BBoyDrkNova the h2b kit is for the base modle h22a it wont work with the sh h22 because the bellhousing side of the block is a different casting in order to accept the atts trans!
I'm soon to start a h2b swap on my em1 by any chance did u run into any major issue with the motor or anything like that or the qsd kit breaking on you anything? thank you
+dayadam16 Its actually rebuilt H22 it has blox type bs cams, but the stock intake manifold and 2.25 piping really restricts this monster. I really wanna see her breathe with my skunk 70mm tb and skunk 2 manifold I just got. I'll let you know once I tune it what numbers shes putting out.
+Alome Chanthasinh Sorry man. I sold this car, but i'm currently building a Built LS vtec for my hatch. I'll be racing more in 2016 I'll have more coming soon.
+mrslapside really? Cause i have a friend with a h22a and weve been tryna find a good sounding exhaust that doesnt sound like shit ive seen most people go with either yonaka or vibrant muffler with madrel bends
+dayadam16 220. I was aiming for 235 ish with my new skunk 2 manifold and tb I was gonna slap with full exaust, but I won't be able to tune until end of year. I"m kind of focusing on my k20 hatch. I love my H series though! H2b is one of the easiest ways to compete with the 12 second cars.
I wouldn't say ghetto, more like someone has some really stiff mounts or a engine/Trans combo that really rips gears. Jerks the combination switch on the wiper.
+Chodius Maximus 1994 running long OEM h23a1 transmission. yes I have mods. valve train/big cams, OEM ported manifold ,injectors and full bolt ons,3 inch exhaust tuned in AEM ems. I had this identical motor in a f2b eg setup with a b16 I added a Mfactroy 4.92 final. smoke evos and wrx all day long and ran with high boost turbo cars pretty good.
Wow VTEC cracks hard on this
my mans holding the wipers lmao, this is why i love hondas, they each have their own character
😂😂 true!
i'm currently putting an h22a in my EG hatch and i was just looking for some fun videos lol
Trent Szopinski it’ll pull hard for sure
Buddies havin a blast in a car is a win ... v8 4cy who caresvtheyr laughin and havin fun
Man I miss driving my h2b ek daily... I went stock jdm GSR and it feels like a single cam compared to the torquey h22..
Man, I'm actually planning on getting the h22 from a 2001 prelude sh , and slapping on the gsr lsd onto my Ek sedan . Funna be fun pulling in my car .
hell yeah
BBoyDrkNova that wont work!
v6 ftmfl why not?
BBoyDrkNova the h2b kit is for the base modle h22a it wont work with the sh h22 because the bellhousing side of the block is a different casting in order to accept the atts trans!
I'm going to tag Cheatum In this and hes going to go get yall 😂😂😂😂. That is a super clean engine bay.
Andrew DeVille thanks cheatum likes hondas? Haha
@@mrslapside Cheatum is a cop lol. Hes the busta lol
Andrew DeVille haha damn nice
Def. Needs tuning.
What OBD1 distributor did you use on your h-2b swap in your EK spray clean set up to
I've got an h2b em1.. bur Jesus you can't hear my vtec like that. how is it so loud
Nick Mcmasters what kind of map are you running?
i hahe a 70 mm tb butterflies removed and high-end header 2.3 exhaust and 197whp
+dayadam16 I aiming for 230+ with small exaust. I'll post it up in future.
granny shifting
Shifting fine...
i habe a built ls in a 93 eg Si i would of traded you lol, clean asf to
wipers kicked in yo!
celso croissier tadeo vtec got him excited
@@mrslapside Yeah! xD
Please someonr post the timr he did a pull
Low 12s car we sold it awhile back though
I'm soon to start a h2b swap on my em1 by any chance did u run into any major issue with the motor or anything like that or the qsd kit breaking on you anything? thank you
nope
thanks for the fast response and what kinda h22? An stock internal?
looks fun! thinking about doing this swap in a 99 coupe. how did the swap go? what kit did you use?, any issues?
+kdbI990 I def recommend it! PLM kit
mrslapside wat about them non arp fly wheel bolts that don’t come with the plm h2b kit ???
so beast
lol damn wipers
Why in the comments doe it day stock h2b? Is it stock or built with internals?
How can I get my H22 to be this loud? The engine sound is so much better than exhaust
This h22 had stuff done to the head like cams. The tune could of been better though. I miss this car
Do u have to beat the frame rail
nice h2b civic coupe coupe bolt ons 0-100
Athao Thao thanks
no cams right?, what kind of manifold and what's your exhaust setup I was thinking of going to a 3 inch currently it's a 2.3 so not even 2.5
+dayadam16 Its actually rebuilt H22 it has blox type bs cams, but the stock intake manifold and 2.25 piping really restricts this monster. I really wanna see her breathe with my skunk 70mm tb and skunk 2 manifold I just got. I'll let you know once I tune it what numbers shes putting out.
+dayadam16 BTW go 3 inch for sure with new tune, but honestly it'll be a bit loud hahah so be careful with creating attention.
bro, when are you going to make more videos?
+Alome Chanthasinh Sorry man. I sold this car, but i'm currently building a Built LS vtec for my hatch. I'll be racing more in 2016 I'll have more coming soon.
Did u relocate the fuel filter?
How much hp u made??
Daniel Diez never got to retune it before I sold it.
I'm doing a h2b h23a swap in my bubble any advise to make my experience easier ?
Just a little bit of studying and have all parts ready. H23 gonna rip bro! good luck.
+mrslapside thanks bro
Does this motor have forged pistons and rods. Sounds like it?
Gsr Turbo wow you know your stuff yup it’s rebuilt internals, but the tranny and tune was asssss
Gsr Turbo it had so much potential
@@mrslapside only reason I know because I have forged internals very similar sound if not then same.
How many miles on it since forged internal rebuild?
Gsr Turbo Yee
What trans?
What ecu are you running? How did you get the vtec hooked up?
crome
are you still running the stock radiator and fan?
Errol Morris sold it awhile back I think she still is though
Sr20 all day in the sentra
It's all preference really
Scrap
I'd defs go with Sr20 if you wanna drive slow.
Trust me I've had both cars an the H22a was far superior in everyway.
That’s why u bulit high compression sr20de to be fast 12 sec car
is this the car on craigslist??? in union city?
+Nicky Singkhoumkhong yup
what spec is your h22? also what ecu are you running?
type s with built bottom end I sold it and miss it now =(
Sick car man ! I have a very similar setup 95 H2b coupe with bolt ons untuned take a look at my video
Can you tell me what exhaust setup you have?
just 2 and quart piping it was actually choking
+mrslapside really? Cause i have a friend with a h22a and weve been tryna find a good sounding exhaust that doesnt sound like shit ive seen most people go with either yonaka or vibrant muffler with madrel bends
Go with a yonaka exaust sounds very nice a not all farty.
+mrslapside yeah thats what were going for to get out the deep sound and not make it sound like bees but would you reccomend 2.50 or 2.75??
Integras_420 gonna depend on your set up i'm using 2.6 on my integra ls v and its pretty good
3 people in a allmotor setup should feel pretty slow
Pacific777 yeah too much weight haha
Pacific777 I agree though it’s all for the love of motors and driving.
Riding 3 deep with 2 friends, everyone's smiling and laughing. Doesn't always have to be about how fast it is lol
Its cracking hard because it's not tuned lol
Anthony Hernandez haha hard not smooth the tune 😂
how much does your setup put down?
+dayadam16 220. I was aiming for 235 ish with my new skunk 2 manifold and tb I was gonna slap with full exaust, but I won't be able to tune until end of year. I"m kind of focusing on my k20 hatch.
I love my H series though! H2b is one of the easiest ways to compete with the 12 second cars.
mrslapside you have an insta or facebook account for some h2b info details, if you don t mind of course
whats the passenger fuckin with ?
Wiper
What do you mean lol
I wouldn't say ghetto, more like someone has some really stiff mounts or a engine/Trans combo that really rips gears. Jerks the combination switch on the wiper.
Hey what's up. What map are you running in order to get that vtec to kick in and sound like that? Sounds aggressive as fuck lol
Pierre Espinel haha just piping plus motor was built the block
Cam gears can also make it more aggressive sounding.
Buttered Toast yup this motor was actually slightly built just needed a better tune
Did you do any frame rial work ? Did the pulley or alternator hit the frame rail?
+kah vang Yup different fuel filter. I banged the frame rail a bit for my pulley and just ran alternator relocator kit.
+kah vang I sold the whole car for 5500 I kind of miss it haha
What harness?
e82 135i si
mrslapside did you have to change anything on the harness?
can a h2b civic and integra beat a stock sti and wrx?
+Chodius Maximus Depends on which STI. Hondas are not really good on street tires where wrx are awersome on street tires because of all wheel drive.
my prelude f20b beats them and evos.
+f2b.....f20bEG Any mods done to your car? What year prelude?
+Chodius Maximus 1994 running long OEM h23a1 transmission.
yes I have mods. valve train/big cams, OEM ported manifold ,injectors and full bolt ons,3 inch exhaust tuned in AEM ems.
I had this identical motor in a f2b eg setup with a b16 I added a Mfactroy 4.92 final.
smoke evos and wrx all day long and ran with high boost turbo cars pretty good.
f2b.....f20bEG That's pretty fast on the highway?
Not really" lol
Slow
What kind of axles you have on ?
b series stock
What tires are you running ??
Gabriel Soto steeet tires I forgot which brand. I think it was a Japanese brand.