Hollie im a glock guy, but i just picked up a sig p365 yesterday 2-16-19. The born on date is 1-30-19. You posted this 9 months ago. How has your p365 held up. Any issues ? Thanks.
After 350 rounds on the first day at the range I would definitely suggest trying the grease. I had NO malfunctions. Ran perfectly. About 100 rounds was super cheap reloaded ammo the was brass and aluminum cases mixed in. The clouds that were coming out where HUGE and my P365 is incredibly dirty now. I really hope you will give it a shot, I think you will be happily surprised with the results! I ran federal range ammo, Winchester white box and ultramax bulk ammo(this was the nasty stuff that stopped a LC9, M&P9, and a Glock 19c but ran PERFECTLY in the Sig).
My p365 shoots the Winchester 115 grain very accurate. No jams no problems. Winchester 115 grains is very clean ammo. Everybody should try this gun,its fantastic!
Really..I struggled for literally 5 seconds before I realized to slide the rail back while toggling the takedown lever reassembling.. that was my only hang up...and I'm fairly new gun owner
Jay Beckerich I really like it so far! Only put 60 rounds thru it and No issues of any kind so far. Winchester white box 115 grain JHP and Sig 124 grain V crown hollow points. Nice trigger. Ergonomics are great. Very shootable, quick easy follow up shots. Love the sights. Slide locked back every time it was supposed to. As long as it continues to perform like it did yesterday then I'm a happy guy. Although I paid a little more than I would have liked to, I didn't have to order it and wait. So far so good! Can't wait to get a holster
I also see a fair amount of wear on the left side of chamber , and slide hood. Then again, most of my Sigs wear a lot and fast (except the 320's). BTW Glock gen 5's wear a LOT, too.
Noticeable, but not the head-banging mashing that Harry's Holsters showed on his. For the money Sig's asking, I'd like to see less wear (perhaps a better or thicker coating?), but I don't know how much lube was on the chamber and inside the slide for those 500 rounds. Most impressive is that it's going into battery consistently. I'd love to see that on some other people's reviews coming up. I can wait a little while. Thanks for being our beta tester, Jay. :) -
I put about 100 rounds over the weekend. No problems. I shot 124 gr American Eagle, 124 gr Fiocchi, 124 TMJ Lawman, 115 gr Blazer Brass...My P365 ate all of them without a problem. I shot a little hi at 10 yards. I believe I need to work more on the recoil control. I am very happy with my pistol.
After first time disassembly and assembley while performing the function check, pulling the trigger I hear more of a thud than a click is that normal for this gun? Please reply, thanks.
Good video, I have 500 rd thru mine also without any problems. I'd advise you NOT to put cleaning rod down front of barrel. You don't want to take a chance damaging the Crown. Go RN's !!!
That IS detailed cleaning for me except I spend a wee bit more time on the bolt face, extractor, ejector and feed ramp areas. And, I just have to say, you are NOT my "dream nurse" buddy! Hopefully I don't have a nightmare tonight. lol
Looking forward to your next range time report. Hope you retry the 115 grain with your new grip to see if the 365 is a ammo sensitive..... It is beginning to look like this gun needs a very firm grip and absolutely no pressure on any part of the slide while firing..... Will be watching... .......... .. .............
I sold my Glock 43 got the Sig 365. I like the Sig Way more than the glock 43. My wife also likes it better then her 42 so we are going to buy another one. Good bye Glock my old friend
Hey Jay, I have a question for you man. I am a G43 owner like you and I was just wondering why you had a desire to switch over to the P365? Don't get me wrong, I'm a huge sig lover and personally own 4 of them. I bought the G43 because I loved how it felt, but ended up spending almost the cost of the gun itself tweaking it to my liking. Your thoughts between the two handguns?
I think if you already have it set up how you like it, you can definitely keep that as your EDC! I personally like the 3 extra rounds (I use a +1 base plate, so 7+1) If this sig keeps up with no malfunctions AND if I can get a comfortable holster for it I will be switching over to the Sig. I want to see how much the 12 round magazine adds to the length, if that is not too much I think it would be a no brainer for me.5 more rounds? Id love that. Dont get me wrong, I am not selling the G43, and may still carry it from time to time, it does have a different feel.
I'm doing something similar - I carry a Kahr MK9 (7+1) - If I can have that same package size with 3 more rounds with less weight in a reliable P365, I'm sold. Thanks for your reviews Jay - you seem like a real mellow cool dude!
Jay Beckerich The blackpoint tactical holster by Sig is awesome! The retention is great and there no printing whatsoever with the concealment claw. I know Harry's holster also make options for it now too.www.harrysholsters.com/collections www.sigsauer.com/store/sig-sauer-p365-appendix-carry-holster.html
In my opinion, you actually have quite a bit of barrel and slide wear already. I know you’ve put several hundred rounds through it but the wear seems a little excessive. Glad it was a good range day for you
Jay, Don't worry about excessive wear- looks about right to me. Light grease on metal to metal, and oil on pivot points and springs, and you'll be GTG.
Mike Cook www.ammospy.net will help you find the best deals on ammo out there... I was going to give Freedom Ammunitions a try until I read some bad reviews, and then I decided that I don't want to take a chance of one of my handguns blowing up on me, BECAUSE OF IMPROPERLY PRODUCED AMMUNITION! If you DIDN'T adjust your grip, then you can bet your sweet ass that it wasn't the ammo; it had to do with how much energy was created. Smaller bullet + less gun powder*
Justin Todd I’ll check out that site. Thank you! As for freedom munitions i don’t but the reloads and been through couple thousand 9mm and 55grain 556 combined with no issue. But yea I did adjust my grip.. I am switching from the shield so it’s a little different.
Have you read the user's manual? I doubt it. That's not how they tell you to clean the gun in your user's manual. Why would you post a video that's different than what the engineers put in your user's manual?
Have you tried grease? I use a little bit of rigs grease and it works phenomenally! Here is the product if you are interested 😁www.midwayusa.com/product/1180385501/rig-universal-gun-grease
Also you live in Nebraska? I live in kansas. It be to to come shoot with you sometime! Let me know if you are interested. I'd drive up to shoot with a guy as passionate about guns as I am😁
I'm new to practicing and cleaning my pistol. I couldnt see everything you were doing. I love my P365. Perfect for CWP
Great video, glad you mentioned the take down lever sticking and the slide release catch for getting back to the 6 o'clock position.
Jay, great vid! No nonsense and to the point, git er done.
Haha. I am a nurse! And I just picked up my P365 yesterday. Super excited!
Hollie im a glock guy, but i just picked up a sig p365 yesterday 2-16-19. The born on date is 1-30-19. You posted this 9 months ago. How has your p365 held up. Any issues ? Thanks.
@@jardinero9112 Hello! Yes, it has, though I don't get to shoot much these days. I love my two other Glocks as well.
@@jardinero9112 Do I know you? 🤔
@@pnkrckmom i dont know do you ?
@@jardinero9112 How do you know my name?
Looks well made.
Did great. Thank you for the tip.
Great vid man...love my 365
After 350 rounds on the first day at the range I would definitely suggest trying the grease. I had NO malfunctions. Ran perfectly. About 100 rounds was super cheap reloaded ammo the was brass and aluminum cases mixed in. The clouds that were coming out where HUGE and my P365 is incredibly dirty now. I really hope you will give it a shot, I think you will be happily surprised with the results! I ran federal range ammo, Winchester white box and ultramax bulk ammo(this was the nasty stuff that stopped a LC9, M&P9, and a Glock 19c but ran PERFECTLY in the Sig).
Keaton Ramsdell glad to hear that! Good stuff I may pick some up!
My p365 shoots the Winchester 115 grain very accurate. No jams no problems. Winchester 115 grains is very clean ammo. Everybody should try this gun,its fantastic!
Good job brother.
Good tip about the take down lever, seen a lot of people struggle w/ that. And blame the guns, lol.
p.s. cudos on your career, you do good work. 👍🏼
Really..I struggled for literally 5 seconds before I realized to slide the rail back while toggling the takedown lever reassembling.. that was my only hang up...and I'm fairly new gun owner
Got mine today! Super excited to head to the range
Brandon Pete nice! how did it go?
Jay Beckerich I really like it so far! Only put 60 rounds thru it and No issues of any kind so far. Winchester white box 115 grain JHP and Sig 124 grain V crown hollow points. Nice trigger. Ergonomics are great. Very shootable, quick easy follow up shots. Love the sights. Slide locked back every time it was supposed to. As long as it continues to perform like it did yesterday then I'm a happy guy. Although I paid a little more than I would have liked to, I didn't have to order it and wait. So far so good! Can't wait to get a holster
That's cool you're an emER nurse. I've been to the ER more than my share
+The Triggerati sorry to hear about all the Er visits
Looks easy to clean. Would like to see a full detail strip cleaning in the future to see all the parts. 😉
it is! single take down pin in the rear and the entire group comes out.
Jay. Keep the vids comin. Personally I prefer seal 1 or slip 2000
i have shot mine for the first time at the range yesterday using cheap range ammo with no issues. 40 rounds.
I also see a fair amount of wear on the left side of chamber , and slide hood. Then again, most of my Sigs wear a lot and fast (except the 320's). BTW Glock gen 5's wear a LOT, too.
yea there is some wear, My glocks seem to do the same over time. I am not too concerned about it.
Noticeable, but not the head-banging mashing that Harry's Holsters showed on his. For the money Sig's asking, I'd like to see less wear (perhaps a better or thicker coating?), but I don't know how much lube was on the chamber and inside the slide for those 500 rounds.
Most impressive is that it's going into battery consistently. I'd love to see that on some other people's reviews coming up. I can wait a little while. Thanks for being our beta tester, Jay. :)
-
I put about 100 rounds over the weekend. No problems. I shot 124 gr American Eagle, 124 gr Fiocchi, 124 TMJ Lawman, 115 gr Blazer Brass...My P365 ate all of them without a problem. I shot a little hi at 10 yards. I believe I need to work more on the recoil control. I am very happy with my pistol.
After first time disassembly and assembley while performing the function check, pulling the trigger I hear more of a thud than a click is that normal for this gun? Please reply, thanks.
Good video, I have 500 rd thru mine also without any problems. I'd advise you NOT to put cleaning rod down front of barrel. You don't want to take a chance damaging the Crown. Go RN's !!!
DO NOT use brake on plastic frame guns!! Will melt the plastic parts.
Brake cleaner will melt plastic gun parts
Retired ICU nurse here. Just picked up my P365 and I am not OCD or should it be O.C.D?
C.D.O.
That IS detailed cleaning for me except I spend a wee bit more time on the bolt face, extractor, ejector and feed ramp areas. And, I just have to say, you are NOT my "dream nurse" buddy! Hopefully I don't have a nightmare tonight. lol
So your not gay is what your saying...lmao
So Jay is the 365 sig still ur every day carry or has it changed to something else. G43 or give 26. Or something els???
Andrew Shirley still carrying the 365!
Looking forward to your next range time report. Hope you retry the 115 grain with your new grip to see if the 365 is a ammo sensitive..... It is beginning to look like this gun needs a very firm grip and absolutely no pressure on any part of the slide while firing..... Will be watching... .......... .. .............
I may or may not be on my way back to the range soon!
I did shoot 115 and 124...no problem!
Male nurse here!
I was going to buy one, but I don't know if I want to spend the money on a gun where I'm going to lose five total rounds...
How did you got one so fast do you know people in HIGH places????????
nashwarrick lol, no I literally got lucky. Right place right time.
I sold my Glock 43 got the Sig 365. I like the Sig Way more than the glock 43. My wife also likes it better then her 42 so we are going to buy another one. Good bye Glock my old friend
Hi, i give you a thumbs up but just a word of advice, your camera seems to be very overexposed.
Hey Jay, I have a question for you man. I am a G43 owner like you and I was just wondering why you had a desire to switch over to the P365? Don't get me wrong, I'm a huge sig lover and personally own 4 of them. I bought the G43 because I loved how it felt, but ended up spending almost the cost of the gun itself tweaking it to my liking. Your thoughts between the two handguns?
I think if you already have it set up how you like it, you can definitely keep that as your EDC! I personally like the 3 extra rounds (I use a +1 base plate, so 7+1) If this sig keeps up with no malfunctions AND if I can get a comfortable holster for it I will be switching over to the Sig. I want to see how much the 12 round magazine adds to the length, if that is not too much I think it would be a no brainer for me.5 more rounds? Id love that. Dont get me wrong, I am not selling the G43, and may still carry it from time to time, it does have a different feel.
I'm doing something similar - I carry a Kahr MK9 (7+1) - If I can have that same package size with 3 more rounds with less weight in a reliable P365, I'm sold. Thanks for your reviews Jay - you seem like a real mellow cool dude!
Jay Beckerich The blackpoint tactical holster by Sig is awesome! The retention is great and there no printing whatsoever with the concealment claw. I know Harry's holster also make options for it now too.www.harrysholsters.com/collections www.sigsauer.com/store/sig-sauer-p365-appendix-carry-holster.html
I ordered a Vedder light tuck!
Jay Beckerich Gonna do a video on it?
In my opinion, you actually have quite a bit of barrel and slide wear already. I know you’ve put several hundred rounds through it but the wear seems a little excessive. Glad it was a good range day for you
yea there is some wear, especially on the left side.
Jay,
Don't worry about excessive wear- looks about right to me. Light grease on metal to metal, and oil on pivot points and springs, and you'll be GTG.
I’m an ICU nurse so this video wasn’t detailed enough for me. Haha jk thanks
Haha! You counting the number of nurses? Add another ... Trauma Bitch here
Go back to the 115 grain I don't think it was the ammo you was not holding the gun tight enough
+Carl Cardwell have shot 115 since with out issues.
Jay, remember to always have a high grip on the weapon, Bro!
i did 100 rounds with 115 and not a single issue. I was using freedoms munitions
Mike Cook www.ammospy.net will help you find the best deals on ammo out there... I was going to give Freedom Ammunitions a try until I read some bad reviews, and then I decided that I don't want to take a chance of one of my handguns blowing up on me, BECAUSE OF IMPROPERLY PRODUCED AMMUNITION!
If you DIDN'T adjust your grip, then you can bet your sweet ass that it wasn't the ammo; it had to do with how much energy was created. Smaller bullet + less gun powder*
Justin Todd I’ll check out that site. Thank you! As for freedom munitions i don’t but the reloads and been through couple thousand 9mm and 55grain 556 combined with no issue. But yea I did adjust my grip.. I am switching from the shield so it’s a little different.
Have you read the user's manual? I doubt it. That's not how they tell you to clean the gun in your user's manual. Why would you post a video that's different than what the engineers put in your user's manual?
Have you tried grease? I use a little bit of rigs grease and it works phenomenally! Here is the product if you are interested 😁www.midwayusa.com/product/1180385501/rig-universal-gun-grease
Also you live in Nebraska? I live in kansas. It be to to come shoot with you sometime! Let me know if you are interested. I'd drive up to shoot with a guy as passionate about guns as I am😁
Oh ya, and I got my p365 two days ago and am taking it out tomorrow 😉 Just a little fyi☺