MR JE C Servo with FX5U Part 1 (CC link IE Field Basic)
ฝัง
- เผยแพร่เมื่อ 22 มี.ค. 2020
- CC Link IE Field Network Basic is compatible Servo Amplifier MR-JE-C.
GX-Works 3 Parameter Setting
• Device Numbers Used For Read/Write Function
• Communication Start Setting
• Program Operation Modes - Velocity Mode
Device Numbers used to Write from Master station to servo Amplifier and to
Read from Servo Amplifiers to Master station
------------------------------------------------------------------------------------------------------------------------------------------
Program Sample At:
automationsolutions.tk/
automationsolutionz.blogspot....
Download Sample Section
------------------------------------------------------------------------------------------------------------------------------------------
To operate the amplifier in velocity mode switch amplifier to “Profile
Velocity Mode (pv)”.
• To Switch the amplifier to “Profile Velocity mode (pv)” write value ‘3’
(i.e. K3) to Control word (i.e. RWw00).
• After switching to “Profile Velocity Mode (pv)” write “Target Velocity”
to Speed Command (pv) (i.e. RWw00 + 07).
• While operating the amplifier in “Profile Velocity Mode (pv)”, the “Bit
No. 15” should be on with the start command.
• To start velocity movement write value ‘32895’ (i.e.K32895) in control
command. (i.e. RWw00 + 01).
• Depending on the sign of “Target Velocity” direction of movement will
be decide.
(i.e. Positive velocity Forward-Rotation,
Negative velocity Reverse-Rotation.) - วิทยาศาสตร์และเทคโนโลยี
Can you use Mr-J4-GF with FX5U the same way?
Hello, could you provide me with the manuals that appear in this video?
What are the first 2 lines for?
How Y177 and x177 is selected?
Dear sir thanks for always your support
What will be the controlword(6040) value for servo stop & speed change during servo running in pp mode
check 605Dh for stop during PP Mode
@@Technocrats91 The shaft also unlocks when I stop servo
GX-Works3 Ver. ??
I did not see MR-JE-C series in my Gx works3, I am usingV1.063R, please advise how to get required servo amplifier in network group
First update your gx works 3, after update if it doesn't show mr-je-c then you need to add profile manually in thst case download profile for mr-je-c from Mitsubishi site and add it to gx works 3
@@Technocrats91 Sorry for my stupid question but how can I update GX works or how can i add and where to download profile for the amplifier. I recently started working with Mitshubishi PLC so I'm pretty new to it so again, sorry for stupid questions. :)
@@nekilood422 follow the steps to download updates
th-cam.com/video/nKKgchmmEVE/w-d-xo.html
@@Technocrats91 how to add profile manually
how to turn SON ON.( Servo ON). Don't use CN3
in case of brake motor, how to make servo brake ON?
In case of Mitsubishi Servo Drive and Motor with brake, we have a dedicated output for brake known as "MBR" , you need to wire the brake through that output, drive itself will take care of brake.
please send manual which is shown in video (for RWw & RWr mapping)
@@ashitoshdhamankar2001 type MR-JE-_C
SERVO AMPLIFIER
INSTRUCTION MANUAL
(Network) on google
For Fx5U, in which word we get servo running pulses (Y0, Y1), Like D8340 in Fx 3U.
Does jack cn3 use
Can be used if required, like LSP, LSN, EMG Etc
Sound???
This is part 1 only , part2 ?
next part2 will be available by next week
th-cam.com/video/JmJsNKxD2Ro/w-d-xo.html
Can i have a mail id for communicat with you regarding mr-je-c ?
himanshutech13@gmail.com
Part 2 ??
Due to unavailability of MR-JE-C servo physically at present i am unable to make part 2, i will upload it soon.
th-cam.com/video/JmJsNKxD2Ro/w-d-xo.html
Under Settings Statement label...you have dmov k1000 to target velocity then how could other speed setting value move to target velocity