ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Oil Leak on Lawn Mower Repair (Sump Gasket Replacement)
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2020
- Is your push lawn mower leaking oil on the front side of the deck? Learn step-by-step how to repair this problem for less than $10 on my Briggs and Stratton 5.5 Quantum!
Amazon Affiliate Link(s):
Gasket Maker: amzn.to/3E6XXmT
SAE30W: amzn.to/3hG5x0m
Ratchet: amzn.to/3X0kwSQ
10mm socket: amzn.to/3hLhq5e
13mm socket: amzn.to/3Ae6BPw
Ball Peen Hammer: amzn.to/3tuWEZX
Breaker bar (1/2 drive): amzn.to/3AeKTdT
14mm (1/2 drive) socket: amzn.to/3ExI9uE
Multibit Screwdriver: amzn.to/3UIHT1W
Disclaimer:
I am not an expert, just an average Joe who enjoys DIY'ing. JustDIY assumes no liability for property damage or injury incurred as a result of any of the info from this video. Use this information at your own risk. Due to factors beyond the control of JustDIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not JustDIY.
Thank you so much for the video it definitely helped me with my mower it was spewing oil like crazy and this was the fix that I needed to solve my problem thanks again!
Glad it was helpful! Thanks for your kind words. Cheers!
Great job and thank you so much for sharing! Special thanks for explaining the timing markers in the gears and slinger! Blessings and again thank you!!
Glad it was helpful! It can be a little overwhelming at first but sometimes just a little guidance can help empower you. Thanks for your kind comment. Cheers!
Thanks for this housing cracked around the drain plug so ill be repairing mine soon
Thanks for this video! Gonna be taking this on with your help, appreciate it!
You’ve got this!
wish i had watched this 2 days ago
I found a old Craftsman. My sump gasket was like yours....still going strong after 3 years. Its 2023
No issues on mine either!
What does it mean if the oil is coming down the shaft bit that the mower blade attaches to please help?
If it's coming down the shaft it is the bottom crankshaft seal that needs to be replaced.
If a small piece of plastic accidentally fell into where you add oil externally, could it be found and retrieved by opening up the oil sump like in this video? Thanks!
You’ll have a better chance of finding it, yes (assuming you haven’t run the mower).
I was able to remove the piece thanks to the help of your video! However, now the engine seems to have seized. The pull cord is hard to pull with the spark plug in, but pulls fine once the spark plug is removed. With this, I took off and cleaned out the carb, gas tank, and cleaned off the black junk that had built up on the piston. The piston will move up and down when the spinner is rotated. It does take some force to spin it, but it spins. There is also fresh oil in the engine. Any ideas what the issue could be? Thanks!
@@ariela51 hydro locked engine?
Did you drain the oil. Out before you turned motor upside down
Yes! Definitely do
That gasket was done poor but hope it worked!
Almost 2 years with weekly use and still bone dry!
My sump ain't coming off that easy
Great question, Ridge. Sometimes they do get seized on. Might help to try giving it some good swings with a hammer or small sledge. I've had to do that many times before myself.
Yeah this ole girl whooping my ass lol. I might try and drill the seal out. I'm putting a new sump on anyway
Yeah finally got it. Sometimes thinking easier to buy another. But that's not me. Ain't gonna let a lawn mower whoop me 🤣🤣😂😂
@@ridgerunner956 Happy to hear it! One step closer :)
Hey! Thanks for video! Same as other people, the blade mount doesnt get easy off😂 but warming it and two crowbar at same time it came off easy :)