Thanks, PG. The information about rebuilding the curves as well as the use of the control points for forming the shape and also the use of offsetting the curve instead of the surface are all such good basic things to know and use.
Your tutorials are among the best I have seen, thank you. One question for you, at 10:20, what is your preferred method to set the gumball to the absolute center of the shape? Odd-numbered star shapes always suffer from non-centered pivot points as the center of the bounding box for the selected items is not the same as the center of the star-like shape. Curious about what your approach would be.
It depends on what you like to center with. the area, volume, distant? it can be all set up in rhino. for example. if you like to center by distant. you can always draw a curve and snap in the middle.
Thank you very much PJ for your tutorials, they are the best to learn how to model jewelry with Rhino that I found on youtube. One query: joining and reconstructing the curve so that later on, it will not be great for problems, but whenever you rebuild, it gives you many more control points (something that we supposedly should avoid in Rhino) and the second thing I observe is that Reconstructed curve is no longer as perfect as the original. Thanks, teacher!
Thank you for your thoughtful approach to teaching rhino. We learn from your mistakes and you process. Excellent reminder to REBUILD, and this very good use of loft.
Thank you PJ! I have a doubt , when I switched on the points it only appeared on the top and bottom of the loft , mine didn’t have any in the center.. is there a reason why ?
@@PJChenJewelryDesign rhino gold softwarehow can i download??? Can you show tutorials of rhino gold from start to end (basic) that i can understand easily
PJ, are you ok? I hope you're well. What can I say about your tutorials? Show, perfect, sensational. My sincere thanks. Thank you, always. Success for you.
Большое спасибо за то, что так щедро делитесь знаниями! Всего Вам доброго!
You are very welcome. Hope you enjoy rest of my videos as well.
I'm an architect and I learnt a lot from your tutorials. Thank you so much!
Gold they help!
Simple, straight to the point and what I needed, thanks a bunch
super!
Thank you so much for all your rhino videos PJ! Really really grateful!!
My pleasure!
Thanks for tip on rebuilding as well as offset the curve instead of the surface! Great advice
I was happy when I figure out that too.
awesome tutorial! thank you so much
You're very welcome!
A lot of great and important tips in this video. Definitely a GEM !
Super! Glad you like it!
The greatest Rhino teaching channel I have ever seen!
thank you !
Thanks, PG. The information about rebuilding the curves as well as the use of the control points for forming the shape and also the use of offsetting the curve instead of the surface are all such good basic things to know and use.
You are welcome, Ron! Haven't see your comments for a while. welcome back!
i loved your tutorial works. it's really explanatory. and ive learned many tricks thanks to you ! thanks a lot !
Glad to hear that!
You are amazing ! such clear explanations ! your channel deserves way more views !!!
Thank you Rainer! Glad you like it. please share my channel!
You are so good teacher. Thank you. 👌🌞
You are so welcome!
Hi Pj Chen,
I just wanted to say, You are THE BEST OF THE BEST! The way you explain commands and problems is all-inclusive.
Thank you!
That is super. I am glad you like my video. Check out others, you may find a lot of useful information.
Great example of how the REBUILD works!
😀
Glad you liked it!
wonderful tricks. well explained!
Glad you liked it!
me encantan todos sus videos !
Thank you!! More to come
這些指令說明得很清楚 相當實用 謝謝你
CJ Chien 不客氣喔！
At time 2:26 it looks like a smiley face and that made me smile.
🤣
it helps me a lot to understand. thank you
Happy to hear that.
Thank You PJ. I always enjoy watching and learning new techniques in Rhino!!!
You are welcome, Tim.
O my god you are a great teacher😭😭😭thanks a lot
You are very welcome. Please tell all your friends about my channel!
Awesome video! I always learn at least one trick from everyone of your videos.
Glad to hear it!
Your tutorials are among the best I have seen, thank you. One question for you, at 10:20, what is your preferred method to set the gumball to the absolute center of the shape? Odd-numbered star shapes always suffer from non-centered pivot points as the center of the bounding box for the selected items is not the same as the center of the star-like shape. Curious about what your approach would be.
It depends on what you like to center with. the area, volume, distant? it can be all set up in rhino. for example. if you like to center by distant. you can always draw a curve and snap in the middle.
Thank you, PJ, I really like the way you teach, it is very thorough.
You're very welcome!
Thank you very much PJ for your tutorials, they are the best to learn how to model jewelry with Rhino that I found on youtube.
One query: joining and reconstructing the curve so that later on, it will not be great for problems, but whenever you rebuild, it gives you many more control points (something that we supposedly should avoid in Rhino) and the second thing I observe is that Reconstructed curve is no longer as perfect as the original.
Thanks, teacher!
that is true.
THANX A LOT!! your tutorials are amazing!
You're very welcome!
Genius!! I now know I have been not rebuilding degrees to match. Thankyou so much!
Happy to help!
This one is so amazing! Just solved some problems bothered me so long! Thank you so much!
You are very welcome!!
Thank you! Your videos have been very helpful and you are a great teacher too.
Glad you enjoy it. check out more videos at membership!!
You are a rhino wizard!!! Thank you for these wonderful videos PJ!!
You are welcome!
thx PJ ...it was very useful.
Glad to hear that!
Great video once again! Thank you!
My pleasure!
Thank you PJ. I am grooving with you
Rock on!
Thanks a lot. Very useful and interesting.
You are welcome!
you the best pj
Thank you!
Thank you PJ! I have a lot to learn with making organic models so this helps a lot :)
That is great. You are welcome, Nicolle.
Nice as always
Thanks!
Thank you so much for sharing! An interesting and creative way to create organic the shape using basic Rhino commands. :)
Glad you liked it!
Thank you for your thoughtful approach to teaching rhino. We learn from your mistakes and you process. Excellent reminder to REBUILD, and this very good use of loft.
You are so welcome
Very clear and direct. Thank you.
You are welcome!
the bottom is funky!!
When you have blend the surface and if the original surface you blend from has bump. then you will have bump. you can always use cap. or flat bottom.
Awesome tips PJ...!!! Thanks...
You are welcome Isaac!!
Very helpful tutorial PJ thanks
You are welcome, John.
Great video. I liked the tips on rebuilding and offseting curves instead of surfaces. I undestand why I had issues on some of my objects.
that is great!
Thanks for sharing.
Thanks for watching!
Good lesson
Thanks! 😃
great way to modellize this shape...thanks
You are welcome, Emrah!
Thank you.
J;apprends toujours avec vous.
Merci PJ
that is awesome!
That is just SUPER!!!
Glad you like it
Thank PJ . I always enjoy of your useful tips
Great to hear that!!
Thanks for the tutorial. You explain the reasons how and why commands work and that is very helpful
You are welcome. I am happy to know you find the video useful!
Excellent video PJ. Thank you for your time and expertise.
You are very welcome, Karen.
My all work in gold jewellery deisgn Sir.....
great tutorial Thanks
You are welcome, Michael!
Very helpful Video sir
Glad it helps!
PJ - Excellent tutorial. I always learn something new from your tutorials
Happy to hear that Roger!
Thanks for the tutorial! Always super interesting and clear!
Glad you think so!
o sea Chen te amo!!!
Happy to know you like my video!
Can you please show us your material and render settings? It looks great! thanks.
I have keyshot rendering tutorial on the playlist. It shows all my setting for the keyshot rendering.
Simply amazing
Glad you think so!
i have this question what is the minemum offset for surface for good casting i work with resin
It depends on the design. what is the design look like.do you have image
@@PJChenJewelryDesign yes how can i send photo
Thank you
Glad you like it
Very interesting...thank you pj
You are welcome, Anees.
Thank you for the videos and tutorials are realy helpfull and looking forward for more 🙏
that is great! and welcome to my channel!
Thanks PJ
You are welcome
The video is great !
Thank you.
So good
Thank you
Thumbs UP PJ!!!
Thank you Ani
Excellent video, Thank you
You are welcome!
Hello pjchen
I can’t open the control point on the surface just like your video at 10:13.
What’s wrong with it?
Thx
if the surface is polysurface, it won't work.
tank you PJ
You are welcome!
Thank you！
Welcome!
thank you again PJ, A very interesting tutorial!!
You are welcome Josja.
Awesome video, I learned a lot! Thanks
that is great!
wonderfull..
Gold you like it!
gracias
thank you so much !
You're welcome!
Thank you alot! Can you please post more videos about organic forms in jewelry design? Many thanks in advanced
You are welcome, Niazi. More videos to come.
Why not use sweep rail2?
There is always more than one way to model the same model
sir tell me this last one you just told me about closed solid polysurface and this effects on object like gold pattern sir?
not quite understand your question?
@@PJChenJewelryDesign sir it meant ( CLOSED SOLID SURFACE) Which showing gold effects sir
Thanks a lot sir 😊
You are welcome!
Thank you so much =)
You're welcome!
How can you close the surface above and below? That it becomes more solid
blend surface
Very good! Thank you!
You are welcome, Hugo!
I really like all your videos. you Design on Rhino but for me i design on Matrix 8 ... Good and keep move to the future... Good Luck
thank you!
Nice
thanks!
Thank you PJ! I have a doubt , when I switched on the points it only appeared on the top and bottom of the loft , mine didn’t have any in the center.. is there a reason why ?
maybe to try rebuild and make sure degree is 3
Cool....Cool....!!
Thanks
Thank you sir
You are very welcome!
Thanx
No problem
Amazing....!
Thanks, Alejandro. Cannot wait to see you use this method to build something.
@@PJChenJewelryDesign you' ll see....soon ..thxs
hello sir pls help how did you render this looking so real. . . .
I use Keyshot for rendering.
Sir plz Make a video of making a necklace
what kind of necklace?
@@PJChenJewelryDesign basic round necklace
How to use this model for product manufacturing just as inventor and fusion360
Rhino doesn't have that function. Does anyone in this channel have better tips on this question?
I just want gold effect (color) on object sir
Supper
Super
what is that showing in starting of video front right side - ,,,, 14K , 18K, 22K, 24K, ????? And Near this polish, hamered, glass, gem?????
I have RhinoGold plugin. that is the preset rendering. I do use Keyshot App for my rendering. they have pretty good library for jewelry materials.
@@PJChenJewelryDesign rhino gold softwarehow can i download???
Can you show tutorials of rhino gold from start to end (basic) that i can understand easily
@@PJChenJewelryDesign can you show it as through video,,,,, how did take it??
ur just scale the inner shell in 2d, so it will be outside the inner one.
Thanks for the degree issue..
That is cool, isn't it!
Yes yes
PJ, are you ok? I hope you're well. What can I say about your tutorials? Show, perfect, sensational. My sincere thanks. Thank you, always. Success for you.
Thank you Gabriel!!