I tried this but couldn't figure out the right screws, so I propped it up using some thicker lugnuts around the four clips :P Thank you for this video, it made me do it! Dope Fit btw, you got me looking at exhaust and wheels now.
Plastic prying tools, like the tools for opening a cellphone, might work for this and make it a little more peace of mind than using a screw driver. Maybe trim removal tools.
Actually you only need 2 which is the 2 at the end the 2 middle ones go in deeper than 2 at the end..and also you'll need 2 longer screws for the top cause the original ones will not catch if you use a longer screw..I used a 1/4 diameter by 1 1/4 inch screw to lift it up..but be careful not to break the catch screw wholes on the top they break easily but you should be good if only one breaks mine is held on by one but it's fine just give a good tugging to make sure it's nice and tight
Such a good idea man! Will hopefully be doing this, this week sometime. Do you have a recommended website for wheels? I really like the ones you have on
@@tonythecarfreak wait what lol? How did you do that lol? I've received a message from you a while back about you selling the fit and that you regretted it lol.
What type and size bolts did you use the ones I have around here do not fit
My hero I been trying to mod my Honda for and I felt like I wasn't getting anywhere but saw this , thank u so much
Glad I could help!
What size are those screws and bolt
Gonna do this to my fit ASAP ! Thankyou for this resourceful video🙏🏻
Great explanation and made it so simple for us to understand thank you.
@@cbcluchi9254 thank you for watching glad i could help!
I tried this but couldn't figure out the right screws, so I propped it up using some thicker lugnuts around the four clips :P Thank you for this video, it made me do it! Dope Fit btw, you got me looking at exhaust and wheels now.
Thanks for watching glad I could help man!
Great ideas, but I would recommend always use two nuts on each bolt instead of one - better lock with no movements.
Plastic prying tools, like the tools for opening a cellphone, might work for this and make it a little more peace of mind than using a screw driver. Maybe trim removal tools.
Use a cloth so you don't scratch your paint
*Launches painted part onto concrete*
😂😂😂thing has a lot of pressure at release
Hey! Junior what is the link to get does wheels
Actually you only need 2 which is the 2 at the end the 2 middle ones go in deeper than 2 at the end..and also you'll need 2 longer screws for the top cause the original ones will not catch if you use a longer screw..I used a 1/4 diameter by 1 1/4 inch screw to lift it up..but be careful not to break the catch screw wholes on the top they break easily but you should be good if only one breaks mine is held on by one but it's fine just give a good tugging to make sure it's nice and tight
What I did worked just fine but thanks for the info
Smart and cheap too can't beat that...I like the stock wing on mine
Yes sir! Thanks for watching!
Thanks for the tip bro! Will be doing this when I re clear my wing 👏
hiiiii i like your tail light. i also have honda fit. where did you bought your tail light??? Thank you!
They are stock taillights thank you!
yours might be the ge6 1.3. it’s tail light is different
Hola que zise son tus rines por favor
What exhaust do you have on the beautiful machine?
Thank you, it's just a muffler delete to dual DC sport tips!
You think this method will also work on 07-08 Honda Fit Sport (GD3) they come with spoiler from factory as well, Thanks
If I told you I knew I'd be lying! But doesn't hurt to give it a try!! Just becareful with damaging the paint
I have a 07 honda fit would it work like your car
To be honest I'm not sure but you can give it a shot
any issues with the wing moving around going over bumps or on the highway?
No not at all
Could you tell me what kind of exhaust do you have ?
It's a muffler delete, to dual 2.5 inch tips
What kind of wheels are those? They look good.
Thanks they are xxr 531
What are the list of parts again?
Screws that fit into that slot and nuts that screw onto the screw
What is the spoiler called and where can I get it
It comes with the sport edition Honda fit
Do you remember the size and length of those bolts?
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt
@@kalidell760 lol thank you I was looking for a comment like this
Add another nut for a lock nut so that it doesn't adjust with vibration.
That's a good tip!
Such a good idea man! Will hopefully be doing this, this week sometime. Do you have a recommended website for wheels? I really like the ones you have on
Thanks, and honestly Fitment industries will be your best bet for wheels
I’m assuming this mod isn’t compatible with the 1st gen fits correct?
If I'm completely honest with you, I'm not too sure about that...
@@tonythecarfreak right on, ty for the reply brotha!🙏🏼
What size is your rims and tires?
15x8 195/50/15
Hi i got the same car and i love ya rims what size ?
Thanks brotha those were 15x8 +35 offset
Didnyour mpg drop at all?
Not at all if anything I got more mpg since I rode slower
Any issues opening the hatch fully ?
No sir , none at all
what size screw did u use?
I honestly don't recall I'm so it was a long time ago. I explained it in the video
@@tonythecarfreak but you didn't explain the size?
@@GK5_ I explained to use the stock one to get a rough estimate. It doesn't have to be exact just snug enough to fit inside the clips
Nice job man! Pretty ingenious to use a bolt/nut combo to prop the wing up. Does it bounce around at all or is it secure?
Not at all it stayed steady for months under high speeds! never had a problem!
@@tonythecarfreak when you say months, is it because it loosens on the long run?
could also look into nylon jam nuts.
@@b_dard I said months because I sold the car months after doing this
Wow that is a pretty nice and easy mod…Thanks for the info 👍🏾
No problem!!
Great video dude, planning on doing this!
Thank you
yo you stay near broward? i got a fit too abit of a fit freak myself @ryerysa
Had to sub cause you on it!
Thanks for the idea but you should consider the rain 😉
I'm sorry but why should I consider the rain? It's been perfectly fine no issues
@@tonythecarfreak those are allot of holes jus wondering if the rain gets in any time at all
i have the same ride. thanks homie from michigan
Awesome video thanks man!
Thank you for watching!
No water going inside the trunk door ?
No sir it was never leaking
@@tonythecarfreak tanks 👍👍👍
This is bad ass bro.
That was good tip bro
Post more Honda Fit 🙏🏼
Sorry I sold the honda fit
that looks siiick
Thank you
Too bad that won't work on a chevy sonic rs lol.
Haha yea I have a lt sonic now
@@tonythecarfreak wait what lol? How did you do that lol? I've received a message from you a while back about you selling the fit and that you regretted it lol.
@@djinkentertainment yea I Regret selling the fit
Thanks 🙏🏼
What are the specs on the long screws?
I know it was long ago but the bolts I used were m5-.80 x 30 and used 2 m5 nuts per bolt