Great video!!!
Glad you liked it!
That was so satisfying to watch! Seems like you two make a great team. I wish my roofers were as competent as you two. Got a new roof 3 years ago and it started leaking worse than before and still hasn't been resolved. Hoping to just get tpo roofing on top and be done with this nightmare. lol
Im a modified flat roofer myself have done a few rubber nice to see you take prid in your work looks great
Thanks 👍
I’m on here. My Dad roofed for 35-40 years
Hello my friend. Hard work bro. Thanks for the video
Thanks for watching the video
wow great job good video
Thank you very much!
Nice and I share you out on my community tab 😁
Awesome thank you!
That's a hell of a good job on that mobile home! Very impressive. Cam you glue that rubber down to a roof that has a good thick coating of Henry elastomeric coating on it?
You can put it up there, but I don’t know if you can glue it down not sure if it will stick but I still think it will work and then you can code it WHITE. I think what you wanna know is can you put it down without putting OSB on there first and the answer is yes.
My. Son. Needs to see this. one
Share. Thanks
Awesome. Your new name should be “The Mobile Home Medic”!
I like it! I just like helping people really that’s my goal. It was to help somebody I know how it is to struggle with money and expenses. I’ve struggled all my life so I like to help people struggle in life to make it easier for them so if I helped you I’m glad I did it.
th-cam.com/video/AGnQow7qus4/w-d-xo.htmlsi=qXSyDshrRGA8mtGb
what kind of rubber is that and where do you get it from, I'm a new mobile home owner and am trying to learn some tricks to fix some things ... we are primarily dealing with a leaking roof, hoping all will hold out til spring to get it fixed, its not a terrible leak but this home was built in 81 and im pretty sure all is close to original.
Here you go this video should help you
th-cam.com/video/AGnQow7qus4/w-d-xo.htmlsi=XKmnWyH-s4aZt1mG
I need to repair my own mobile home roof also. Where do i buy the rubber material that you used in this video? can you make a video on where you get some of these types of materials like the roof edge trim that holds the rubber in place.
Yes, I have made videos like that actually
I buy all my material here at ABC Supply store for my rubber roofing
th-cam.com/video/DfpeJkkIXHI/w-d-xo.htmlfeature=shared
Ya'll work well together. Hopefully, you can find one or two more knowledgeable young helpers. I know that's a lot of heavy duty work and it's hard on your body. You guys are very professional and did a "BEAUTIFUL" job !!!!
Thank you so much
I have to try and repair my mobile home roof. I have no idea what I'm doing and this video is so helpful. Thank you. Wish you were in WI cause I'd just hire you guys to do it. How did you get the old stuff off?
You can do it!
Beautiful job both of you did. I have a ? Where my 2 half on my mobile home meet i see the ceiling parting alone the edges on both side i have a beam inside with panel. Both side of that show a gap is this from settling or saging because the outside panel in some areas looks like were to to sheets going you can see the crack seal line starting alone the siding around the 4 sides? I believe this area was a wash long ago because when you dig the earth stone and sand is in the yard. Do i need leveling before having work done. Also has termites dont lbow how much bought it 3 1/2 years ago inspector said then was all good. Please guide me im in California. Ty 👍👍👍
th-cam.com/video/AGnQow7qus4/w-d-xo.htmlsi=K2LTTNPIhKSQWwNZ
This should help on the roof. I buy my material and ABC Supply.
Get spray for termites as soon as possible
Will the lack of ventilation provided by the rubber lead to the osb deteriorating faster?
So far we’ve been doing them for over 20 years never had any trouble. Now that we make them white I feel it will be cooler
Drew I have a rubber roof. Hotter than hell in the summer. I want to cover with regular shingles.How would I pitch in the middle to then lay new osb and then tar paper and shingle it. Can’t afford trusses so was wondering if I could use a thicker furring strip down the middle to create pitch. What cha think?
Not sure how you would do that
Drew, i have a MH similar to this with no eaves. Above every window is something like a J channel to catch water & divert to sides of window. Well they leak now, and i need to replace them because they leak but cant find them because i dont know what theyre called. Do you have any clue? Or a better alternative to keep the water away from the tops of windows without redoing the roof??
You have to buy them things at a Mobile Home Supply store. You won’t buy them at Lowe’s or Home Depot or any other box store. If you want the gutters from a mobile home you will have to go to a mobile home store, so look that up Mobile Home store near me or Mobile Home Supply store near me if you do that on Google, you should find something call them. They will tell you where to find it. I have videos on replacing it, if you type in gutter replacement, you’ll see I have two of them
Thanks I’m going to try to do my roof myself
You can do it!
How do you decide on thickness? Currently planning on doing mine
I use 045 mil EPDM Rubber the other one would be 60 mil. You can use either one you want to 045 is plenty but if you have trees over your roof, you might want to add 60 mil. You can do this. I make plenty of videos as a matter fact if you watch my videos from last week I made three videos showing exactly how to do this project, thank you for watching 910-294-1761
What name do I find that rubber for the roof under, please?
Epdm rubber
Mr Drew a buddy of mine had some floor repairs some yrs ago He said you can see the screw heads in his Linoleum how did this happen thanks in advance
They didn’t put the screws in far enough obviously. If you put the screws in properly, you would not see them. We use screws every floor. I’ve never seen him show up through the linoleum
you used a 1x could I run a 2x4 down the center and 1x on the sides to create a small peak? Not needed but my flat roof has always bothered me
The one by fours were only used for swimming that’s it the next one we do we’re going to put two by fours down on the entire roof every 16 inches across and layer of plywood on that. Be watching coming soon I believe.
Love you guys got a question though I left my water running in the utility room ,need to say it went through the trailer ,42 foot long out 4 feet went through the ductwork went like a waterfall cut the underbelly plastic ran for two days can I take the plastic and insulation out? How many heaters do you think I’ll need underneath hoping you can help me out. Thank you.
Buy a dehumidifier it will remove most of the water. Gosh. You have big trouble going on. Wish I could help more. Dehumidifier.
@@Drewsroofingandhomerepair I was watching some videos and they talk about a gator or blowers. What are these and what do they actually do I’m following your videos so next week I’m going to try to do this. The temperature outside is about 42°. I’m going to cut out the black tarp and pull down the insulation. Should I have heat under the trailer then the dehumidifiers? The black tarp what is it called and how thick is it?? What type of insulation do I put up please. I’ll go to Lowe’s.
Not thick at all. If you do cut it out I will say it won’t be easy putting back. So I just insulted mine and left it that way
Where did you get the rubber membrane that big for the roof? I couldn't find it at my local hardware stores.
ABC supply. Look it up on Google.
If I can’t find any that big locally, could I over lap it?
Yes
Se puede aplicar ebsima de la lamina o solo Madera
You can put it on either 1
Only needs to be on 1 side. Watch a few of my videos you will see
We're does a guy pick up rolls of rubber roof covering like this. Help would be nice thanks
ABC supply
Best distributing places like that only not at Lowe’s not at Home Depot
This probably is a crazy question, but could a tin roof be put on right after that ?
No, I don’t think so
That is a beautiful roof. I wish the clown that just did mine had half the knowledge and expertise to make mine look that good. Despite giving him pointers on doing the job, he ignored the advice and screwed it up.
That sucks my friend. I wish I could’ve been there to help you.
hi,what name material roof you replace?
Epdm rubber
Hi I’m in Wilmington NC and my mobile home roof has a leak I can’t solve ! I need it fixed !
I can fix it. Call me
How much would something like this be on a double wide
I have never done a double wide generally double Wides have shingles and this is a single wide with a metal roof so I’m not real sure what it would cost to do a Doublewide. I’ve never done one before my guess would be somewheres around $15-$18,000 on a Doublewide to be honest with you generally I charge somewheres between seven and 11 for single watch.
How difficult would it be for a person to put a rubber roof on a 12 ft singlewide by themselves?
You need at least 2 people. I do it with just me and Paul. We are starting a new roof job on Tuesday. Make sure you ring the notification bell so you notify the next video I put out it will be with me and Paul alone installing a rubber roof on a single one.
Yeah great video I think the rubber is. Very nice but will it crack over time like the look seal / roofing tar you guys fast forward the video I wanted to follow the steps to do my mobile home roof with rubber did you leave links in the description? Thanks guys again awsome work Joey mass area
Whats the approx. cost for a rubber roof like this on a manufactured home?
According to size. 8 to 12.000
Could I hire y’all to do my roof dead serious
Where are you?
910-294-1761
Drew... you and Paul are getting a little long in the tooth. It's time to roll up to the the local high school and ask about two young whippersnappers that don't look like they are going to make it.
It’s hard to find good help it really is so Paul and I did a pretty good job on it and I plan on doing another one when I come back from the mountains. I’m going to the mountains this weekend Batcave baby.
It’s hard to find people that wanna work that’s the problem even at high school they’re lazy
Roofing sucks that's why
If you need another job for your videos, my trailer is 5 years overdue and I'm in a panic, don't know any roofers, I got about 5000.00 to spend. Or, If you know anyone you can refer me to in Anoka Minnesota, I'd surely appreciate it. I think you do a fantastic job.
$18,000 was the cheapest I got quoted.
the process looks simple enough. how much would one expect to pay a roofer to remove existing roofing and replace with this style of roof on a mobile home roof ~14x65? (no porches or anything). i have an elderly relative in a mobile home and the roof is leaking. i'm trying to figure out what the different roofing options are what they might cost. one roofer looked at it and said it's 9.5 squares and gave estimates for poly glass and epdm. they're both expensive. i'm just trying to find something inexpensive that will last a decade. i don't imagine she will be in this dwelling for much longer than that.
For me and what I do 9000
@@Drewsroofingandhomerepair I appreciate the quick response! That is in the ballpark of the local guy's estimate. I like how your company installs the OSB and I think that should be mandatory.
@joeweaver9913 here you can buy relatively new mobile home for less. Wtf is going on in America, has money become completely worthless
@@symbioticape I was surprised at the price, but it's consistent around here. $9K to $10k for a 14x66 trailer to install new EPDM.
I was floored. I live in a 3br colonial had had quotes from $6300 to $8500 to do my roof with asphalt shingles about 8 years ago.
I thought the trailer roof would be maybe $3k to $4k. I was so wrong. My parents roof is still not done. They don't have the cash and getting a loan for mobile home improvement is difficult
Where can one buy this plastic
ABC Supply store
How much is the price for this job?.
8 to 11,000
what do you do with all the scrap rubber left over from the jobs you do i hope recycle it so you can get some of your money back from it:)
I either find a friend that needs a piece of rubber, or I use it for patches in pieces here and there
as long as none goes to waste you got your money out of it:)@@Drewsroofingandhomerepair
🫶🏻🇬🇧🫶🏻
You need a holiday…. Come to Northern California and help me fix my trailer roof! 🙏🏼🤓🤍
Maybe one day! Ya I wish.