Wolverine Inferno Install in G&G Body (including gun disassembly and reassembly)
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Ever wanted to get an HPA system but you weren't sure how to put it all together? We've got you covered! Wes is in the studio to give a step by step demonstration of how to install your very own HPA system.
Skip ahead to @10:43 if you just want to see the gearbox installation.
Check out and follow our other accounts for even more!
www.ampedairsoft.com
Facebook: Amped Airsoft
Instagram: @AmpedAirsoftOfficial
Snapchat: amped_airsoft
Huge help!! Have been into airsoft for 10 years now and have only ever bought guns. Today was my first day purchasing parts to build my own hpa gun. Got an hpa g&g when I was younger and the technology has changed so much that I'm upgrading the internals to one of these. This makes my adventure way less nerve-wracking.
This seemed terrifying to me before watching this. You make it so simple, cheers man
Just boosted my DIY confidence THANK YOU!!!
Awesome! Glad we could help! Best of luck on your build!
I literally did this install on my own G&G, with the Wolverine Inferno just hours before you posted this video! Unfortunately no video of my install, but I do see that I can improve my installment quite abit with your tips and tricks. Thanks alot guys! Cheers! *now where did I leave my trigger screw... ô.0*
Brawler Baos check in your shoes
@@speedsquadracing6090 My guy! Found the trigger. It was hid in my shoes ;)
Brawler Baos naw bet
so just got a inferno gen 2 out of the box. One of the battery connection wires just broke off! I think they need to quality control these better
So the battery compartment is in the grip? Kinda tight
Yeah that can be risky
Can you run the battery through the buffertube?
Where would you run the battery connection wire if you opt for the in grip regulator on Wolverines website?
Great Video!
I'm installing my new reaper in my mtw will my inferno i take out fit in the combat machine?
Does ur engine come loose after few games?
What if your grip line can't fit through the hole in your motor plate? It's alright not having it on but then your battery would you just fall out? Can you reroute the battery to fit inside the stock?
You could I had this issue too but I ended up just drilling a bigger hole through the plate to fit my line through. Kind of a pain unless you have a drill press!
What if you install it and it doesn't want to shoot like it doesn't click
I did my install, however with the Max ME Sport the BBs aren't feeding. I have purchased a Max Pro M4A as per what a few people who are HPA'ed have said to use but can you give any idea what else could be causing the issue. When i push the mag forward it feeds, when i release the pressure it stops feeding.
Have you managed to put an hpa engine into a kwa qrf mod 2?
Is the data cable not long enough to put in the buffer tube with the battery and FCU.
U may need extension cabel
Cable
Awesome video bud, I’ll sub’ for that. Many thanks.
Do you think my airsoft store/field will install for me?
Not sure? This is a question that you will need to ask your store/field. ;) If you need help with finding someone to install a system, we offer install services as well. Please hit us up at sales@ampedairsoft.com if you decide you need help doing so and we will gladly install it for you.
Thanks!
Can you guys do an install on the g36
Awesome, thanks a bunch
ahhh yes, wes the chad
What is the screw on top of inferno for?
Why was your gear boc so damn clean mine was dirty af
This was installed for a customer on a brand new gun. I would assume it was pretty clean because it wasn't run yet. ;)
Will a polarstar fusion engine be a straight drop in?
Thanks for your question! All HPA units may require some alignment. There really isn't per say a straight drop in. The closest would be a VFC rifle, however, even they sometimes require alignment. Hope this helps!
Will this fit inside a krytac lvoa gearbox without modding
Does it?
I’m looking for an hpa engine for gg arp9 could you put me in the right direction or do a video on it please it help lots
Polar star jack
I'm planning to do the same, what did you buy?
I installed the inferno premium edition in a krytac pwd mkII and it turns out that when I shoot the bbs they do not come out straight they come out super curved and to make them come out straight I have to turn the replica about 20 degrees, do you know what I can do to solve the problem?
Did you ever figure it out. Sounds to me allinment is a tad off and or the nozzle is seating the bbs really close to the mound of the bucking resulting in inconsistent hop on the bbs.. I could be wrong but that's what comes to mind when I think of it lol
Gotta love wolverine
what’s the difference can I use a non slp tank and slp line and reg or what @Amped Airsoft
SDR_Dom your comparing a hpa system and stock aeg....
Nvm ab that but could I use a non SLP tank with every thing else Slp
OP Airsoft ^
@@viperdom7840 Negative. If you are running an SLP Regulator you have to run an SLP Tank. However, if you are running a non-slp reg such as an SFR, MRS, Storm, etc, then you can use either an SLP tank or a standard tank.
Essentially an SLP Tank can be used on any reg within our market. An SLP Reg however, can only use SLP Tanks.
Hope this helps!
@@viperdom7840 no, you can only use a SLP tank with none SLP regs. With a SLP reg you have to use SLP tanks
I’m having full auto issues i cant seem to get it to shoot full auto any ideas?
your selector plate
is this the inferno spartan edition? and can it be programmed?
This specific one is the Wolverine Inferno Spartan Edition. It has limited programming vs the standard FCU. The Spartan Edition is programmed by trigger pulls.
@@AmpedAirsoft ok thank you im just starting to get into hpa so ill probably get this one it seem simple enough and does this kit come with the air line connector thing at the bottom of the line on evike it had a picture but i never see it in any reviews only the buffer tube screw attachment
@@benm1960 If you purchase a player kit through us, it will come with the HPA unit, Air Rig, Tank, and everything you need to hook it up to the tank. You can see our kits here:
ampedairsoft.com/amped-airsoft-wolverine-inferno-gen-2-v2-spartan-edition-player-kit/
We will be receiving our wolverine restock here shortly.
Thanks!
@@AmpedAirsoft thanks guys
@@benm1960 No problemo!
Should’ve sanded my selector plate... lol $20 plus shipping on a new trigger board now 🤦🏻♂️
What G&G is that?
This is the following G&G:
ampedairsoft.com/g-g-combat-machine-cm16-sr-s/
FIRMLY GRASP IT
Your video is upside down, holy shit
spoiler for everyone, it will shoot not good, and the battery should be placed in the stock
Not gonna lie I just wanna see how many likes this comment and video gets... Dont dislike it.