Testing 6 TEMU Woodworking Tools - Are They a Scam or a Steal?
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2024
- I recently unboxed these 6 tools and didn’t think I gave them a solid review. So after spending some time with them and taking note of their key features and functions I wanted to share them with y’all in this video. In this eye-opening video, join us as we dive deep into the world of Temu woodworking tools. We got our hands on six knock-off tools claiming to be the real deal, but suspicions arise about their authenticity and quality. With skepticism in mind, we put these dubious tools to the test, subjecting them to rigorous trials and evaluating their performance against their genuine counterparts. Will they deliver on their promises or crumble under pressure? Join us on this investigative journey as we unveil the truth behind these Temu woodworking tools. Don't miss out on this revealing experiment that aims to separate the scams from the steals!
Timestamps:
0:00 - Introduction
0:05 - Tool 1: T - RULER
1:38 - Tool 2: Precision Pocket Rulers
3:17 - Tool 3: Hand Chamfer Plane
5:26 - Tool 4: Cross Calibration 90 degree
6:35 - Tool 5: Square Protractor
7:36 - Tool 6: Spoke Shave
8:42 - Final Thoughts and Conclusion
Links to the products in this video: www.temu.com/
T-type Ruler Scribing Ruler: share.temu.com/srGWCJxWuEA
Pocket Ruler's: share.temu.com/YMHchixJKsA
Chamfer Plane: share.temu.com/pJYfVniWftA
Cross Calibration Ruler: share.temu.com/DZGGtkHvREA
Square Protractor: share.temu.com/zAeLOihTSlA
SpokeShave: share.temu.com/GKEVNXkowDA
Links to my other videos:
TEMU Tool Scam? Buying 5 Woodworking Tools: Unboxing, Review & Scam Investigation: • TEMU Tool Scam? Buying...
How To Fix A Warped Cutting Board Using An Iron!: • How To Fix A Warped Cu... - ภาพยนตร์และแอนิเมชัน
I always keep an open mind nd enjoy your skills. OI have 40+ years in craft and building experience. Primarily as a residential Carpenter with a lot of renovation which has exposed me to several different master whil\e mi was apprenticing along with coworking with hundreds if not thousands of mechanics. needless to say i have a treasure trove of experience and am still learning. Thank you for your demonstration. Brief and to the point looking fo2ward to more of your work.
Some years back most of my tools were stolen and until I found Temu I could not afford to replace all of them. I have found most tools from Temu are of better than average but some are just trash, they have a good return policy that I have used when needed. I have all the tools you reviewed and find them to be good enough for the work I do.
I'd make a suggestion but I'm more into 12-volt electrical and electronics at the moment. I will need woodworking tools down the track when I construct my canopy on my ute (truck) though.
I have some decent junction blocks, bus bars, and some great 10mm LED lights that come in a pack of 10 for a few bucks. The lights are shown in a couple of shorts I made a few nights back while enjoying a fire outside.
Great video again, mate.
Cheers.
The draw line ruler is for bringing your cut line around a corner. Sometimes you can only accurately mark your board to cut on one side. And sometimes that side isn't good for cutting on your table or miter saw. The draw line ruler is used to bring the line around the corner of the board accurately, so you can cut your board without needing x-ray vision to see the line you just marked.
Was the T-Square square?
What kind of woodworker thinks an innacurate ruler isn't a big deal?🤦♂️
I like this video a lot better than the one with the unboxing of the tools. Good to get your opinion on the tools. Too bad the measurements were off on some of them. That's a show stopper for me. Good to know though. Subscribed. Best of luck with future videos. Greetings from Sweden
Glad you enjoyed! I really appreciate the feedback! 👍
just a tip I hope you will consider that Using another of their squares is only useful if you have one. I always self check my work by either flipping the square 180 degrees and holding or drawing parallel line. Rember that an imperfection in the material can throw you off. if that is the case use math matical 3, 4 5 (4 6 8 etc ) method
make a square and measure diagonally for lenghty prject such a s squaring a building foundation
That's a great idea! Thank you for the feedback!
3 4 5 for square, round objects and 5 12 13 for longer shapes.
Wish they had an imperial one for the first one! I only use metric when 3d printing, electronics and small things.
Mostly garbage as you said at the opening... dont know how you can say that changer thing works well..the thing dug in and gouges the wood/crap...
Could you try out the router planes on Temu
Thanks
I ordered something from Temu once, it never showed up.
Have you tried any of their router bits by chance?
On my recent video, I bought flush trim bits, they are OK. You get what you pay for!
The "blades" in the planes are not bits, they're blades. The L shaped marking square is not a T square, the one that looks like a T is. You complain that the layout/marking tools require a mechanical pencil. If the holes were bigger, you'd lose precision. I'm no expert, but I don't think you should be reviewing tools.
Is the square accurate?? Why not evaluate that ? Is it square? Kind of fundamental check of if you claim to be assessing the value…
Are you referring to Tool 5: Square Protractor? It was indeed square, but the measurements were off.
Make yourself a bench hook.
Go to a rummage sale, get the stuff cheaper, better quality
Chinese must upgrade their FONTS. They look cheap now)
This video is a scam.
Dude didn't read the description of any of the tools he bought. Not the size, not the increments, not the material they're made of, nothing.
Claims Temu scammed him to buy more than his initial item. How did that happen?
He doesn't even know the correct names of most of the tools.
He's also deleting all the negative comments that have been left. Don't expect this comment to be up for very long. If you see it save yourself some time, and click away now.
Yeah, I noticed the same. He bought metric tools. He got metric tools. Temu "scammed" him. Whatever.
Hello there, thanks for your wonderful comment. Good news to you, I have not deleted any comments. I am learning from all the TH-cam- woodworking experts taking the time to type out these expert remarks.
Thanks for watching! Enjoy your day! Make sure you come back and review the next video! You are an inspiration 😍
Buy American made
That plane is trash. Knife can make a better chamfer.
If they are in metric rather than standard units, then yes, they are a scam.