Thank you so much for the kind words! I'm thrilled to hear that you find the content clear and helpful. Your support means a lot, and I'll do my best to keep delivering the content you're looking for. If there's anything specific you'd like to see or any topics you'd like me to cover in future videos, feel free to let me know. Thanks again, and I appreciate your support!
Virberello, you are my new go-to scooter guy! My wife's 125 Lance Cali Classic wouldn't start after a long Minnesota winter. I ticked off the easy stuff and no luck. I planned to try the automatic choke next, but then watched this video, found the entire carburetor, including the choke, for under $30, and decided, "what the heck, let's do this!" I AM NOT a mechanic of any kind, shade tree or otherwise. I've never done anything like this before. Your patient presentation and tips of the trade made it look like something I could tackle. And you know what? Boom! Started right up and purrs like a kitten! Thank a million. You helped me accomplish something that I never expected I'd try, and Jenny is ecstatic- she has her scooter back!
I don't bother looking anywhere else if I need advice. I come here first as you explain things making it easy to understand and less daunting. Removing a carburettor this week to clean dirty jets and this made me 110% sure I can do it safely and easily myself. Love your work .
I love You! You make things seem so easy and your patient. Like you're talking to me and explaining every detail and showing how to do it. I watch these more then once because I want to make sure.. But I appreciate you! Your the BEST!
Very good video . I enjoyed it. : ) I had to remove and install a triple carburetor on a older Suzuki .. it was harder to slide back in place then actually getting it back in the manifold boots. But I do enjoy working on the engines. You did this replacement excellent and I did learn a lot about the GY6 carburetors by watching this video.
Great video.... One thing i notice is that you run you filter towards your muffler which pulls in hot air.... Would it be better to place the air filter towards the original air filter position?
Hello my friend that is great ideas I never pay attention to that I don’t think will make a difference but anything can help to keep the motor at lower temperature 👍
Thank you sir great video ...I have a question I purchased a Powermotor PD24J Carburetor and it was missing the fuel/air flow screw but the hole is there , from the reviews on amazon it doesn't come with it, will it be ok with out it ?
Some carburetor have a plug at the idle mixture screw but they work fine now if you miss a screw and you have a hole the carburetor is not going to work
@QUICK-STAR I did not, but from my research i think that the closer the throttle body to the intake valve is, the better throttle response you will get, some carbs do this, but people usually mod the intake manifold
Hello my friend in Florida at sea level and hot weather with that set up I run a #125 main Jet but if your location is colder or little higher in altitude you could be ok running a #115 or #120 sometime is all about testing and tune to get the perfect performance
I have a wolf blaze 2011, 150cc,,,,you think upgrades like carb, exhaust and CVI are good upgrades for performance? What would you recommend? TY for your videos
Hello TheDayDreamer start to change the weight rollers to a 14g , next rejet the carb, change the exhaust and a performance air filter but do one thing at the time because there is a possibility that you will not like what is your scooter will become after all the modifications. Thank you for watching my video and be safe
Hey so when I remove the old air filter what do I do with the hoses??because I didn’t want to leave it in it made it easier to reach the manifold and carburetor on.
Hello Adon the small hose coming from the head valve cover you can place a little baby filter and connected to the higher part of the frame of the scooter or place a little resevoir catch can amzn.to/3uiXI2S and the large hose from the air filter you just remove that and the air box if you like
@@thomaskellem5315 Could be that the fuel valve is not opening because you have a leak on the vacuum lines or you have a dirty fuel filter or dirty fuel tank
Hello if you replace only the main jet I will not touch the screw if you replace both pilot/mainjet I with turn the screw only one quarter or less out and at the same time I will listen to the motor sound
do you have any information about "throttle stop screw"? Where is located, any how do you adjust it? Or should need to adjust it at all? Thank you have a wonderful day my brother from a different mother. 21:15
I just replaced my carb, I live in florida also what jets are you running? I tried 115 main and 38pilot but it was too much gas, I went to 110 main 35 pilot, ran good. Thinking about switching to 115 main 34 pilot what do you think
Hello my friend in my old scooter I had a 120# 38# pilot with a performance filter with my every day scooter I have a 110# 38 # and I like that because every day I ride around 20 miles . Thank you for watching my video
Hey i put a new carburetor in my gy6 scooter but i didn't have the fuel pump correct and i messed up that one but i have another one. This time I'll get it right
Hello my friend these carb can last around 5 to 8 thousand miles not bad for the price before you have to change the carb needle valve or diaphram. Thank you for watching my video
I bought a Nibbi PE28 and when I recieved it I noticed it doesnt have an electric choke (even after emailing the company and asking and they said "yes it works") will it still work on a taotao 150cc quantum?
Hello my friend yes it will work on your scooter Nibbi has a manual choke on the top you have to make sure you can pull the manual choke if you need it because it will be under your seat bucket . Thank you for watching my video
Hello you can fix the problem in 3 ways ( 1 ) place a 6 mm screw in one of the hoses to close it with a little clamp and the other hose connect it to the new manifold ( 2 ) buy a amzn.to/3YWnzx0 3/16" Hose Barb Fitting Equal Barbed Y Shaped 3 Way plastic and from 2 hose you make one ( 3 ) send back the manifold with one nipple and get the one with 2 nipple. I hope this will help you thank you for watching my video
Hello my friend you can test the wires that goes to the enricher with a multimeter if you do. Not get any voltage you could have a voltage problem or if you think that your enricher is bad just buy a new one or buy an manual conversion kit for 24 mm carburetor
I'm having a hard time with the new carburetor and the old vaccum lines / emissions system i installed a high performance carburator and I can't understand for the life of me what I have not done right I have spark and fuel just won't fire
Well I don't have spark so no I'm following it back until I find it never mind it's a hunting game no answer can be for sure on I guess lol thanks anyway
my original carburetor for my 150cc gy6 scooter has a tip on top with the line besides the other lines and the one that I purchase does not have that tip for that particular line
Démonter un carburateur de scooter, comme celui d'un Piaggio Xevo, est une tâche que beaucoup de gens peuvent accomplir avec un peu de patience et les bons outils. Cependant, il y a quelques considérations à garder à l'esprit. ### Ce dont vous aurez besoin : Pour commencer, vous aurez besoin d'outils de base tels qu'un jeu de tournevis (plats et cruciformes), une clé à douille, une clé à molette et des pinces. Avoir le manuel d'utilisateur ou le manuel de service est aussi très utile pour des instructions spécifiques et des diagrammes. ### Étapes générales : Tout d'abord, assurez-vous que le scooter est stable et sécurisé. Déconnectez la batterie pour éviter tout court-circuit et travaillez dans un endroit bien ventilé, car de l'essence peut être présente. Ensuite, retirez les panneaux et les caches nécessaires pour accéder au carburateur. Déconnectez les tuyaux d'essence, le câble d'accélérateur et le starter. Dévissez les fixations qui maintiennent le carburateur en place. Une fois le carburateur retiré, placez-le sur une surface propre et démontez les différentes parties telles que le flotteur, le gicleur et autres composants internes. Prenez des photos à chaque étape pour faciliter le remontage. Pour le nettoyage, utilisez un nettoyant pour carburateur pour éliminer les dépôts de saleté et les résidus. Assurez-vous que toutes les petites pièces et orifices sont propres. Le remontage se fait en suivant les étapes inverses du démontage. Assurez-vous que toutes les pièces sont bien ajustées et que rien n'est laissé de côté. Réinstallez le carburateur sur le scooter, reconnectez les tuyaux d'essence, le câble d'accélérateur et le starter, puis rebranchez la batterie. Testez ensuite le scooter pour vérifier que tout fonctionne correctement. ### Conseils supplémentaires : Soyez méthodique, prenez votre temps et ne forcez jamais une pièce. Notez les étapes, utilisez un marqueur ou des étiquettes pour identifier les pièces et leur emplacement. Si vous êtes bloqué, n'hésitez pas à consulter des forums, des vidéos en ligne ou à demander de l'aide à un ami plus expérimenté. Avec un peu de préparation et de précaution, démonter et nettoyer le carburateur d'un scooter peut être tout à fait réalisable pour un amateur.
Okay I'm over the stalling. So I'm just going charge carburetor. But the question is how do you know you're ordering the right one. If the deception states the carburetor fits a 150cc how do I it will fit my bike. Are they pretty much standard and universal?
Hello John if you have a gy6 150cc search on line for a gy6 carburator Inner Diameter (Intake Side):24mm,Outer Diameter ((Intake Side):32mm amzn.to/3vVYVxT
@@VirberelloScooterTips I’m going to have to make a short TH-cam video so I can show you like a little short so I can show you and demonstrate what I’m talking about
I cant anyone to tell me what the very small L-shape tube is on the carb and what nipple to goes on. It's always skipped. Can you help? And, there are nipples that don't have any hoses attached to them
Hello my friend sometimes can also be the fuel valve that doesn’t open because vacuum line is leaking or be a dirty carburetor . Thank you for watching my video
Dude is one of the best on TH-cam. He’s clear with what he says, shows everything you’re looking for. Thanks my man !!
Thank you so much for the kind words! I'm thrilled to hear that you find the content clear and helpful. Your support means a lot, and I'll do my best to keep delivering the content you're looking for. If there's anything specific you'd like to see or any topics you'd like me to cover in future videos, feel free to let me know. Thanks again, and I appreciate your support!
Virberello, you are my new go-to scooter guy! My wife's 125 Lance Cali Classic wouldn't start after a long Minnesota winter. I ticked off the easy stuff and no luck. I planned to try the automatic choke next, but then watched this video, found the entire carburetor, including the choke, for under $30, and decided, "what the heck, let's do this!" I AM NOT a mechanic of any kind, shade tree or otherwise. I've never done anything like this before. Your patient presentation and tips of the trade made it look like something I could tackle. And you know what? Boom! Started right up and purrs like a kitten! Thank a million. You helped me accomplish something that I never expected I'd try, and Jenny is ecstatic- she has her scooter back!
Hello Scott Fantastic I'm very happy I was able to help you with your scooter now be safe and ride smart ah ah ah and thank you for watching my video
I don't bother looking anywhere else if I need advice. I come here first as you explain things making it easy to understand and less daunting. Removing a carburettor this week to clean dirty jets and this made me 110% sure I can do it safely and easily myself. Love your work .
Hello my friend thank you for watching my video
I love You! You make things seem so easy and your patient. Like you're talking to me and explaining every detail and showing how to do it. I watch these more then once because I want to make sure.. But I appreciate you! Your the BEST!
Hello Paula thank you for watching my video I ' m very happy that I was able to help you
MY baja sc 150 it starts but when I turn it off and try to start it again it will not start again
What kind of movies? I've never heard of them. Besides.... I'd rather watch you!
Great videos. Thank you so much.
Hello my friend thank you for watching my video and for supporting my channel
virberello you are the best I really appreciate you when it comes to 150cc scooter thank you sir
Hello my friend thank you for watching my video
Man you’re amazing thank you for your videos!!
Glad you like them!
I go to your channel for every repair
Thank you for watching my videos
Very good video . I enjoyed it. : ) I had to remove and install a triple carburetor on a older Suzuki .. it was harder to slide back in place then actually getting it back in the manifold boots. But I do enjoy working on the engines. You did this replacement excellent and I did learn a lot about the GY6 carburetors by watching this video.
Hello Ed thank you for watching my video
You are bunches it help. Good instructions. 😊😊😊😊😊
Glad you think so! 👍👍👍
Great video.... One thing i notice is that you run you filter towards your muffler which pulls in hot air.... Would it be better to place the air filter towards the original air filter position?
Hello my friend that is great ideas I never pay attention to that I don’t think will make a difference but anything can help to keep the motor at lower temperature 👍
Thank you sir great video ...I have a question I purchased a Powermotor PD24J Carburetor and it was missing the fuel/air flow screw but the hole is there , from the reviews on amazon it doesn't come with it, will it be ok with out it ?
Some carburetor have a plug at the idle mixture screw but they work fine now if you miss a screw and you have a hole the carburetor is not going to work
What do you think about performance
carburetors, people say they improve throttle response a lot?
Yes the make a big difference in performance thank you for watching my video and Happy Holidays
@QUICK-STAR I did not, but from my research i think that the closer the throttle body to the intake valve is, the better throttle response you will get, some carbs do this, but people usually mod the intake manifold
Hello brother I'm very interested in what size jets your using on your 150cc with the nibbi elbow and pod filter
Hello my friend in Florida at sea level and hot weather with that set up I run a #125 main Jet but if your location is colder or little higher in altitude you could be ok running a #115 or #120 sometime is all about testing and tune to get the perfect performance
Another good one. Enjoy the gift my friend. Happy Holidays.
Hello my friend thank you for watching my video and Happy Holidays
I have a wolf blaze 2011, 150cc,,,,you think upgrades like carb, exhaust and CVI are good upgrades for performance? What would you recommend? TY for your videos
Hello TheDayDreamer start to change the weight rollers to a 14g , next rejet the carb, change the exhaust and a performance air filter but do one thing at the time because there is a possibility that you will not like what is your scooter will become after all the modifications. Thank you for watching my video and be safe
I love everyone of your videos bro...new subscriber!!!
Hello Robb thank you for watching my videos
@@VirberelloScooterTips bro, your videos working on your gy6 150cc scooter has helped me so much. You sir are a scooter god!
Hey so when I remove the old air filter what do I do with the hoses??because I didn’t want to leave it in it made it easier to reach the manifold and carburetor on.
Hello Adon the small hose coming from the head valve cover you can place a little baby filter and connected to the higher part of the frame of the scooter or place a little resevoir catch can amzn.to/3uiXI2S and the large hose from the air filter you just remove that and the air box if you like
@@VirberelloScooterTips thank you so much I’ve been watching you and my scooter is almost a beast💯🔥
Thanks for the lessons. Now i can have my il bello flyscooter on the road again
Hello Thomas thank you for watching my video
@@VirberelloScooterTips hey what does it mean when the scooter isn't getting any gas to the carburetor?
@@thomaskellem5315 Could be that the fuel valve is not opening because you have a leak on the vacuum lines or you have a dirty fuel filter or dirty fuel tank
Virberello? Why is my bike now just only putting gas just in the gas filter and not going through the pitcock and going to the carburetor.
If you put a bigger jet in would you turn the air mixture screw in or out
Hello if you replace only the main jet I will not touch the screw if you replace both pilot/mainjet I with turn the screw only one quarter or less out and at the same time I will listen to the motor sound
Do you have a video about throttle adjustment on the cable near carburetor?
No but you give me a good idea
do you have any information about "throttle stop screw"? Where is located, any how do you adjust it? Or should need to adjust it at all? Thank you have a wonderful day my brother from a different mother. 21:15
I just replaced my carb, I live in florida also what jets are you running? I tried 115 main and 38pilot but it was too much gas, I went to 110 main 35 pilot, ran good. Thinking about switching to 115 main 34 pilot what do you think
Hello my friend in my old scooter I had a 120# 38# pilot with a performance filter with my every day scooter I have a 110# 38 # and I like that because every day I ride around 20 miles . Thank you for watching my video
Hey i put a new carburetor in my gy6 scooter but i didn't have the fuel pump correct and i messed up that one but i have another one. This time I'll get it right
Thanks for the video
But how long can a carb last on my scooter ?
Hello my friend these carb can last around 5 to 8 thousand miles not bad for the price before you have to change the carb needle valve or diaphram. Thank you for watching my video
@@VirberelloScooterTips thank you so much 🙏 ❤
Where do you spray starter fluid?
I spray the starter frluid in the back of the carburator
@@VirberelloScooterTips could you do video? Not sure how to access it.
I bought a Nibbi PE28 and when I recieved it I noticed it doesnt have an electric choke (even after emailing the company and asking and they said "yes it works") will it still work on a taotao 150cc quantum?
Hello my friend yes it will work on your scooter Nibbi has a manual choke on the top you have to make sure you can pull the manual choke if you need it because it will be under your seat bucket . Thank you for watching my video
@@VirberelloScooterTips Your videos are seriously the best for gy6 scooters/mopeds. Keep em comin! Lol
Just did mine seems it had a little thump in idle still has one but not as bad might have to play with it
Thank you for watching my video
Dude, what should I do if im replacing my carburetor and my old manifold has two holes for vacuums hoses but the new one just one of them?
Hello you can fix the problem in 3 ways ( 1 ) place a 6 mm screw in one of the hoses to close it with a little clamp and the other hose connect it to the new manifold ( 2 ) buy a amzn.to/3YWnzx0 3/16" Hose Barb Fitting Equal Barbed Y Shaped 3 Way plastic and from 2 hose you make one ( 3 ) send back the manifold with one nipple and get the one with 2 nipple. I hope this will help you thank you for watching my video
I am having a problem with my start up for my scooter is there anyway I can send you a video to show you
Try to post your video on chinese project scooters group on Facebook I m in that group
What's the best market carburetor I can buy for my 150cc
Thank you i will be trying this today
Hello John thank you for watching my video
Very nice. Well explained Mi amigo
Hello Giorgio thank you for watching my video
I changed my scooter that was gummed up. Only issue I have is the auto choke doesn’t seem to work. Any tips?
Hello my friend you can test the wires that goes to the enricher with a multimeter if you do. Not get any voltage you could have a voltage problem or if you think that your enricher is bad just buy a new one or buy an manual conversion kit for 24 mm carburetor
How do I know which carborator. Fro my 2008 Zhen FT-5
150cc scooter
Is that a performance carburetor
Hello no that is just a stock carburetor but I should buy a performance one very soon
@@VirberelloScooterTips what carburetor should I buy for my 150cc
I'm having a hard time with the new carburetor and the old vaccum lines / emissions system i installed a high performance carburator and I can't understand for the life of me what I have not done right I have spark and fuel just won't fire
Well I don't have spark so no I'm following it back until I find it never mind it's a hunting game no answer can be for sure on I guess lol thanks anyway
my original carburetor for my 150cc gy6 scooter has a tip on top with the line besides the other lines and the one that I purchase does not have that tip for that particular line
Yes the newest carburetor they do not have the extra line but I don’t think It make to much different
Dear Virberello, is It the same for a gy6 50cc (not a 150cc) carburetor or are there any differences?
Hello Riccardo carburetor for 50cc are smaller in size but they work the same way
Démonter un carbu de scooter xevo est il a la portée de tout le monde ?
Démonter un carburateur de scooter, comme celui d'un Piaggio Xevo, est une tâche que beaucoup de gens peuvent accomplir avec un peu de patience et les bons outils. Cependant, il y a quelques considérations à garder à l'esprit.
### Ce dont vous aurez besoin :
Pour commencer, vous aurez besoin d'outils de base tels qu'un jeu de tournevis (plats et cruciformes), une clé à douille, une clé à molette et des pinces. Avoir le manuel d'utilisateur ou le manuel de service est aussi très utile pour des instructions spécifiques et des diagrammes.
### Étapes générales :
Tout d'abord, assurez-vous que le scooter est stable et sécurisé. Déconnectez la batterie pour éviter tout court-circuit et travaillez dans un endroit bien ventilé, car de l'essence peut être présente.
Ensuite, retirez les panneaux et les caches nécessaires pour accéder au carburateur. Déconnectez les tuyaux d'essence, le câble d'accélérateur et le starter. Dévissez les fixations qui maintiennent le carburateur en place. Une fois le carburateur retiré, placez-le sur une surface propre et démontez les différentes parties telles que le flotteur, le gicleur et autres composants internes. Prenez des photos à chaque étape pour faciliter le remontage.
Pour le nettoyage, utilisez un nettoyant pour carburateur pour éliminer les dépôts de saleté et les résidus. Assurez-vous que toutes les petites pièces et orifices sont propres.
Le remontage se fait en suivant les étapes inverses du démontage. Assurez-vous que toutes les pièces sont bien ajustées et que rien n'est laissé de côté. Réinstallez le carburateur sur le scooter, reconnectez les tuyaux d'essence, le câble d'accélérateur et le starter, puis rebranchez la batterie. Testez ensuite le scooter pour vérifier que tout fonctionne correctement.
### Conseils supplémentaires :
Soyez méthodique, prenez votre temps et ne forcez jamais une pièce. Notez les étapes, utilisez un marqueur ou des étiquettes pour identifier les pièces et leur emplacement. Si vous êtes bloqué, n'hésitez pas à consulter des forums, des vidéos en ligne ou à demander de l'aide à un ami plus expérimenté.
Avec un peu de préparation et de précaution, démonter et nettoyer le carburateur d'un scooter peut être tout à fait réalisable pour un amateur.
Okay I'm over the stalling. So I'm just going charge carburetor. But the question is how do you know you're ordering the right one. If the deception states the carburetor fits a 150cc how do I it will fit my bike. Are they pretty much standard and universal?
Hello John if you have a gy6 150cc search on line for a gy6 carburator Inner Diameter (Intake Side):24mm,Outer Diameter ((Intake Side):32mm amzn.to/3vVYVxT
I disconnected the exhaust hoses and forgot how to connect them back. Can you please help know how they go connected. Thank you.
Why do you leave the old air box in? It just seems to be in the way.
Hello Vincent I leave the old filter for a future project but I 'm not sure yet like a tool box or something different I'm still working on the idea
Can yiu help me I've put a new carb in to my 125cc scooter it is over revving on me it touch me off the bike in Monday
Need your help
What happen my friend
@@VirberelloScooterTips I’m going to have to make a short TH-cam video so I can show you like a little short so I can show you and demonstrate what I’m talking about
HOW to adjust the valve on a Baja sc 150 Scooter
Hello Zane try this video th-cam.com/video/csH2RGvXegI/w-d-xo.html
I cant anyone to tell me what the very small L-shape tube is on the carb and what nipple to goes on. It's always skipped. Can you help? And, there are nipples that don't have any hoses attached to them
the L is the fuel over flow
You keep twisting the carburetor an we cant see where the lines an screws are where the air hose go to
My 150cc gy6 won’t start, I checked compression, and spark, it must be the carb
Hello my friend sometimes can also be the fuel valve that doesn’t open because vacuum line is leaking or be a dirty carburetor . Thank you for watching my video
It's too hard too put the carb right back in intake manifold, the black frame bar is culprit 🥴
Yes you right I do not like that frame to close to the carb
Have some questions
I'm ready to answer
My scooter will not start
Hello Daniel check this video th-cam.com/video/M9db3uuTZHg/w-d-xo.html