Mitsubishi PLC to PLC Socket Comm( Active & Passive)(SP.SOCOPEN, SP.SOCRCV, SP.SOCSND)
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- TCP (Transmission Control Protocol) establishes a connection to a device with a port number, and performs reliable data communication.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Program Sample At:
automationsolu...
automationsolu...
Download Sample Section
---------------------------------------------------------------------------------------------------------------------------------------------------------------
To perform socket communication using TCP, confirm the following in advance.
IP address and port number of the target device
IP address and port number of the Ethernet-equipped module
Which side will open a connection, the target device or Ethernet-equipped module? (Active open or Passive open)
SP.SOCOPEN : Establishes a connection. (CPU module dedicated instruction)
SP.SOCRCV : Reads the data received. (Read at END processing) (CPU module dedicated instruction)
SP.SOCSND : Sends data. (CPU module dedicated instruction)
Sir can you please make a video on socket configration with elobrated discussion
Please check the host IP address(192.169.3. 39) & sensor/device IP address (192.168.3.40) in active socket communication
At least you copied the program examples from the manual correctly. The first one is [MOVP H0 D0]. D0 - remembers the value 000H (Connection is opened according to the settings set in "External Device Configuration" of module parameter). In the second line [SP.SOCOPEN ″U0″ K1 D100 M100], the place of D100 should be D0.
please can i realise that between Q-PLc and FX3U-PLC? please i need your help
how can FX5U PLC data show in modscan without physical hardware and on simulation mode.
Not possible
You must connect with hardware
@@Technocrats91Ok but can you post for modscan communication with FX5U physical hardware?????
For GXWorks 3
How to Communication QCPU and FX5U over Ethernet?
Yoy can use Ethernet Simple plc communication
@@Technocrats91 can you show me please ,how to set up it
BGM Track name pls
this video convert to hindi.