Configuring Danfoss VLT Drives for Two Wire Start / Stop with POT reference || Digicon Automation
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2019
- || Two wire start stop with speed POT application ||
Parameter list for Two wire start stop with speed POT application :
1-20 = Motor Power [kW] [hp]
1-22 = Motor Voltage
1-23 = Motor Frequency
1-24 = Motor current
1-25 = Motor Nominal Speed
3-15 = [ 1 ] Analog Input 53
3-16 = [ 0 ] No function
3-41 = Acceleration Time
3-42 = Deceleration Time
5-10 = [ 8 ] Start
5-12 = [ 0 ] No function
Very Informative !
THANK YOU !!!
Wah sir nice explanation
Good work
Wo kann ich kaufen so eine externe Steuerung ? Danke.
Hi DIGICON Team,
Can you prepare video for controlling the VFD Speed with level transmitter
How to use external rev and fwr
How to start/stop with push switch?
Thanks
Sir please make a video ...
How to run a drive with analog refrence of another drive...
we will definitely do it in future...
Sir motor speed badana hae kaes badae
On command selector switch. Drive running ok. In case power failure. Again power come. Vfd running. I want power come time. Vfd selector switch reset/on. Parameter tell me sir
Auto mode running time how to adjust speed
Sir 12,18,19 number port me kese rivace forward settings Karne ... Plz 1 video post Karne ...
sir plc se kese vfd ko start karte hai.plz video me link
Sir what is the potential meter ohm.and how to select range
10 K ohm
Sir aap ne vfd ke pot ko explain nahi explain kiya please make video on this
POT on display is just for Hand On mode, in Hand On mode you can control the speed through that POT
Sir
Danfoss 51 model me agar password laga ho to password kai hata be.
Sir 4-20 MA se vfd ko kese start karege
th-cam.com/video/oMWMVvfrNu4/w-d-xo.html
in this video you can find the solution