If I'm not incorrect, the silicon washers are mainly to seal mobo cover from moisture ingress. Ofcos it'll also provide a bit of shock protection as well. Far's additional thermal paste, I'm unsure why reapplication is needed. If it isnt overheating, I'd say its not needed but for sure, its good to know if ever temps are excessively high. Thanks for the tip
what was the temperature that you decided to replace this paste? Was the ex30 overheating? What is the voltage of your Ex30 after 100% charge? Is there a problem with the battery?
I save my little powder container to hold screws that I take off. I have all different sized magnetic trays and bowls for that, but they are in the garage with motorcycle stuff
Nice video but you forgot to put the o-rings back on the charging ports under the top cover. Also it it very weird to see a reversed video and see unscrewing going clockwise . loll
If I'm not incorrect, the silicon washers are mainly to seal mobo cover from moisture ingress. Ofcos it'll also provide a bit of shock protection as well. Far's additional thermal paste, I'm unsure why reapplication is needed. If it isnt overheating, I'd say its not needed but for sure, its good to know if ever temps are excessively high. Thanks for the tip
This all started when we had 2 Masters and a Master Pro burn up motherboards and Roger was looking for a cause. This issue turned up as a possibility.
Exactly type of people who would wreck their wheel and blame Begode.
Please keep you hands off euc internals.
what was the temperature that you decided to replace this paste? Was the ex30 overheating? What is the voltage of your Ex30 after 100% charge? Is there a problem with the battery?
My EX30 is fine. Just doing this as a preventive.
He charges to 134.4v. No problems here and looking to keep it that way!
Was it recorded through door peephole?
I don’t understand what problem you fixed? What is a thermal fix?
"I know for sure that this little hole is not my hole" - Dawn, 2023 😝
😂
The little thingies you put in your makeup case?
I save my little powder container to hold screws that I take off. I have all different sized magnetic trays and bowls for that, but they are in the garage with motorcycle stuff
Nice video but you forgot to put the o-rings back on the charging ports under the top cover. Also it it very weird to see a reversed video and see unscrewing going clockwise . loll
Those "thingies" get around don't they 🙂. Always remembering those charge ports are live once you have plugged your battery's in 🙂
What thermal paste did you use
GENNEL G107 100Grams Silver High... www.amazon.com/dp/B019MREC6O?ref=ppx_pop_mob_ap_share
@@DawnSChampion tysm!
@@Jrekt you're welcome!!
Non conductive one, you know. Because it's important for ompletely isolated aluminum plate to not conduct nothing to the frame
👏🏼
Thanks... had just asked that...
poor wheel,
Begode fans trip me out lol.
@Begodecrashtestdummy
So the fun ride is equal to "beer goggles"? Ok lol i got it now 💡
@Begodecrashtestdummy
🤦♂️🤦♂️🤦♂️🤣
You don't understand what are you doing. Omg. Also it's better when stock, but it's holy shit 😂