CAD Design for Lion Head Medallion in Rhino 6: Jewelry CAD Design Tutorial #80

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ธ.ค. 2024

ความคิดเห็น •

  • @humbertocastillo9439
    @humbertocastillo9439 ปีที่แล้ว

    Gracias . Excelente tutorial. Felicitaciones. Bien explicado.

  • @Boldbutgold
    @Boldbutgold ปีที่แล้ว

    Thank you for your tutorials... Great content

  • @anhtuannguyen4827
    @anhtuannguyen4827 4 ปีที่แล้ว

    Hi PJ, I 'm really got stuck at the 5:34 when trying to trim using polar tray and the bottom surface to trim the top and the bottom parts , it always turned out not the way it supposed to be, would you please to going a little bit slower so I can see what's I am missing thanks

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      Hi Anhtuan, if it is hard to view which one is which to trim correctly. you can change one of the object in different color or change it to wire frame mode. it will be easier to see 2 different parts.

    • @anhtuannguyen4827
      @anhtuannguyen4827 4 ปีที่แล้ว +1

      thanks PJ, I have found that moment when you do gumball on the circle , I didn't see you mention that we need to move inward on both 9 o'clock and 12 o'clock points in order to proceed surface extrude then we can trim it correctly, now I can move further . Thanks again

  • @JrGurvindersingh
    @JrGurvindersingh 4 ปีที่แล้ว +1

    Thank you so much for tutorials!

  • @sarahmenendez9261
    @sarahmenendez9261 3 ปีที่แล้ว

    Could we do this with multiple center points within the circle pendant? Using Maelstrom for each

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  3 ปีที่แล้ว

      if you are talking about the background. Maelstrom is great but hard to unify the size if you have multiple objects.

  • @AKKAJewelry
    @AKKAJewelry ปีที่แล้ว

    I made it without the Lion :D! Thank you for sharing, you are amazing!❤

  • @zineblahlou9016
    @zineblahlou9016 ปีที่แล้ว

    Really gooooood job i like what you do keep going ❤❤❤❤

  • @comtedrewes2726
    @comtedrewes2726 5 ปีที่แล้ว +1

    Very good! I have learned a lot. Congratulations.

  • @rachelran6131
    @rachelran6131 3 ปีที่แล้ว

    Hi, thanks you for your video. can we make, ring with fingerprint in rhino 5? Thanks

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  3 ปีที่แล้ว +1

      you can use ink to get your finger print first, scan the image and save in jepg. then use the Trace app from www.food4rhino.com to trace the image into Rhino

  • @pintupalpalpintu5430
    @pintupalpalpintu5430 11 วันที่ผ่านมา

    Thank you ❤

  • @omphilepea4308
    @omphilepea4308 3 ปีที่แล้ว

    This was really cool PJ! I like watching your channel to learn different ways of approaching stuff I already learned from school. I love having options! Thanks again, all the way from South Africa :)

  • @janourzua
    @janourzua 5 ปีที่แล้ว +1

    Good job....is It possible to learn how to design the lion ...?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว +1

      Zbrush will be a better app than Rhino on the animal head.

  • @gethnoble4316
    @gethnoble4316 4 ปีที่แล้ว

    Wow!!! This will revolutionize my skills! Thank you PJ, you are the greatest!

  • @يوسفيوسف-ن1ث3ك
    @يوسفيوسف-ن1ث3ك 2 ปีที่แล้ว

    Thank you dear

  • @ALBABYY
    @ALBABYY 5 ปีที่แล้ว

    Thanks so much for these awesome tutorials!

  • @wildtrout7011
    @wildtrout7011 4 ปีที่แล้ว

    This is really good, can't wait to try it myself.

  • @byrin
    @byrin 4 ปีที่แล้ว

    Thanks for the vid. Is there a easy way to convert that lion mesh into polysurface , understand that mesh is not as ideal a format for mass production?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว +1

      You can use MeshToNurb command but it is going to be so many surface that is hard to do the editing.

    • @byrin
      @byrin 4 ปีที่แล้ว

      @@PJChenJewelryDesign haha with so many triangles, meshtonurb will hang my computer for sure

  • @ΚώσταςΝτέρκος
    @ΚώσταςΝτέρκος 5 ปีที่แล้ว

    Thanks Chen!!!
    Just wanted to ask you why i end up with a closed non manifold mesh and how i can fix it so i boolean with lion head.

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว +1

      I cannot tell without seeing the model. you can email me the model. I will take a look for you.

  • @jaytoven7
    @jaytoven7 4 ปีที่แล้ว

    How did you add the part for the bail?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      To make a bail. you can search "bail" keyword on my channel. there are several videos for it. here is one of it th-cam.com/video/qxDI_7-tGHQ/w-d-xo.html

  • @22trio101
    @22trio101 3 ปีที่แล้ว

    THANKS! I Loved this tutorial. This open a lot of "new" files re-use, by combining them, but, I got lost in the meshing process...

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  3 ปีที่แล้ว

      glad you like it. feel free to let me know what part is confusing you. I will try my best to answer the question.

  • @edyartworks
    @edyartworks 3 ปีที่แล้ว

    Hi pj.. can rhino make a lion or human head by itself?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  3 ปีที่แล้ว

      You can try Rhino 7 with SubD. However, Zbrush maybe a better program for it

  • @yahyaalzuhairi4853
    @yahyaalzuhairi4853 4 ปีที่แล้ว

    Good video. Can you shaw me haw to do cufflinks with any design on it just the front shap

  • @RiddleXpert
    @RiddleXpert 5 ปีที่แล้ว

    Awesome as always. Thanks to you dear PJ.

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      You can change the environment setting.

    • @RiddleXpert
      @RiddleXpert 5 ปีที่แล้ว

      @@PJChenJewelryDesign could you tell me where it is?

  • @joshuamacgregor8809
    @joshuamacgregor8809 4 ปีที่แล้ว

    Hello guys what’s a good laptop to use for rhino

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      I will have a video up for the equipment soon. I use gaming laptop MSI

  • @josjaniessen7588
    @josjaniessen7588 5 ปีที่แล้ว

    NICE! Thank you PJ

  • @dinurmiddya3824
    @dinurmiddya3824 4 ปีที่แล้ว

    Hi
    Have an any site for same design?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      do you mean lion head. I found it on cgtrader. there is a link at the description

  • @ltjewels2743
    @ltjewels2743 5 ปีที่แล้ว +1

    Thank you I have learned so much from you thank you ✌️✌️✌️✌️

  • @aself73
    @aself73 5 ปีที่แล้ว

    Hello PJ, can you create a ring with micro diamond pave on the side?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      I have all stone setting video on my course at pjs-school.thinkific.com/courses/StoneSettingModeling

  • @baoyuj5585
    @baoyuj5585 4 ปีที่แล้ว

    Is that ok to send a mesh file to the factory when making these jewerlry type of product?

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      If you are looking for 3D printing. they have to be in mesh and stl file.

    • @baoyuj5585
      @baoyuj5585 4 ปีที่แล้ว

      @@PJChenJewelryDesign I mean in real production, not 3D printing. I design bottles for a liqor company, recently I come up with some idea to combine shapes like sculpture with bottle design. But sculpts like a human face or lion face are quit diffcult to model using nurbs.

    • @baoyuj5585
      @baoyuj5585 4 ปีที่แล้ว

      @@PJChenJewelryDesign Thank you for your patient reply.

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  4 ปีที่แล้ว

      @@baoyuj5585 for the face sculpting. Zbrush will be a better app

    • @baoyuj5585
      @baoyuj5585 4 ปีที่แล้ว

      @@PJChenJewelryDesign yeah, I do sculpt in blender though. However, the scuplt mesh model will be merged with the solid I created in solidworks or rhino. My solution now is to simplify and make quad mesh in blender or Zbrush then bring them into rhino then turn the quad mesh into SubD which is still WIP and convert to nurbs. Sometimes this method just loses too much detail . My point is, , are STL or mesh files be accepted by the mold manufactor?

  • @mosinshaikh6622
    @mosinshaikh6622 3 ปีที่แล้ว

    plss can you make a dancing stone video

  • @abdengineer6225
    @abdengineer6225 5 ปีที่แล้ว

    Hello can u tell me the weight of this model after printting with 3d printer by resin

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      you can check out the weight topic at this video th-cam.com/video/sxYowvzwuf8/w-d-xo.html

  • @akshaykolvekar3732
    @akshaykolvekar3732 5 ปีที่แล้ว

    Very interesting topics of pj chennai 👌👍

  • @priyamittal4917
    @priyamittal4917 5 ปีที่แล้ว

    Hello mam,I have downloaded lion head but it's not showing in Rhino when I am importing it.

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      what type of file you download. I remember there are some option. Rhino will take stl file.

  • @adityabhandari5969
    @adityabhandari5969 5 ปีที่แล้ว

    Please make video about t splines

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      in fact, there is a good channel on TH-cam for Tspline. Check out their channel at th-cam.com/channels/PvV6YRdt8lBz524aZWHfYw.html

  • @SUGARdelite
    @SUGARdelite 5 ปีที่แล้ว

    very cool thanks

  • @theomcpherson7960
    @theomcpherson7960 5 ปีที่แล้ว

    Thank you so much. you're an amazing teacher! could you make a tutorial on basket or prong setting a 5 sided stone? like a pentagon shaped stone.

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว

      I have a stone setting online course. You can check at pjs-school.thinkific.com/courses/StoneSettingModeling Register for Free.

  • @devsasmal4728
    @devsasmal4728 5 ปีที่แล้ว

    Dwonlod 1 pes in side other no Show dwonlod opstion

  • @irinakalman9714
    @irinakalman9714 4 ปีที่แล้ว

    eh im lost from 6.36 min when layers started to change to make second layer in medallion

  • @biswajitsantra1030
    @biswajitsantra1030 5 ปีที่แล้ว

    Wow👌👌👌
    thank you

  • @bilaltighilt5254
    @bilaltighilt5254 4 ปีที่แล้ว

    Good

  • @troycooper255
    @troycooper255 5 ปีที่แล้ว

    Love it

  • @GoSharesPro
    @GoSharesPro 5 ปีที่แล้ว

    First comment ... Hehe like your video

  • @bishalmondal5426
    @bishalmondal5426 5 ปีที่แล้ว

    Wow.. but behind the lion head there is a lot of metal.. that should scooped out..

    • @PJChenJewelryDesign
      @PJChenJewelryDesign  5 ปีที่แล้ว +1

      you can mesh boolean difference out.

    • @bishalmondal5426
      @bishalmondal5426 5 ปีที่แล้ว

      @@PJChenJewelryDesign i think if drape the head and then give it specific thickness in materilise magics.. it would be better for market use..

  • @devsasmal4728
    @devsasmal4728 5 ปีที่แล้ว

    Lion dwonlod side send me