LG washing machine F1222TD turning on ok, but start button and some others not responding. Programme Select dial and a couple of other buttons work ok.
I had the same issue with my machine. Initially I thought that there wd be a minor issue which might subside by itself. But I had to go through various fora to find the solution. Most of the sites were not good enough to help me out with the solution.Finally, I did the following : 1. unplugged the machine 2. removed the top cover 3.removed the front panel that has switches and controls 4. Unscrewed the entire logic board from the plastic hub 5. Then, separated the Front PCB which as all the LED and switches from the logic panel 6. There I found out that some of the tracks were bad due to water seepage 7. I rubbed those tracks and checked them for a continuity with the help of a multi meter 8. upon ensuring the continuity in the tracks, I replaced the panel and IT WORKED Hope that if you guys have basic technical knowhow, you wd be able to mend the machine. And for those, who are not that technical may get aware that they do not have to be fooled by the company guy who might over charge them for a little issue. Thanks for reading. Cheers!
Hi Thanks for the info. I did that on a washer, which had that same problem. It worked,after the first wash it stop working again. have the same problem. What can I do
@@ch.sowjanyasowji4895 where do you stay? If in Delhi - you can visit turakman Gate area where you can get the logic panel boards in the range of thousand rupees. The machines which get rusted and decomposed arrive at these kabadi walas where you can get 100 percent working logic boards. Good luck
Had exactly the same problem, start button did not work, opened the top( two screws at the back) disconnected and connected all plugs inside which are in the front panel and it works again💪😎
I had the same issue for months and technician couldn't identify the issue. The solution is simple. The bottom row, 3 buttons share the same negative. Also this line connect to the main chip pin 1. Check this line to the pin 1 with multimeter. Mostly the pcb track will be corroded. Use jumper cable or re-track the pcb should solve the issue.
@daniel equere I am not proficient in explaining PCB's but will try. The jog dial selector led (quick wash, bulky,s rinse & spin ) in my machine is connected to the program (start/pause) button. If you can back trace the circuit (start/pause) button it will lead to the main IC pin. Try to do a continuity test from the micro switch to the IC pin. It should offer 0 resistance. If not mostly the LED mounted in that path is the culprit. Solution is bridge those led with a copper wire and test. The pcb traces are of very poor quality with no environmental protection. It is designed to fail. When you tried to solder copper pads will lift from the board. Another failure area is the drum spider arm. I have replaced with after market stainless-steel spider. Its all working good now. No need of replacement machine atleast for few years
this issue can fix 100% .this problem occurs starting from defect led bulbs.get multimeter and check all leds and diodes forward bias and reverse bias, find the problem and replace new one
my washing machine gets pause every 10-15 mins.. i have to pause and play it again to run... but it took me whole day to wash one time of clothes.. anyone please help.. what could be the problem
Did this suddenly happen, or was it gradually beginning and getting worse over time until it got to the state it's in now? We are having to fight with the start/pause button, and now the soil level and spin speed buttons are not responding until after you press them repeatedly.
@@stevecabrelnguepsi I took off the top cover I disconnected the connectors and reconnected That's how I actually reset the system And everything is back to work
Same issue - but ours won't turn on all the time. Very unpredictable - ordered new machine, and then the old one started working again day before delivery of new one!? I'm going to remove the front panel to check connections. The screws to do this are located where the powder dispenser is, remove drawer and you'll see 2 screws. This enables the whole front panel to be lifted off.
I would suggest a sledgehammer, which start in price from $20 depending on the size you're after. By all accounts and other people's reviews they tend to do the job pretty well. take care
I bought my 5kg front loader washing machine 2years ago. it worked fine until recently that the start button does not respond.what else can one do about it? we called repairer to check it, said it will cost as much as what it cost to buy a new one.
I had the same issue with my machine .I open the main power supply board released all cables jackes then I repack and my problem is solved ....my machine is ruining fine and good ....try it
I had the same issue. Checked the drainage - not clogged. I removed the top cover by unscrewing two screws on the upper back left & right, then sliding it backwards. I disconnected and reconnected all the jacks I could see there, and boom - the washing machine's working again properly.
Ok here is the solution it's mean the water went inside the start button try to use hairdryer up on this button that the hot air should go inside the button for 5 minutes keep use it and after turn of machine for 2 minutes and then start hopefully will work it.
I had same problem, opened up the drainage flap ( front, bottom, right hand side) and was full of water, possible blockage but worked fine after I emptied it. P.s get a towel ready before opening!!!
the problem is the moisture. moisture makes problem to pcb board. must always the washing machine be covered when you are ...working with water in the same room (bathing e.t.c.)
Ma solution: Après plusieurs jours de tentatives (remontage + démontage du panneau de commande) sans succès ! J'ai démonté le panneau supérieur, secoué les fils (j'étais énervé) du connecteur en haut à gauche en appuyant sur le bouton démarrer !! le cycle de lavage a démarré , mais ils y avait un bip discontinu (faux contact due a l'humidité ??!!) ; j'ai posé une couverture par dessus la machine pour que tout chauffe et sèche, puis plus de bips !!!! jusqu'à ce jour tout fonctionne correctement *comme au premier jour d'achat* !!!! c'était un hasard certes, je ne sais pas si ca marchera pour autre personne, mais pour moi ce fut le cas.
@@samasenis 640/5000 My solution: After several days of attempts (reassembly + dismantling of the control panel) without success! I took the top panel apart, shook the wires (I was pissed off) from the top left connector by pressing the start button !! the washing cycle started, but there was a discontinuous beep (poor contact due to humidity ?? !!); I put a blanket on top of the machine to heat and dry everything, then no more beeps !!!! to this day everything works correctly as on the first day of purchase !!!! it was a fluke, I don't know if it will work for someone else, but for me it did.
I would like to know what happened to my washing machine when I turn on washing machine and then the home power main switch is called Protected power turn off automatically. I don’t know why. I think it might be something wrong with the washing machine but I don’t know which one?
Solved! I had this exact same problem on a newer version of this unit at the apartments I manage. It was just a stuck button! As I was pressing buttons and just trying to get things to work (and waiting on hold with LG) I noticed that the add garments button would not depress. I fiddled with it until I got it back in line so that I could depress it and it fixed the problem! The circuit board behind the buttons may just be getting slightly displaced when this happens.
Jacob Studer thank you!!!! Just had the same issue as the guy in the video and saw your comment. I had already done what felt like 100 hard resets, and nothing worked. And here is your comment and I was like, can’t hurt to check, and sure enough same button was stuck on our machine! 😊👍
why the so many dislikes, the door was shut fine, and the machine will still start with the door open anyway, obviously check all connections in the diplay board are in place, if they are, check the buttons them selfs. if they are ok, check the board, its likely the option board would need to be replaced
LG is one of the worst brand in this world .I brought AC and washing machine both are not working with in 4 years ...also LG service centre can't help me
Am Technician . Sem problem my Costemer Home 🏠 at samsung top lod fully Automatic Whashing Machin . PCB not output AC power Water inlet valv . PCB problem
i had the similar issue on 6th year, this is because of door lock sensor. clean the locking lever area, close the door gently, if not, call the authorized service center and rightly mention the issue to avoid major expenses.
Mouth breather push button! Ugg it no work. Mouth breather push more button. It still no work. Mouth breather push buttons again maybe it work now. Now mouth breather getting mad, push buttons harder....
Hi there. sorry guys for all those comments but there seems to be a standard problem with LG because we are experiencing the same problem with a similar LG direct drive model = F1056QDP5 So we presume that the contacts must have corroded over a 5 year period of time Funny thing - the engine has 10 years warranty but the contacts make it only half the life span ;-) Any ideas how to open the front in order to check and refurbish the contacts? Thanks in advance - T
Prashila Feser i know you wrote it a while ago but remove detergent box you will see two screws there and behind the machine where the top lid is you will see two or even more screws undo those and you can take out panel.
Before you remove front control panel, you need to unscrew two screws in the upper right and left side of the back of the machine. You need to take out the upper cover of the machine first, so unscrew those two screws, then push the top cover to the back. This will give you room to take out the front panel. Then unscrew the detergent screws (two). Now it's easier to remove the front control panel.
ok i use to test all the displace bulb and chance the blond once and it will work for about three or more day and then stop again. just about 30% work well. the bulb can be lighting but has blond use a multimeter on continuity and test. it light deeply when it ok.
People the guy showing the problem of an LG washing machine but not showing the fix If all washing machine components are ok then It is not child lock the one that is qualified electronics expert can isolate the problem by inspecting the display board for damaged lines on pcb from water if everything is ok then the mcu is defected from static discharge . Means u need a programmed mcg or change all the board . Thank you
I had the same issue with my machine. Initially I thought that there wd be a minor issue which might subside by itself. But I had to go through various fora to find the solution. Most of the sites were not good enough to help me out with the solution.Finally, I did the following :
1. unplugged the machine
2. removed the top cover
3.removed the front panel that has switches and controls
4. Unscrewed the entire logic board from the plastic hub
5. Then, separated the Front PCB which as all the LED and switches from the logic panel
6. There I found out that some of the tracks were bad due to water seepage
7. I rubbed those tracks and checked them for a continuity with the help of a multi meter
8. upon ensuring the continuity in the tracks, I replaced the panel and IT WORKED
Hope that if you guys have basic technical knowhow, you wd be able to mend the machine. And for those, who are not that technical may get aware that they do not have to be fooled by the company guy who might over charge them for a little issue.
Thanks for reading.
Cheers!
Hi
Thanks for the info.
I did that on a washer, which had that same problem.
It worked,after the first wash it stop working again. have the same problem.
What can I do
Monis Kamal
Yes bro 2times I changed my PCb again I am getting same problem and also they are charged much
@@ch.sowjanyasowji4895 where do you stay? If in Delhi - you can visit turakman Gate area where you can get the logic panel boards in the range of thousand rupees. The machines which get rusted and decomposed arrive at these kabadi walas where you can get 100 percent working logic boards. Good luck
@@moniskamal okay thank you for your valuable information,but we are from south bro
Had exactly the same problem, start button did not work, opened the top( two screws at the back) disconnected and connected all plugs inside which are in the front panel and it works again💪😎
J’ai le même problème comment faire alors
Thank you, did tue same and it worked !!!
@@handanovicalameldine1381 I'm glad to help you💪 wish you all the best, my is still working.
I had the same issue for months and technician couldn't identify the issue. The solution is simple. The bottom row, 3 buttons share the same negative. Also this line connect to the main chip pin 1. Check this line to the pin 1 with multimeter. Mostly the pcb track will be corroded. Use jumper cable or re-track the pcb should solve the issue.
@daniel equere I am not proficient in explaining PCB's but will try. The jog dial selector led (quick wash, bulky,s rinse & spin ) in my machine is connected to the program (start/pause) button. If you can back trace the circuit (start/pause) button it will lead to the main IC pin. Try to do a continuity test from the micro switch to the IC pin. It should offer 0 resistance. If not mostly the LED mounted in that path is the culprit. Solution is bridge those led with a copper wire and test. The pcb traces are of very poor quality with no environmental protection. It is designed to fail. When you tried to solder copper pads will lift from the board. Another failure area is the drum spider arm. I have replaced with after market stainless-steel spider. Its all working good now. No need of replacement machine atleast for few years
this issue can fix 100% .this problem occurs starting from defect led bulbs.get multimeter and check all leds and diodes forward bias and reverse bias, find the problem and replace new one
I have the same issue. Rather than the defect its the trace of the PCB
This vid is a waste of time. Just guy pushing buttons with no solution. Save yourself time and move on
I had teh same problem, was a led in short circuit, i remove it and works just fine
Thanks a lot . I have the same problem . And it was a led that illuminate little . I just remove it . It work fine.
@@rayanteguia3865 @Hélder Rei can you elaborate how you solved the issue
I did it and it worked, thank you very much 👍
my washing machine gets pause every 10-15 mins.. i have to pause and play it again to run... but it took me whole day to wash one time of clothes.. anyone please help.. what could be the problem
Thanks for teaching us nothing.
Did this suddenly happen, or was it gradually beginning and getting worse over time until it got to the state it's in now? We are having to fight with the start/pause button, and now the soil level and spin speed buttons are not responding until after you press them repeatedly.
I did it and it worked, thank you very much 👍
how did you solve your problem?
@@stevecabrelnguepsi I took off the top cover
I disconnected the connectors and reconnected
That's how I actually reset the system
And everything is back to work
NASA can use a guy like you. Remove the video so people don't waste their time!!!
what was the trouble? How did you fix it?
Same issue - but ours won't turn on all the time. Very unpredictable - ordered new machine, and then the old one started working again day before delivery of new one!? I'm going to remove the front panel to check connections. The screws to do this are located where the powder dispenser is, remove drawer and you'll see 2 screws. This enables the whole front panel to be lifted off.
Good now you have two. The old one might need some company
I also saw the door lock indicator flash as soon as you switched the washing machine on
Le problème est que la porte n'est pas fermée. Le contacte ne se fait pas. Il faut tout simplement règler le problème du contacte en le changent.
@youcefmeghaizerou605 it seems like a control board/ ui problem, because he couldn't change some of the settings.
I would suggest a sledgehammer, which start in price from $20 depending on the size you're after. By all accounts and other people's reviews they tend to do the job pretty well.
take care
manteeification i laughed so hard 😂😂😂😂😂😂
I have a question if a washing machine has a play/pause button does that mean it is digital? Please I need an answer.
DIGITAL IS MOTOR. PLAY PAUSE BUTTON IS A BUTTON ON EVERY WASHER
I bought my 5kg front loader washing machine 2years ago. it worked fine
until recently that the start button does not respond.what else can one
do about it? we called repairer to check it, said it will cost as much
as what it cost to buy a new one.
I could help you but i read your message after 7years,hopefully you have bought a new washing machine 😊😊😅
Button not working
Start Pause
Spin
Temperature
Crease care
exactly the same issue. How did you solve it......without the oficial technician.....
Just reset it n it works
I had the same issue with my machine .I open the main power supply board released all cables jackes then I repack and my problem is solved ....my machine is ruining fine and good ....try it
Thank you, I made like you and solved the problem
Can you explain briefly please mine start button is not working do.i have to open the button panels
@Su Ya Rouhola tried all this way still not able to start
I had the same issue. Checked the drainage - not clogged. I removed the top cover by unscrewing two screws on the upper back left & right, then sliding it backwards. I disconnected and reconnected all the jacks I could see there, and boom - the washing machine's working again properly.
Qui a trouver une solution pour cette panne?
Ok here is the solution it's mean the water went inside the start button try to use hairdryer up on this button that the hot air should go inside the button for 5 minutes keep use it and after turn of machine for 2 minutes and then start hopefully will work it.
الغسالة متعتي زي إلي عندك لما تخرج الماء تعمل حس كثير ماهو السبب
اl have same problem the solution is changing pc board no 1 behind starting button
Or cleaning board by cleaner from moisture and salts
i have same problem how it slove? when i pressed any button time changed not spining,, help me i can send video
Press spin n temp with on button to reset it. Shud b ok
yes I think also a doorlock sensor ... you see no red lock icon on display.
It's door lock problem, press it little hard
It is childlock
I had same problem, opened up the drainage flap ( front, bottom, right hand side) and was full of water, possible blockage but worked fine after I emptied it. P.s get a towel ready before opening!!!
+1, worked like a charm, afterwards!
Thank you so much I also solved my problem by following your advice😊
the problem is the moisture. moisture makes problem to pcb board. must always the washing machine be covered when you are ...working with water in the same room (bathing e.t.c.)
vasilis papadopoulos the
Press more buttoms to get the wasmachine get started ...... some machines have need time to start
Ma solution: Après plusieurs jours de tentatives (remontage + démontage du panneau de commande) sans succès ! J'ai démonté le panneau supérieur, secoué les fils (j'étais énervé) du connecteur en haut à gauche en appuyant sur le bouton démarrer !! le cycle de lavage a démarré , mais ils y avait un bip discontinu (faux contact due a l'humidité ??!!) ; j'ai posé une couverture par dessus la machine pour que tout chauffe et sèche, puis plus de bips !!!! jusqu'à ce jour tout fonctionne correctement *comme au premier jour d'achat* !!!! c'était un hasard certes, je ne sais pas si ca marchera pour autre personne, mais pour moi ce fut le cas.
What
How was it solved. Translate in english
@@samasenis 640/5000
My solution: After several days of attempts (reassembly + dismantling of the control panel) without success! I took the top panel apart, shook the wires (I was pissed off) from the top left connector by pressing the start button !! the washing cycle started, but there was a discontinuous beep (poor contact due to humidity ?? !!); I put a blanket on top of the machine to heat and dry everything, then no more beeps !!!! to this day everything works correctly as on the first day of purchase !!!! it was a fluke, I don't know if it will work for someone else, but for me it did.
I would like to know what happened to my washing machine when I turn on washing machine and then the home power main switch is called Protected power turn off automatically. I don’t know why. I think it might be something wrong with the washing machine but I don’t know which one?
Same us our washer.. I fix it and figure out what is the problem its about the electronics supply
How to fix this?i have thesame issue😓
Try resetting it. Press spin n temp when switching it on.
@@aizihairin6929 after pressing that what esle should do?
@@olufisayooluseyi6511 Press run it should work
lg washing machine power is on but timer is not working
Pls solve
Solved! I had this exact same problem on a newer version of this unit at the apartments I manage. It was just a stuck button! As I was pressing buttons and just trying to get things to work (and waiting on hold with LG) I noticed that the add garments button would not depress. I fiddled with it until I got it back in line so that I could depress it and it fixed the problem! The circuit board behind the buttons may just be getting slightly displaced when this happens.
Jacob Studer thank you!!!! Just had the same issue as the guy in the video and saw your comment. I had already done what felt like 100 hard resets, and nothing worked. And here is your comment and I was like, can’t hurt to check, and sure enough same button was stuck on our machine! 😊👍
@@elisalarson1455 awesome 😄
why the so many dislikes, the door was shut fine, and the machine will still start with the door open anyway, obviously check all connections in the diplay board are in place, if they are, check the buttons them selfs. if they are ok, check the board, its likely the option board would need to be replaced
Washing power is on. But timer is not getting on..unable to select preferable mode also...pls solve
LG is one of the worst brand in this world .I brought AC and washing machine both are not working with in 4 years ...also LG service centre can't help me
Am Technician . Sem problem my Costemer Home 🏠 at samsung top lod fully Automatic Whashing Machin . PCB not output AC power Water inlet valv . PCB problem
J'ai le même problème j'ai pas compris ?
Why is the washing machine llg not starring 🤔🤔🤔
i had the similar issue on 6th year, this is because of door lock sensor. clean the locking lever area, close the door gently, if not, call the authorized service center and rightly mention the issue to avoid major expenses.
Anantha R this is the correct solution. Thanks a lot good human
Ремонтировать кнопки и замок.
Timed Delay On?
Richard Holloway if time delay would be on the machine would start and lock and after time delay the machine would start to wash
i have the same problem now....how can i solve this without any technician
Shahna k hameed turn cycle knob few time fully around should work
Push medic rinse and pre wash fir 3 seconds
SIR Antony gaarick pls solve
i have the same and problem solved by removing inertial cables
which ones, mine has stoped working too.
Can you say I detail about how to do
The problem solve with new board you must be change that funny part
You must be play with dall or help clean de house machine is not a toy
My machine cannot start so how is the solution what am I supposed to do is LG
Abhi just huye kia krna padaiga
i am having same problem now
Mouth breather push button! Ugg it no work. Mouth breather push more button. It still no work. Mouth breather push buttons again maybe it work now. Now mouth breather getting mad, push buttons harder....
Sir,dispenser drawer is not taking the detergent inside
Jyothi Sudha Pothuri then something is wrong with ur water or those water inlet valves
probably inlet filters need cleaning
Same brand of my washer/spinner...but all settings wont work anymore...just a piece of crap
i solved the same problem. i turned the big dial completely then click start. then it started
Thanks! This worked for me too. Spun the dial around fully a few times and then it would start.
Claudia Jabonillo you are the man! Its really work!
You save me a lot of $
Thanks....I've turned the nob few more times n it's working now
which is big dial
What is big dial what you think ?
J’ai le même problème actuellement je sais plus quoi faire c’est énervant
Same problem my machine plis solution
If your LG washer is turned on but no buttons respond to pressing, buy a new washer or call the LG customer information center
Кнопка пуск не работала очистить очистить контакты
У них всегда почти ломается датчик холла! Подпишемся?
washer and dryer lg front load 9 /5kg AE error code
maybe bcoz there is no load and no water
Medic Rinse and intensive problem how to solve
I also have same problem
How to solve u
I have same problem.
У меня такая же стиральная машина серого цвета, только не на 8 кг, а на 4 кг.
Lg should find this problem solution otherwise......
Hey kabuli
I solved same issue by replacing display panel only
Bhai mera bhi abhi just hawa hai kia krna padega
Plz bol dijiaye
@@masstiisong5174 how I can help 🙂
How to repaired
Circuit problem... 100%
Hi there. sorry guys for all those comments but there seems to be a standard problem with LG because we are experiencing the same problem with a similar LG direct drive model = F1056QDP5
So we presume that the contacts must have corroded over a 5 year period of time
Funny thing - the engine has 10 years warranty but the contacts make it only half the life span ;-)
Any ideas how to open the front in order to check and refurbish the contacts?
Thanks in advance - T
Prashila Feser i know you wrote it a while ago but remove detergent box you will see two screws there and behind the machine where the top lid is you will see two or even more screws undo those and you can take out panel.
Before you remove front control panel, you need to unscrew two screws in the upper right and left side of the back of the machine. You need to take out the upper cover of the machine first, so unscrew those two screws, then push the top cover to the back. This will give you room to take out the front panel. Then unscrew the detergent screws (two).
Now it's easier to remove the front control panel.
same problem with me
pleeeeeeeeeeeeeeeeeeese help me
Same issue here.. found error into electronic circuit...need to replace crystal oscillator.. check it into circuit...
LG is crap and I am buying a speed queen tc5
Sped blablaeen is crap but not LG LG is Best
same problem tsk
1:39 1:39 1:39 1:39 1:39 1:39
whatta?
Gerardo Gutierrez it would blink CL
Start not working
LG inverter drect drive 75 kg chalte chalte stop ho jati hai..
Jaam Bhai any solution pata lag gaya. Mera bhi ohi haal hai. 3 months huwa machine kharide huye.
😊❤🎉
Знімки блокировку від дітей зажми дві верхні горизонтальні кнопки і потримай
It is probably a bad door lock sensor, it acts like you didn't close the door.
mecu57 no the machine would start even tho the door is not locked my machine of my door is open it tries 3 times to lock if it cant it signals that.
Indian Hindi video please 🙏❤️
Where would you have washed your clothes at with no washing machine
Check door
wait of time bad
Scam
شاید برد لباسشویی خرابه.
you have to change the ic control for a front panel
which ic? and how i trace it?
you have to change a front panel complete
ic not enough
i tried to change the ic but doesn't work
ok
i use to test all the displace bulb and chance the blond once and it will work for about three or more day and then stop again.
just about 30% work well.
the bulb can be lighting but has blond
use a multimeter on continuity and test.
it light deeply when it ok.
Child lock
me tooTT
que raro
Its broken haha
Just like you
Same issue with brand new LG washer WM3670HWA. Issue started on Day 1.
Emi B. What did u do? How was it solved. Plz any solution. I also purchased 3 months ago facing same problem
child lock maybe?
...
Check but nothing
People the guy showing the problem of an LG washing machine but not showing the fix
If all washing machine components are ok then
It is not child lock the one that is qualified electronics expert can isolate the problem by inspecting the display board for damaged lines on pcb from water if everything is ok then the mcu is defected from static discharge .
Means u need a programmed mcg or change all the board .
Thank you
This vid is a waste of time. Just guy pushing buttons with no solution. Save yourself time and move on