How LZ got Jessy from the first Fast and the Furious on his crew is something I'll never understand. That dude knows more about vehicles at his age than some of the best builders in the world do. He's a savant with cars.
That voltage thing sounds super interesting. I'd think it would be more consistent unless there's like a bad ground, bad sensor, or too much movement in something
That was my thinking too, either a ground issue (which would be weird) or some movement in the sensor. Could also be some kind of interference since it's only at super high rpm, I wonder if shielding/moving the sensor wire could help
It might just be a voltage drop from the alternator at high rpm, you can see in the graphs as he revs higher the sensor voltage drops. I would check if the alternator voltage is dropping at a similar rate.
Couldn’t of said it better bro I’ve been here since the bmx days and just like Adam I went from bikes to cars and adams first cool jdm was a 4 door r32 and now i have a 4 door r33 ye yaaaa
Sadly most rtr bits would remove the GT350 only parts. The front of a GT350 is not swappable with a GT, that’s why people order Anderson Composites body kits to make their own clones because factory panels don’t swap!
for some reason ford always wanted to keep the v8 the flagship even in australia. right up until the sprint they left a lot a lot on the table with the barra and always understated the power and especially torque figures to favour the v8. we probably wouldn't have even got the xr6 sprint if the xr8 sprint didn't have a supercharged coyote. not as bad as holden though they overstated the lsx output ford australia always understated both the sprints had overboost by outputs were stated for worst case conditions.
ME degree and just took a course in controls, seems like you need some sort of solution to remove noise because that is a very big variance for a 5v signal. I recommend some sort of PID control to remove the steady state error and allow you to have much smaller voltage ranges for different gears. Filter like you said might work too ✌️
Biggest issue with these is overshoot and/or rise time. This means switching gears might take longer and the signal might jump to read too high for the right gear.
I miss the days this car was the daily/rental for when the homies were in town. So glad you haven't given up on it and stoked to see it back!! Would be sick if you brought it to FordFest!!!
The barra is perfect for roll racing. It’s cool seeing you branch off it and play with a couple straight line cars. It’d be cool to see Z-Roy at another burnout comp.
Is Australians approve! I love the fact you always mention it’s an Australian Barra 👌🏼🤘🏼 been following this build from day one! Cannot wait until it’s done! Special shout out to Scotty from haltec! MCM would be proud!
Gotta give a shoutout to Johan and Owen, the experience Johan has and the knowledge and machining skill that Owen has brought in has really brought the work to another level. Owen is killing it being new there
Dude that thing SITS with burnouts. This is probably my favorite sounding car you have. Maybe it would be more stable on the road with stiffer suspension 🤔
Now that the car is more dialed you gotta have Vaughn and Chelsea come to the compound to drive it! Or have them do the RTR Fun Haver angle kit on it and do up the suspension to make it more stable and less rocking boat like lol
Get wheels and tires and haul that bad machine over to McFarland fab for some drag suspension! That's your straight line car. Might even eff around and be faster than Cooper 😂
make it a god damn drift car already we all know you want to and what a better way for an rtr driver to spend his time, making the coolest and most badass mustang of the entire squad that's so crazily out of the box compared to all the basic and common v8 ones out there.
adams been needing goatee and chops his whole life it fits him wayy better. im 38 and can hrow facial hair for the life of be and recently in last year or so a little goatee starting and go figure starting to get gray hairs in it lol
I think with your last drag racing in the rotary car, you should definitely hit he drag strip with this also. Do another video with cleetus dialing it in on the track an maken it a good drag car since it's kinda perfect for it. I think you will do great drag racing if you practice it. Your a drive....... you can do it !!!!!!!
Hard to believe it has been nearly 3 years since the Barra build. I really thought this was cool when you were building it and disappointed that you were having problems and then the car kind of disappeared. Good to see it back.
As an Australian I am proud
same
Can confirm us Australians are proud of Adam!
Oath mate lol 🤙🏻
I’m fairly confident it was MCMs music tracks aswell!
Me too 💙🇦🇺
How LZ got Jessy from the first Fast and the Furious on his crew is something I'll never understand. That dude knows more about vehicles at his age than some of the best builders in the world do. He's a savant with cars.
When this car is ready, I hope Adam gets Vaughn's reaction to it.
Get the whole rtr team reaction drivers and crew
Loved him in Dodgeball
Throw some RTR parts on it too!!
Dang son
That would be amazing
South African Kiwi, have a Barra and absolutely love the engine. Would definitely wanna see you roll race this set up. Awesome content as normal bro
Would love to see the Barra do some roll racing!!!
agreed
I wish we got to see er do some racing in mexico 😉 maybe a 1320 x colab (ik adam is too popular to do it but i dream)
Facts! Would love to see the 2jz chaser & RB28 R32 do some roll racing too!
Do a Barra roll?😂
@@jono6379 🤣
Gotta love the Ol Aussie Barra and a bullet proof T56 combo, awesome to see it back out of hibernation.
Take the Barra Gt350 and the Datsun to the track for 1 epic session of drag racing. Maybe let Cletus feel the power of the Barra.
Cleetus cars have quite literally 3x the power as the Barra lol.
@@user-dw4cv3xq5utrue, but the power band would be extremely different
@@user-dw4cv3xq5u if only Cleetus could experience something like Kngfgx or the dynomite Ba that are making 2200-2600hp
@@bn468his big block smx makes like 5k hp so that’s still not much. And he now has a 1500 hp stick shift Supra
@@joshuaearnheart2756 I think it’s more the novelty factor and uniqueness of an engine not made in the states
The Barra Barge is fast becoming my favourite car / amphibious vehicle on the channel for sure! Can’t wait to see it roll race!
As a Aussie this was the reason why I started following you because of this build. Love to see some more content on this
Same only reason. I’m not interested JDM
This and the R34 GTR build
I'm Canadian and not a big fan of mustang, but also started watching channel because of it. Love straight 6s and aussies
Out of all the cars Adam has this is hands down my favorite
Agree!
As an Aussie it's pretty easy to imagine why I like it so much 😂
That Gate sounds so fucking good.
That voltage thing sounds super interesting. I'd think it would be more consistent unless there's like a bad ground, bad sensor, or too much movement in something
That was my thinking too, either a ground issue (which would be weird) or some movement in the sensor.
Could also be some kind of interference since it's only at super high rpm, I wonder if shielding/moving the sensor wire could help
Body ground = aids
It might just be a voltage drop from the alternator at high rpm, you can see in the graphs as he revs higher the sensor voltage drops. I would check if the alternator voltage is dropping at a similar rate.
Is signal noise from all the ressonance and vibration,
Filter or special wiring may solve the issue
It's getting to much noise which is causing the variance.
I forget the new member of team but dude knows his stuff and is humble can tell from him explaining , also kinda looks like Zach Bryan
PLZ either drag or roll race this thing its amazing, so happy you are going back to it!
I love hearing that tuning fork is helping on this, the GOAT
Can confirm, barras on gate is the only way to go 😂👌
If the gate isn't WIDE open you aren't even sending it
Yes, race it. I love when you dabble in other various types of auto sports. Such a well rounded channel.
Couldn’t of said it better bro I’ve been here since the bmx days and just like Adam I went from bikes to cars and adams first cool jdm was a 4 door r32 and now i have a 4 door r33 ye yaaaa
The GT350 is one of my favorite cars in your collection, glad to see it back! Also it looked like you had about 12 psi in your rears lol
As a Aussie and a barra owner. Barra the world☝️☝️☝️☝️
Would be good to see some RTR bits on this monster 🤯
Sadly most rtr bits would remove the GT350 only parts. The front of a GT350 is not swappable with a GT, that’s why people order Anderson Composites body kits to make their own clones because factory panels don’t swap!
gt350 is the highest trim level for that year rtr bits would look out of place imo
Yeah. RTR stuff would be a downgrade for this car lol.
As a ford guy apart from a Windsor can’t get a much better sound then a Barra
If you been around for awhile you know that facial hair adam is wild!
It's been a few months, I just moved in and started a new job. I've only been consuming stupid s***. This Adam is different 😂
Have not seen him for a yeah. Dang he has grown
I keep thinking of the line from Joe Dirt: You mean it just naturally grows in all white trashy like that? 😂
man’s growing up
Very proud Aussie moment love to hear the barra going off
Finally! My favorite build!
Adam LZ Awesome Video I'm glad your Barra Swapped Shelby GT350 is running well and I can't wait to see some awesome racing action
man this thing was rooowdy, i hope y’all put an trz anti roll bar kit on it, if you kept it on the slick
The Aussie answer to a 2j. Thing sounds amazing!
I think the bara should have been an option for the mustang trim. The sounds match this car perfectly. It sounds like a cobra!
Agreed for missed out there. Im sure us aussies would have liked a mustang barra aswell
It would replace the u.s. v6 and possibly outsell the gt and higher models.
@@justinmfw oh most definitely would outsell them but it would be so worth it.
@@narciso19G 100 percent would be worth it.
for some reason ford always wanted to keep the v8 the flagship even in australia. right up until the sprint they left a lot a lot on the table with the barra and always understated the power and especially torque figures to favour the v8.
we probably wouldn't have even got the xr6 sprint if the xr8 sprint didn't have a supercharged coyote. not as bad as holden though they overstated the lsx output ford australia always understated both the sprints had overboost by outputs were stated for worst case conditions.
Jerry and Drew from DCS ftw, they love rotaries also.
Sweet, been waiting for the Barra content!
With the fierce hissing of the wastegate, you should call it a Taipan!
This is my absolute favorite car of yours, Adam! Lover every single ep with it, watching at 1x and no skipping.
them shifts hit hard the 3, 4 rips
always a good day when adam uploads
If "When you didn't even know you wanted something until you see it exists" was a car... it would be this.
Would love to see some roll racing in the barra
Driving through the flooded driveway, the original burble tune.
Finally I’ve been waiting for the gt350 to come back!!
Cant wait to see the Barra do roll racing!!!!!!
Barras love rollies
ME degree and just took a course in controls, seems like you need some sort of solution to remove noise because that is a very big variance for a 5v signal. I recommend some sort of PID control to remove the steady state error and allow you to have much smaller voltage ranges for different gears. Filter like you said might work too ✌️
Biggest issue with these is overshoot and/or rise time. This means switching gears might take longer and the signal might jump to read too high for the right gear.
yessss i am so happy to see her
I miss the days this car was the daily/rental for when the homies were in town. So glad you haven't given up on it and stoked to see it back!! Would be sick if you brought it to FordFest!!!
More Cleet and Andy videos at the track for sure!
Take her to the drag strip🙆🏾♂️
The GT350 entering the Water at the gate reminds me of a snake underwater hunting for prey! So sick to see this thing rips now!
Finally!! Been excited to see more on this bad unit.
GT350 IS BACK BABYYYYY!
Stoked for the constant uploads 🤙
so glad its fixed
The barra is perfect for roll racing. It’s cool seeing you branch off it and play with a couple straight line cars. It’d be cool to see Z-Roy at another burnout comp.
If there is no JDM Audi's or lambos at any event the Barra should be ok 🤣🤣 they get bus gapped
I wanna see it in "THIS VS THAT"!
I been patiently waiting for barra content
Is Australians approve! I love the fact you always mention it’s an Australian Barra 👌🏼🤘🏼 been following this build from day one! Cannot wait until it’s done!
Special shout out to Scotty from haltec! MCM would be proud!
Gotta give a shoutout to Johan and Owen, the experience Johan has and the knowledge and machining skill that Owen has brought in has really brought the work to another level. Owen is killing it being new there
Dude that thing SITS with burnouts. This is probably my favorite sounding car you have. Maybe it would be more stable on the road with stiffer suspension 🤔
Now go break the sequential on the drag strip and put a powerglide in it. Get Cleetus to help and take it on a drag week like RMRW or Sick Week.
I would like to see this thing in some roll races
Sounds like you need a pull up/pull down resistor on the gear sensor to stop the voltage floating
Now that the car is more dialed you gotta have Vaughn and Chelsea come to the compound to drive it! Or have them do the RTR Fun Haver angle kit on it and do up the suspension to make it more stable and less rocking boat like lol
Goddamn I love this car. So glad to see it back in action 😍. Nice work Adam and the team. 👌
Bro this on some fpv wheels would be insane
shuold try to get it on THIS VS THAT with the HOONIGANS
Yes
Can’t wait to see this do a pull at a drag strip
Roll racing would be sick
Definitely go do some rolls🤜🏻🤛🏻🤘🏻🤘🏻
Roll racing would be sick
Love the Joe Dirt comin in nicely.
I was hoping to see this car again definitely one of my fav out the collection
I feel like owen needs to be mic'd up, can barely hear what he's saying. But he spits good info.
I love the Barra but dude this beard looking good! Better than only moustache imo :D
I definitely support roll racing sounds like it would make great content
ironically wearing my Barra gt350 shirt 👍
Almost ready for Hoonigan's THIS vs THAT
Was following this swap because I wanna do the same build in a MY20 FM auto and put the Ecoboost into my Mk2 Escort.
#barratheworld
Get wheels and tires and haul that bad machine over to McFarland fab for some drag suspension! That's your straight line car. Might even eff around and be faster than Cooper 😂
Take the Mustang to the dragstrip !!
make it a god damn drift car already we all know you want to and what a better way for an rtr driver to spend his time, making the coolest and most badass mustang of the entire squad that's so crazily out of the box compared to all the basic and common v8 ones out there.
The sideburns aren't the move, my guy.
I had an idea for a barra powered 1969 mustang fastback but someone grabbed the mustang shell I wanted now I’m waiting for another one
Definitely take it roll racing
yes to roll racing
Did LZ finally try the pot? Ive been gone for a week and now he looks like he just got off tour with Dead and Co 😂😂
Sounds so much better than a coyote.
I’m so tired of 2j swaps thank you for using the amazing barra.
adams been needing goatee and chops his whole life it fits him wayy better. im 38 and can hrow facial hair for the life of be and recently in last year or so a little goatee starting and go figure starting to get gray hairs in it lol
Adam LZ, I like ur content but im not used to seeing you with all that hair on your face, keep up the good work adam
I think with your last drag racing in the rotary car, you should definitely hit he drag strip with this also. Do another video with cleetus dialing it in on the track an maken it a good drag car since it's kinda perfect for it. I think you will do great drag racing if you practice it. Your a drive....... you can do it !!!!!!!
When you started to put you hand in that smoking control panel I audibly yelled "NO!"
Being an Australian, I'm proud of this. But please do an Aussie style tip in into a burnout. Pls!
Why do people search the barra doesn't sound good? I recon that sounds fkn MINT!
You need to go for a ride in the cleets rat rod supra
Take this to the drag strip with Cleetus!
Hell yeah, brother!
You should drag race all your cars
Bro Adam whatever you did to ur thumb, looks painful 😂
Hard to believe it has been nearly 3 years since the Barra build. I really thought this was cool when you were building it and disappointed that you were having problems and then the car kind of disappeared. Good to see it back.
Its the motor this car should have come with
I still think you have a monday motor, but it still rips
My fave car he owns
Sounds like the maccas carpark on a thursday night. I love it
I’m pumped to see the GT 350 content back! Glad it’s getting all sorted out. Roll racing would be sweet.