I CAN NOT tell you how helpful this was! I’ve been selling die cut stickers but have been wanting to make sticker sheets. EVERY. VIDEO. Completely skips over the sticker sheet template part. Thanks a million!
8:20 The washi tape cut will do a "kiss cut" so to ensure that your background is fully cut out of the sticker paper then you will have to duplicate the background 3x (going from what Fructus did). This will have the cricut machine cut multiple times around the boarder to ensure it is fully cut. Edit: Seeing how you did the outline on each sticker was so helpful!
Thankyou for this! I was just about to come In the comments and ask if anyone knew the best way to kiss cut the stickers and cut the whole sticker sheet out at the same time ❤
I’m adding my biggest thanks to your comments section. I have completely failed at this every other time I’ve done this. Your tutorial was so INCREDIBLY helpful, after spending hours of trying and not getting things to turn out quite right. Thank you so much for taking the time to go over every step 🥺
12:30 hey, Jen, great video! Just a quick tip that I discovered: you can actually wash the Cricut mats in soap and water to remove residue, which will greatly improve the stickiness.
Heya, I just wanted to pop by and say thank you so much! I've been struggling to make stickers with a sticker sheet and your video was the clearest and most concise video I've watched so far.
Wonderful tutorial! It did take me 3 passes with the Cricut Maker using Zicoto Vinyl Glossy Sticker Paper using Washi setting and a fairly new blade. But the results are wonderful!
Thank you for this awesome video and for your time in making it! Thank you for telling us the Procreate canvas size for the sticker sheet. What canvas size do you use for your sticker?
Thank you so much for this tutorial. It is concise, yet you covered the topic completely. I have watched this video twice already and will refer back to it as I print out my stickers. Thank you!
This is a really great “How to,” vid. It covers everything I wanted to know whilst being clear and concise so I understood without losing interest. Thanx, I really appreciate this upload 😍
Watched this tutorial so much to help start my own sticker business. Little too for the cricut make sure you wash your mats with water and soap and let air dry frequently. Help preserve the sticky
This is the best tutorial I ever found! Thank you for making it so clear and easy to understand❤❤ (Also I looooove your sticker designs. They're so cute!)
Thank you for your video!! Definitely the easiest video I’ve seen to follow. I do have a question though - I did all the same steps but for some reason my circuit is only cutting the background edges and not the sticker…would you have a troubleshoot for this?
Figured I'd mention for anyone else reading; the printer is not printing in RGB, it is still printing in CMYK. It has just converted to CMYK and then uses the additional settings to adjust the colours further to the user's preference. Not all colours that can be displayed by a computer monitor can be printed, hence why it is often better to work in CMYK in the first place! Things may still need adjusting for print, but at least you won't inadvertently end up using an out of gamut colour that can't be matched by the printer! I'm sure personal preference also comes into play. It's really interesting seeing all the Cricut related things in this video! I have a Silhouette (and this is what I would recommend to people as it's a lot more flexible and offers more control, especially with the software) but still like watching sticker videos of people using different hardware to me to see what tips I can pick up! Thank you for this video! I really love how these sheets turned out, and the designs are adorable
Happy to hear that! 🥰 I don't have a video or tutorial on the header right now. I just drew it in by hand but you can use Canva probably and use the shapes they have to create something similar :)
This is amazing work if I only knew how to to use procreate. I’ve been watching countless videos on how to make stickers it’s gets so overwhelming when you are a newbie but so far you tutorial is pretty straight forward other then not know how to use procreate . Do you have a tutorial on procreate?❤
Hi Jen! I was wondering if you have tried to create a sticker sheet with a laminate on top of it? I've been trying to figure it out for a while now and figured I'd reach out! Thanks for this video, it helped a ton in making regular sticker sheets. Love your content ♡
Hey! I run a sticker shop, and all the stickers I create are topped with self-adhesive laminate. Lamination not only prevents scratching and enhances waterproofing but also improves overall durability. Right now, I’m using Cricut-brand laminate, which I’ve found to be the most effective. The other laminates I tried cause dozens of air bubbleswhen applying, which are a pain to get rid of. After printing the stickers, stick the sheet onto the Cricut mat and then apply the self-adhesive laminate over the stickers using a squeegee. The Cricut machine cannot detect the black sensor marks on glossy or laminated paper, so place matte tape over the black sensor lines (after laminating) to ensure that the Cricut reads the marks correctly. Hope this helps answer any questions you had! 🙌
Always so interesting to watch your videos! I'm currently planning on make some stickers for my shop for the first time so this video is very handy to have around, specially for the printing settings since I also have an epson thanks for sharing!
With the same cutting settings work if you using laminate, I want to create laminated holographic sticker sheets, and I’m a little bit worried that the regular settings for creating sticker sheets won’t work for laminated stickers because I have created laminated holographic stickers and kiss cut but not sticker sheets and I don’t want to cut too deep an the sticker comes off. This has been a headache.
This is so helpful, but I see you work in lettering paper size, I need a4 dimensions, also the pixel dimensions for your individual pictures sun/moon would be helpful, are you using the same as your sticker sheet?
Thank you! I'm always looking for ways to make things simpler and easier to do and understand so I'm very glad to hear that you think this video/process does that! 😊♥
3:11 when i rotate or make my my stickers smaller, they get al pixeled and with worse quality, do u know how to fix that? :(. Cause it would make sence if i was making them bigger, but i’m not
Excellent video which I followed today but I am not having the options to do the colour profiles where you do the +10 to the colours and choose 'vivid'? I am using a MacBook.
I know you made this video 1 year ago but I have a quick question I don’t really know if your able to make sticker sheets on a cricut joy xtra and I wanted to ask if you know if you can
Very helpful in depth video! Thanks for sharing ❤ I’m curious to know much each material cost when you created the sticker sheet? From the printer, to paper, the cricut and any other materials you need. I’ve been sending my designs to a company for them to make my stickers, but I’m leaning towards making my own stickers 😊
This video is so helpful!! I’m doing exactly what you have done but my cricut is still only cutting out the background square and not the individual stickers, any tips?!
Are you uploading the stickers and the background separately? If so, make sure that they are both set to print and cut. And don't merge the layers in the Cricut Design Space. You want to only group or attach them.
Hi Jen, I have a question about making sticker sheets. When I upload each separate layer, (background and sticker designs) it only cuts out the outline of both sticker sheets, and ignores the designs! Is this a problem that other people have? Or am I doing it wrong? Pls help! Thanks!
Typically yes that is the rule for printing. However, my printer can handle RGB and I prefer the colors with this color profile so that's why I use it. 😊
This is not working for me. Every single time I try to do sticker sheets like this, my cricut only cuts the outline of the sticker sheet, but NEVER cuts the stickers themselves. It's extremely frustrating.
I just got my cricut a few days ago, so this video really helped me understanding Cricut Design Space a bit better. However, I cannot cut the outline of the sticker. I followed exactly as you did, and only the outside of the sticker sheet gets printed, but not the actual sticker borders. The only difference is that I only use my iPad, both to draw and to run Cricut Design Space. Could it be the reason ? It looks so easy for everyone and i really don’t get why it doesn’t work for me :(( Does anyone else has/had the same problem ?
Yes! I also have Cricut design space on my iPad, and it’s only cuts the outline of the sticker sheets rectangles! I followed the video but for some reason it didn’t work
May i ask what sticker paper you use for this? Ive been using a glossy + laminate style for my decals but would be curious to know what your preferences are for sticker sheet specific!
I dont have an option to do clipping mask when i make a copy of background layer and move above outline layer. I had 2 layers there in the background so i also triwd merging them to see if that helped but it didn't. Im stuck. Can anyone plz help?
I love the tutorial, very easy to understand!! Im having a problem, tho 😭 I follow the cutting process exactly how you did, but my machine only keeps cutting the background and doesn't cut the stickers inside. I try different techniques, but it keeps doing it wrong
Hmm maybe try uploading the files again and double check that you are doing "print then cut" on both the stickers and the background when you upload the files separately 😊 And make sure you only group or attach your layers. Do not flatten! Hope this helps!
Yes, I was doing it like that. I think it is really weird that it is not working. I tried another method after, and it kinda work but the cut wasn't perfect 😅 Anyways, thank you for replying. I recently found your channel, and I love your content relaxing and inspiring ✨️💜
I have followed your video step by step and for some reason my cricut isn’t cutting the individual stickers, it’s only cutting round the edges? Do you know why this is?
Hi Fructus, I've been trying to print stickers for fun but I keep running into the problem of my sticker paper jamming a lot - is it because of my sticker paper because it's new? I've made sure to try and feed my sticker paper 1 by 1 as well as fanning them, but it will still randomly jam, it makes making stickers not as fun because I feel like it's 70% troubleshooting and 30% having the stickers come out right :(
hii, great video! but whenever I try to do this it only cuts the outline of my sheet( I’ve been trying it for years now). does someone have any idea what I’m doing wrong
I have a question I printing with ink and I saw some "bad" lines I little bit scared to fix or do semthing could you say is it really bad, I printed about 10papers colored .
This is the best tutorial I've watched also I have epson 2800 so I am so confused on what kind of paper sticker I can use? Also what sticker paper i can use if the ink is sublimation? 🫠
I really enjoyed watching this video! Thank you very much for the tutorial. 💕 I just bought myself an epson printer some time ago and actually have one specific problem when printing; it leaves pizza wheel marks (little dotted lines all over the paper). Could you please make a video about your printer and settings, depending on which kind of paper you use? That would be amazing! Looking forward seing more videos from you!
Another other drawing or graphic design tool should work too. Something like Canva or photoshop. I've just used Procreate but I'm sure there are plenty of other ways to do the same thing :)
Hi Jen, for the part where you show the sticker design, whats the canvas size? I noticed that it didnt pixelate when you transfer them to the sheet and adjust them. Thanks! 😊 hope you can read my comment. Love the video. Been looking for a tutorial like this. Next is for the border layout you made. I will find tutorials on how to do that. 😂
On procreate, the canvas size is 4.5 x 6 inches or 1350 x 1800 pixels at 300 DPI. In the Cricut design space, I then just size it back to 4.5 x 6 inches because it gets really big when you import it 😊
Great tutorial. I have had my Cricut Maker machine for 3 years and never dared to make some stickers. I understand everything except for one thing. When I am in Procreat and going around my stickers with white and using the script brush with the stabilization settings of Max and Stabalization to Max . I then go around my sticker and my line does not come out even around my sticker. I know I must be doing something wrong but can't figure it out.
My suggestion would be to go slowly. Sometimes going slow is helpful to get a consistent outline.You could also turn on the brush cursor to see how big the brush is and maybe that could help with outlines. To turn it on go to Actions > Prefs > Brush cursor
I only laminate my individual stickers because I expect those to be used on various surfaces that are subject to more wear. So I laminate them to be more protected. I don't laminate sticker sheets because I expect those to be used in notebooks and journals. Deciding when you want to laminate is entirely up to you though! 🐻♥
I CAN NOT tell you how helpful this was! I’ve been selling die cut stickers but have been wanting to make sticker sheets. EVERY. VIDEO. Completely skips over the sticker sheet template part. Thanks a million!
8:20 The washi tape cut will do a "kiss cut" so to ensure that your background is fully cut out of the sticker paper then you will have to duplicate the background 3x (going from what Fructus did). This will have the cricut machine cut multiple times around the boarder to ensure it is fully cut.
Edit: Seeing how you did the outline on each sticker was so helpful!
Thankyou for this! I was just about to come In the comments and ask if anyone knew the best way to kiss cut the stickers and cut the whole sticker sheet out at the same time ❤
@tamzenhunter1681 I hope it made sense 😅 you may have to duplicate the background 4-5x.
@@PegzieBean it did! Thankyou!
I don’t understand this 😭
I’m adding my biggest thanks to your comments section.
I have completely failed at this every other time I’ve done this.
Your tutorial was so INCREDIBLY helpful, after spending hours of trying and not getting things to turn out quite right.
Thank you so much for taking the time to go over every step 🥺
👏 woo! I love this. No gatekeeping. Very comprehensive. Thank you so much for sharing this.
This is absolutely the most complete and easy to follow video I’ve ever watched on sticker sheets. You are the hero we all needed. Thank you!
Wow, thank you! Glad it was so helpful!🐻♥
Sticker sheets have always terrified me, you've explained this in such a simple way, great tutorial ❤
Yeah I used to avoid them because it seemed to scary and complicated haha but I hope this helps! 😊♥
Thank you so much for showing the COMPLETE process including the print settings. That really helped me alot!
This was so helpful! I’m making some gothic valentines sticker sheets and this answered all my questions
This is SO helpful. I love that you include designing a sticker sheet along with the printing and cutting.
12:30 hey, Jen, great video! Just a quick tip that I discovered: you can actually wash the Cricut mats in soap and water to remove residue, which will greatly improve the stickiness.
Great tip! Thanks! I will try that out because I really don't like using all that tape!
The best complete tutorial I have seen - so helpful thank you 🎉
This is like the best tutorial for making and cutting stickers. Thanks.
Thanks for walking us through this!
All of this is so helpful :D
I myself want to build a sticker business and no other tutorial was this helpful ^^
Heya, I just wanted to pop by and say thank you so much! I've been struggling to make stickers with a sticker sheet and your video was the clearest and most concise video I've watched so far.
Glad I could help!☺❤
My jaw is on the floor watching you copy mulitple layers from one canvas to another, WE CAN DO THAT??? WHAT??!!
Been using procreate for two years, I never knew that was thing 😂 So glad to see it!
SAAAAAAMMMME!!!!😂
Sameeeee ☠️
You’re a saint for this. 🖤 best tutorial for this. Thank you!!
Wow, thank you!
I was today years old learning about how to copy layers to different canvases!!!!! I’m so excited to try this!!!
Same!!! Also different pages in a single canvas lol
Yayy! I'm glad you learned a couple of new tricks! ♥😊
Wonderful tutorial! It did take me 3 passes with the Cricut Maker using Zicoto Vinyl Glossy Sticker Paper using Washi setting and a fairly new blade. But the results are wonderful!
Thank you for this awesome video and for your time in making it! Thank you for telling us the Procreate canvas size for the sticker sheet. What canvas size do you use for your sticker?
Thank you for this complete tutorial and for doing it with a dignity and professionalism, for not making “entertaining “🙌🏻
You are so welcome!
Thank you so much for this tutorial. It is concise, yet you covered the topic completely. I have watched this video twice already and will refer back to it as I print out my stickers. Thank you!
Glad it was helpful!🐻♥
This is a really great “How to,” vid. It covers everything I wanted to know whilst being clear and concise so I understood without losing interest. Thanx, I really appreciate this upload 😍
This tutorial is such a gift!! Your explanations are so clear and thorough! 😊❤
Glad you think so! 🐻♥
Watched this tutorial so much to help start my own sticker business. Little too for the cricut make sure you wash your mats with water and soap and let air dry frequently. Help preserve the sticky
That's a great idea! Will have to try that out soon!
Thank you so much for this. I have had my Cricut for a month and this video really helped me! Great tutorial!
This is the best tutorial I ever found! Thank you for making it so clear and easy to understand❤❤ (Also I looooove your sticker designs. They're so cute!)
Thank you for your video!! Definitely the easiest video I’ve seen to follow. I do have a question though - I did all the same steps but for some reason my circuit is only cutting the background edges and not the sticker…would you have a troubleshoot for this?
This was such a great tutorial! Thank you so much for taking the time to share your process!
This is hands down the best how-to video I have ever seen! Thank you so much!
Wow, thanks!😊♥
This is sooooo incredibly helpful!
Thank you for much for making this video! Every single step is clear and well explained :)
Best video I have ever seen here ❤️❤️❤️❤️❤️❤️
Thank you so much.
Figured I'd mention for anyone else reading; the printer is not printing in RGB, it is still printing in CMYK. It has just converted to CMYK and then uses the additional settings to adjust the colours further to the user's preference. Not all colours that can be displayed by a computer monitor can be printed, hence why it is often better to work in CMYK in the first place! Things may still need adjusting for print, but at least you won't inadvertently end up using an out of gamut colour that can't be matched by the printer! I'm sure personal preference also comes into play.
It's really interesting seeing all the Cricut related things in this video! I have a Silhouette (and this is what I would recommend to people as it's a lot more flexible and offers more control, especially with the software) but still like watching sticker videos of people using different hardware to me to see what tips I can pick up! Thank you for this video! I really love how these sheets turned out, and the designs are adorable
Hi can you tell me how you made the backing sheet?
Thanks for sharing your process ❤ xxx
I’ve had procreate for a while and I learned a lot from this video and will be coming back to it for sticker sheet making. Thank you 2:34
This is definitely one of the best videos I’ve watched ! I love it 🎉❤
Wow, thank you! 🐻♥
Hands down the best video I've watched about sticker sheets! Do you have a video on how you created your header for your sticker sheets?
Happy to hear that! 🥰 I don't have a video or tutorial on the header right now. I just drew it in by hand but you can use Canva probably and use the shapes they have to create something similar :)
This is so helpful!!! I love it!! Thank you!!!
🐻🧡❤️😍✨✨✨ Yayyy so glad to cozy up to another informative kawaii video, hope you have an awesome weekend Jen😍✨✨🧡❤️🐻
Yayy! thanks for being here and I hope you too have an awesome weekend! 🐻♥
@@fructusillustrations 🐻🧡❤️✨
Thank you for this super useful tutorial Jen!! You are the best! May I ask what paper you use for the sheets? Thank you !! 🥰🥰
I used HTV Ront matte printable vinyl for these sticker sheets!
This is amazing work if I only knew how to to use procreate. I’ve been watching countless videos on how to make stickers it’s gets so overwhelming when you are a newbie but so far you tutorial is pretty straight forward other then not know how to use procreate . Do you have a tutorial on procreate?❤
Great tutorial! Thanks so much for sharing. I'm still learning Procreate, this will be something fun to work towards.
Best tutorial ever
What a fantastic video, best I've seen so far, so clear and informative thanks.
Wow, thanks!🐻♥
This was exactly what I needed. Thank you so much!
Glad it was helpful!♥♥♥
Hi Jen! I was wondering if you have tried to create a sticker sheet with a laminate on top of it? I've been trying to figure it out for a while now and figured I'd reach out!
Thanks for this video, it helped a ton in making regular sticker sheets. Love your content ♡
Hey! I run a sticker shop, and all the stickers I create are topped with self-adhesive laminate. Lamination not only prevents scratching and enhances waterproofing but also improves overall durability. Right now, I’m using Cricut-brand laminate, which I’ve found to be the most effective. The other laminates I tried cause dozens of air bubbleswhen applying, which are a pain to get rid of. After printing the stickers, stick the sheet onto the Cricut mat and then apply the self-adhesive laminate over the stickers using a squeegee. The Cricut machine cannot detect the black sensor marks on glossy or laminated paper, so place matte tape over the black sensor lines (after laminating) to ensure that the Cricut reads the marks correctly. Hope this helps answer any questions you had! 🙌
Always so interesting to watch your videos! I'm currently planning on make some stickers for my shop for the first time so this video is very handy to have around, specially for the printing settings since I also have an epson thanks for sharing!
Good luck!!♥♥♥
With the same cutting settings work if you using laminate, I want to create laminated holographic sticker sheets, and I’m a little bit worried that the regular settings for creating sticker sheets won’t work for laminated stickers because I have created laminated holographic stickers and kiss cut but not sticker sheets and I don’t want to cut too deep an the sticker comes off. This has been a headache.
This is so helpful, but I see you work in lettering paper size, I need a4 dimensions, also the pixel dimensions for your individual pictures sun/moon would be helpful, are you using the same as your sticker sheet?
Hey did you attach the image with the background before you duplicated it and attached it? 🥰
Thanks for the video! I really like your videos. I’ve seen people use the Cricut to cut out the sticker sheet but your way seems a lot easier.
Thank you! I'm always looking for ways to make things simpler and easier to do and understand so I'm very glad to hear that you think this video/process does that! 😊♥
easy to follow looking to try myself thanks and great video!
3:11 when i rotate or make my my stickers smaller, they get al pixeled and with worse quality, do u know how to fix that? :(. Cause it would make sence if i was making them bigger, but i’m not
Excellent video which I followed today but I am not having the options to do the colour profiles where you do the +10 to the colours and choose 'vivid'? I am using a MacBook.
I have an epson printer so I'm not sure if you're using something different but you can try deleting your printer and re-adding it
this was soooo helpful thank you SO much ✨✨
Hmm, cricut didn’t cut my stickers just the outline of the background. Not sure what I did wrong.
I had the exact same problem 🙃 not sure how to troubleshoot that at all as I followed all the steps🤷🏻♀️
Excellent and clear video. Thank you. 😊
Glad you enjoyed it!😊😊😊
I know you made this video 1 year ago but I have a quick question I don’t really know if your able to make sticker sheets on a cricut joy xtra and I wanted to ask if you know if you can
I don’t see why you wouldn’t be able to! Just watch your sizing. I also have one and I’m going to give it a go 😅
you explained everything so great, thank you ❤
Excellent video!!!! Thank you!!!!
Wow you didn’t have to fill in the outlines once you turned off the sticker layer?
Very helpful in depth video! Thanks for sharing ❤ I’m curious to know much each material cost when you created the sticker sheet? From the printer, to paper, the cricut and any other materials you need. I’ve been sending my designs to a company for them to make my stickers, but I’m leaning towards making my own stickers 😊
great video, very well presented, thank you for sharing your process ☺
Glad it was helpful! ♥🐻
This video is so helpful!! I’m doing exactly what you have done but my cricut is still only cutting out the background square and not the individual stickers, any tips?!
Are you uploading the stickers and the background separately? If so, make sure that they are both set to print and cut. And don't merge the layers in the Cricut Design Space. You want to only group or attach them.
Thank you for this video, you made it easy to understand. 🙏👏🏽
Yayy! I'm so happy to hear that! ♥♥♥
thank you for sharing😊
Hi Jen, I have a question about making sticker sheets. When I upload each separate layer, (background and sticker designs) it only cuts out the outline of both sticker sheets, and ignores the designs! Is this a problem that other people have? Or am I doing it wrong? Pls help! Thanks!
Thank you. This was very informative
So glad!
Thank you! This is very informative. But I noticed you created in Procreate using RGB. I always thought we had to use CMYK if we are going to print.
Typically yes that is the rule for printing. However, my printer can handle RGB and I prefer the colors with this color profile so that's why I use it. 😊
This is awesome ! thanks so mch !! what kind of sticker sheets are you using ?
This is not working for me. Every single time I try to do sticker sheets like this, my cricut only cuts the outline of the sticker sheet, but NEVER cuts the stickers themselves. It's extremely frustrating.
I just got my cricut a few days ago, so this video really helped me understanding Cricut Design Space a bit better. However, I cannot cut the outline of the sticker. I followed exactly as you did, and only the outside of the sticker sheet gets printed, but not the actual sticker borders. The only difference is that I only use my iPad, both to draw and to run Cricut Design Space. Could it be the reason ? It looks so easy for everyone and i really don’t get why it doesn’t work for me :(( Does anyone else has/had the same problem ?
literally having the same issue and also using an ipad for both cricut and and procreate
@@blessedpudding3147 Yess! Me too! I have no idea why it just cute out the sticker sheets rectangle!
Yes! I also have Cricut design space on my iPad, and it’s only cuts the outline of the sticker sheets rectangles! I followed the video but for some reason it didn’t work
I absolutely love your videos! You've helped e so much in starting my own sticker business :)
Awesome! Thank you and I wish you the best on your business! 🐻♥
U R VERY GIFTED.
May i ask what sticker paper you use for this? Ive been using a glossy + laminate style for my decals but would be curious to know what your preferences are for sticker sheet specific!
can't you select and expand to create the borders?
This video has been immensly helpful, thank you! i was just wondering what size canvas you design the stickers themselves on?
For stickers sheets, I use a 4.5 x 6 inch canvas :)
I dont have an option to do clipping mask when i make a copy of background layer and move above outline layer. I had 2 layers there in the background so i also triwd merging them to see if that helped but it didn't. Im stuck. Can anyone plz help?
When I follow your steps my cricut only cuts the background but not the stickers? What should I do?
I love the tutorial, very easy to understand!! Im having a problem, tho 😭 I follow the cutting process exactly how you did, but my machine only keeps cutting the background and doesn't cut the stickers inside. I try different techniques, but it keeps doing it wrong
Hmm maybe try uploading the files again and double check that you are doing "print then cut" on both the stickers and the background when you upload the files separately 😊 And make sure you only group or attach your layers. Do not flatten! Hope this helps!
Yes, I was doing it like that. I think it is really weird that it is not working. I tried another method after, and it kinda work but the cut wasn't perfect 😅
Anyways, thank you for replying. I recently found your channel, and I love your content relaxing and inspiring ✨️💜
Great tutorial! But what is the canvas size for your design sticker (at 2:16)?
I use a square canvas that's 3080 px by 3080 px 😊
I would like to start with sticker
Could you help me for the starter equipment what I need ?
Mine didn’t cut out the stickers individually just the whole square sheet idk what I did wrong? 😢
I have followed your video step by step and for some reason my cricut isn’t cutting the individual stickers, it’s only cutting round the edges? Do you know why this is?
Hi Fructus, I've been trying to print stickers for fun but I keep running into the problem of my sticker paper jamming a lot - is it because of my sticker paper because it's new?
I've made sure to try and feed my sticker paper 1 by 1 as well as fanning them, but it will still randomly jam, it makes making stickers not as fun because I feel like it's 70% troubleshooting and 30% having the stickers come out right :(
hii, great video!
but whenever I try to do this it only cuts the outline of my sheet( I’ve been trying it for years now).
does someone have any idea what I’m doing wrong
I have a question I printing with ink and I saw some "bad" lines I little bit scared to fix or do semthing could you say is it really bad, I printed about 10papers colored .
This is the best tutorial I've watched also I have epson 2800 so I am so confused on what kind of paper sticker I can use? Also what sticker paper i can use if the ink is sublimation? 🫠
Hey jen loved the video and how you explained. May i know what is the size of sheet on which you made separate stickers?
The sticker paper is letter sized or 8.5 inches x 11 inches. I can fit 2 sticker sheets per page 😊
Mine only cuts the man outline so it doesn’t cut the actual stickers do you know how to fix that ( I am using cricut maker )
Thank you so much
it was really helpful, but i have question, if i used cricut to create the sheets do i must have the cricut machine ?
Yep! ❤
I really enjoyed watching this video! Thank you very much for the tutorial. 💕 I just bought myself an epson printer some time ago and actually have one specific problem when printing; it leaves pizza wheel marks (little dotted lines all over the paper). Could you please make a video about your printer and settings, depending on which kind of paper you use? That would be amazing! Looking forward seing more videos from you!
I have this issue too on my Epson printer, I haven't yet found a way to combat it and I've been trying for 11 months 😭
Hi!!
I don't have pro create. How do I make the backing without this? 😊
Another other drawing or graphic design tool should work too. Something like Canva or photoshop. I've just used Procreate but I'm sure there are plenty of other ways to do the same thing :)
Thank you
What material should I set for my cutting settings if I can't select washi tape - 0.06mm, because it says that this material is incompatible? 😅
You can also try using the sticky note setting! ♥
Hi Jen, for the part where you show the sticker design, whats the canvas size? I noticed that it didnt pixelate when you transfer them to the sheet and adjust them. Thanks! 😊 hope you can read my comment.
Love the video. Been looking for a tutorial like this.
Next is for the border layout you made. I will find tutorials on how to do that. 😂
On procreate, the canvas size is 4.5 x 6 inches or 1350 x 1800 pixels at 300 DPI. In the Cricut design space, I then just size it back to 4.5 x 6 inches because it gets really big when you import it 😊
Great tutorial. I have had my Cricut Maker machine for 3 years and never dared to make some stickers. I understand everything except for one thing. When I am in Procreat and going around my stickers with white and using the script brush with the stabilization settings of Max and Stabalization to Max . I then go around my sticker and my line does not come out even around my sticker. I know I must be doing something wrong but can't figure it out.
My suggestion would be to go slowly. Sometimes going slow is helpful to get a consistent outline.You could also turn on the brush cursor to see how big the brush is and maybe that could help with outlines. To turn it on go to Actions > Prefs > Brush cursor
Thank you :)
@@fructusillustrations
Thank you so much for the tutorial! I’d like to ask when do you think it’s necessary to laminate the stickers after printing? Thanks again.
I only laminate my individual stickers because I expect those to be used on various surfaces that are subject to more wear. So I laminate them to be more protected. I don't laminate sticker sheets because I expect those to be used in notebooks and journals. Deciding when you want to laminate is entirely up to you though! 🐻♥
Thank you ❤❤
Great video!