Best Phone Mount for Your Jeep Wrangler or Jeep Gladiator
ฝัง
- เผยแพร่เมื่อ 5 พ.ย. 2022
- #dirtroadcred #jeepwrangler #jeepgladiator
Best Phone Mount for Your Jeep Wrangler or Jeep Gladiator
“If you buy through affiliate links, we may earn commissions, which help support our channel.”
Bulletpoint Phone Mounts (Use DRC10 at Checkout for 10% Off)
bit.ly/bulletpointmounts
Website: bit.ly/DirtRoadCredWebsite
Patreon: bit.ly/DRCPatreon
Instagram: @dirtroadcred
We believe Bulletpoint Mounting Solutions has the best phone mounts for your Jeep Wrangler & Jeep Gladiator. Today we install their RubiGrid on my 2022 Jeep Wrangler. Let us know what you think!
Check out our recent videos!
Jeep News November 2022 | SEMA, New Colors, 20th Anniversary Rubicon?
• Jeep News November 202...
Jeep Wrangler & Gladiator Install | Custom Grille Inserts from Under the Sun
• Jeep Wrangler & Gladia...
1st Place Jeep Wrangler JL | What's On Our Viewers Rig?
• 1st Place Jeep Wrangle... - ยานยนต์และพาหนะ
Thanks for watching!
What phone mount do you run?
I also run the Bulletpoint system in my 4xe
I run 67 designs. I looked at the Bulletpoint as well, but decided to go with 67 Designs. Very happy with it.
Thanks for video 😍😍
We would like a video showing the consumption rate of the Wrangler with 35 wheels and a 2-liter engine
I run 67 designs on my 2017 JK.
I’ve been enjoying my new Willys and have been trying to decide on a phone mount. Perfect timing! Thank you for the detailed install instructions.
You’re welcome!
This is the first thing that I ordered for my first Jeep after watching a previous video. Thank you
Awesome!
Thank you for this. I just installed mine in my 2023 Jeep Wrangler Unlimited Rubicon! Love it!!
Glad to hear, Heather!
That looks like a great mount. Thanks for continuing to show the choices available for the JL. 👍
No problem!
Cant lie, always enjoy getting to see your vidoes. great content. once i get my JL definitely going to get the base then run ram mount mounts only because i already have so many.
Thanks so much for the kind words!
love those mounts!!!
Me too!
Nice. Looks very clean, and it fits well. 👍👍👍 Great video. Another item I will be looking into when my Jeep comes in 👍
👍👍👍
I have their same mount for a year now. The tablet mount is trail tested rock solid. I also have their other grab bar mount. I love all their systems.
Great feedback!
I love Bullet point phone mounts! I had one in my gladiator, and I have one for my wrangler now. I ordered the one similar to the rubi grid for my wrangler. I still have a auxbeam switch board to install. Main reason why I got the grid system because of the versatility.
I love them too!
I've got the same setup in my 2020 JLU and 2022 Gladiator Mojave. One of the reasons I went with this setup in both vehicles is because I purchased a midland GMRS 15W radio and instead of buying two radios I just ordered a second radio mount from midland along with a second antenna and antenna mount. I mounted the extra radio mount to the bullet point bracket. The radio could either be hardwired or comes with 12V plug, so I use the 12V plug for power and easily move the radio between vehicles. I literally slide radio into bracket, screw on antenna cable and plug into 12V and I'm good. The bulletpoint system is awesome, holds my phone, GMRS radio and I also bought the mic holder attachement from Bullet point. I love it.
That’s awesome!
Matt, That's a nice set up. I use a CCM ball mount that replaces one of the screw on the grab handle. To that I use a RAM mount with a short bar. I find it's easy to access and does not reduce my field of vision. Just picked up my 2020 JLU Rubicon. (2.0L auto) I love the way it drives and rides..... Great video.... THANKS..
Thanks for watching!
Went with cpl diff mounts before the BMS. Love it. I use the magnetic but have both. Bought the grab bar mount from CMM & switch depending if someone in passenger seat
I love my set up!
Love mine. Had one on my 2016 and now my 2021 mojave. Solid mount
Glad to hear ! They are great!
I was actually just thinking earlier this week if you were going to do a video on Bulletpoint Mounts! I still need to get mine, with purple carbon fiber tubes, for my Reign JL when it gets here.
You will love them!
Love it!
👍👍👍
Nice phone mount-thanks guys
Thanks Dawn!
I didn't want to lose my dash tray, it's perfect for holding sunglasses. I went Carolina Metal Masters (CMM Offroad) A Pillar Mirror Mount with the Ball Mount. Not only do I have a factory looking solution to run mirrors when I have the doors off, but I have a 1mm ball for my RAM mounts so I can run any peripherals or GoPro's. I've been running that option on both of our JL's for a year now and could not be happier with their functionality and factory appearance.
Good call!
It is an awesome mounting system, have the same one on my Rubicon, just in black, and gonna order one for my wife’s Willys.
Awesome!
Can't wait to see the lift 🔧
Coming soon ray!
So if you actually read & pay attention to the comments you'll know I'm a fan of you guys and the channel ! That said it kills me that as big into Jeeps we all are it didn't occur to fold the windshield down !!! Lmao I know it ads a few steps but it be so much easier to install & hey you can clean it really well !!!! Gotta bust balls !!!!
So I just got my mount from bulletpoint, and I'm impressed. Initially, opening the packages I was not expecting it to all be machined metal. The phone clip, the ends of the carbon fiber arm, the arm ends, and even the balls all appear to me machined solid aluminum or steel. I was expecting at least some of it to be plastic. It's definitely going to last the test of time!
They are awesome!
YES they are awesome. Included a bullet bottle opener with mine and it’s mounted next to the phone holder 😁🇺🇸
Love to hear it!
Looks like a nice and sturdy mount 👍 As a fellow High Velocity Jeep owner, I felt that when you said the yellow doesn’t match. It’s hard to find accessories in that neon yellow!
It’s hard to match!
Love my bulletpoint mounts! You need a few more Matt lol.
All the mounts!
I did a lot of research on this mount and other competitors. The one I picked that work best for me was the ram mount. It was the a better solution for me. They have specific mount for the 2018 and up jl and jt. They a unlimited amount of mount available and when i added everything together it was cheaper than all ther mount for what felt also was better or same quality.
I love mine!
Use them too. Works great!
😎😎😎
It looks like they upgraded their RubiGrid. My wife and I both have them in our Jeeps, but they're one piece that just secures with the two screws. I like how you can take the top part off of yours to change accessories without having to unmount the base; it makes a lot more sense.
PS - Wives really like the grab bar mounting balls. With their tiny little girl arms, it's much easier for them to reach than those mounts way up on the dashboard. ;)
That’s awesome! Thanks for the comment!
Love my bullet point mounts, had it sitting here ready to fit while my Rubicon was still on order. Only disappointment was that they didn’t ship to Australia, had to order through Amazon. Don’t know if they have started sending international yet.
I got the left and right, dual ball mounts. Leaves me room in the middle for throwing sunglasses there when not being used, but still have 4 mount positions. Great set up.
Great setup!
I’m checking their site for jk set up. Nice mounts
Absolutely!
Also I’ve had one side mount for almost 2yrs w/o using 3M. No issues
Great feedback!
Hi Matt. Love your videos! What length support arm did you choose for your Rubicon? Picking mine up today!
Never mind. Just found that someone already asked this question. Standard length! Have a great day.
Yes standard length!
would love to see same install on Ryan's 24 as the mounting points are different starting in 24. thanks.
Already did it!
th-cam.com/video/tZHBPjKZ204/w-d-xo.html
One of the first things I ordered for my JL. Love my Bulletpoint mount!
Noticed yours was different than mine. I didn't have the two-piece design. Mine looks like the website, not like yours at all.
That’s interesting maybe this is a new style!
. Vector off road with 67 design on the 16, BulletPoint on the 2019 The version I have is slightly different, but as you vid says .. it is strudy.
Very sturdy!
I got a pair a few months ago on my Rubicon 4xe. You can just give a heads-up to your Canadian views they do not deliver in Canada. I had to get a US address shipper to ship it to Canada. It was worth it.
That’s interesting and good to know!
As soon as you said you were going to set those screws on the dash, I thought Nooooo! - Noob mistake, but now you know.
I use anvil overland phone mounts they hold your phone in a death grip and also the 69 mount both systems are nice and it’s also the last mounting solution I will ever buy
Nice!
You can fit up to 5 mounts on this system. It's perfect on my 2022 Gladiator
😎😎😎
I bit the bullet. Pun intended. Maybe now my phone won't land in my coffee cup, my iPad won't be laying in the floorboard and I can finally see where the heck the next trail turn off is! 🤦🏻♂👀
😂 enjoy it!
Off topic but any insight on the X-recon?
I’ve been hearing rumors of November 18th something special coming
Aloha Matt. This is a very cool 😎 and very useful product for the Jeep JT and Jeep Wrangler. Terrific video 📼 installation Matt.🤜🤛👐🙌😄🏡🤓💰😇🤠😎👍🔍🔅🌟🤲👀💪🎓📼🤙🐶🐕⛅
Thanks so much Ryan!
Found a nice double mount for my JK. Are we ordering straight from the website? Or do we order them through you.?
If you click on the link in the description it will take you to their site, it’s an affiliate link so it helps the channel!
Will have to see if they offer a charge system as well. Would prefer a wireless charging mount
Wireless charging is nice!
I’ve noticed nobody has mods specific to the 4xe and it’s differences from other JLUs
Good idea!
What length arms did you order? Those seem to be just right to not have the phone sticking too far out.
These are the standard length arms that come with it!
Is that screw forever in your vent, or will there be a video of "how to get a rogue screw out of your JL vents"?
might have to disassemble the entire Jeep to remove it haha
A little off topic but I am interested in picking your brain on things to do to start a channel would love to get some pointers to get started
The best way for an in-depth convo is through the patreon !
@@DIRTROADCRED what is patreon link?
I need a way to mount a GoPro to the exterior of my Jeep so that the video doesn't show any of the Jeep, only the landscape in front of me.
Do you have PPF on your Jeep and what’s are you thought about it ?
I don’t but I have debated it!
I just dropped the windshield to do all my dash work so I didn't have to bend like a prezil
Good call!
It's like 30 minutes tops to drop the windshield and less to put it back up so that way ppl aren't struggling to see stuff in the tight small dash that's the new jeeps have
Are those arms a short version or regular length?
Regular length!
I enjoy their products, but really wish they were made in the USA. I'd pay more for that.
Not much is anymore, I am very happy that they design and assemble them here.
Who owns a jeep that doesn't have tools
Tools are the next biggest expenditure after you buy the jeep.
Some don’t! I think it’s a nice feature it includes another!
These are nice but they need a wireless charging option. I would be all over it if that were the case.
Wireless charging would be nice!
67Designs is pretty much identical to this. Not sure on the price difference.
Not sure!
@@DIRTROADCRED Actually, AS YOU KNOW, this is a made in China copy of the Made in the U.S.A. 67 Designs cellphone mounts. 🇺🇸
I love their phone mount, but the tablet mount is really not that great. Cheap plastic, rattle when empty. And for the life of me was not able to make it stable. It was rotating even tighten to the point of breaking. I had to change and buy an aluminum tablet holder for tripod with a ball and new arm from tackform and it was way sturdier.
Interesting!
Rip that screw
🙏🏻
Way to much work for a very average phone mount
It’s not too mad!
These mounts suck, first off it's nothing new it's the same one all the same TH-camrs show, but who wants to mount their phone that high up? You want everyone to see your phone or just you. It needs to be much lower, that mount is ridiculous
I’m a fan of them and have been for a while, I have worked with them to make this install happen and they have been great to me and the community
Not being negative just my opinion 100 plus for no wireless charging? Way to much.
Definitely hard to get that all for under 100