To eliminate corrosion problems on connectors use heat shrink tubing instead of electrical tape. For more custom installation, cut out the extra length of wiring and redo the connectors with shrink wrap. Nice result.
I have been following you for a few weeks now. Added the finish piece to my muffler, and bought the organizer for my glove box. The spot light is gonna be the next thing. Thanks Bob!!!
decide what you else you want to do while your front bumper is off the car so you don't to drop the bumper multiple times. Fog lights?, turn signal bulbs? New emblems? Grill change?
@@jaycarl1562 Yeah....i just went in for a ultrasound and the liver is holding up. Not sure for how long though. The wine makes me a shit talker and i feel more comfortable. So yeah...
I love Jacksonville! Where 1 out 100 children under 5 will most likely be mutilated by a gator and 9 out of 10 homes will be under water by 2050. Welcome to the GX community!
I just installed my led kit last week! Thanks Bob for the video. My 2018 GX has the headlight washer and small fog/driving light on the bumper so I had to spend a little more time when removing the bumper. Overall, 5 stars for the instructions!
@@papano8717 Not if your engine is running. But if you’re referring to the switch light staying on 24/7 whether you’re using the light or not… I would advise against it. Tie it to your ignition or parking lights so the switch turns off when you leave the vehicle
If i can redo this, i would tie it to an ignitions or accessory source....not constant power such as the battery. This helps in case i forget to turn it off.
@@darronbell is not the switch you need to replace. It's the power source you need to redirect. The line I hooked up to the battery should go to a power source that only turns on when the car is on. And off when you shut off the vehicle.
Hi Mr. Bob, another fantastic video! As soon as finished watching your video, I had to order the the Bar Light, so AMAZON is using your footages for the how to videos! Congratulations 🎊 👏 I really hope your get some incentives from them! Again anything you do is Great and keep making more video 📹 please so I can be Unique Like You!
Bob i just purchased a 22 model and absolutely love your channel. i am looking to get body side molding. do u mind sharing the link of what u have it on your vehicle. thank you
Can you do a video on how to ground your fog lights so they can be controlled with the switch independently from the headlights. I want to be able to run my fogs by themselves.
I'm assuming you're talking about your OEM fog lights. Cutting off the power source and running it to a separate switch via your battery or ignition is not the hard part. The hard part is...once you cut it off from the OEM circuitry, what other anomalies will happen to your car's electrical system? It might be sharing a power source, a ground source, an inline resistor of some sort. We don't know unless we start chopping away. I've chopped away wires before and put them back to OEM and it caused the airbag lights to stay on. Stuff like that you gotta consider. Unfortunately, my model didn't come with OEM foglights so i can actually wire it from scratch using a toggle switch separate from the car's electrical system.
Do you think one can do it witout removing the bumper? Even if it is takes more time? I'm affraid of breaking the clips on my bumper corners since mine is 2010 they are a little old.
YOu can actually go from the top and place it behind your grill. There is a lot of space. Not sure how you would bolt it down because I haven't attempted it but I'm sure it can definitely be done.
@ 39:25 Sorry for the rookie question, but is that factory where the windows roll up and the mirrors flex in when you lock the doors with the key fob??? thanks Bob!!! (EDIT: Nm! I just found your write-up on it!!!!!!!). th-cam.com/video/eXdu6lx5bik/w-d-xo.html
Hi robert. If you click on the title of the video, it drops the description page down that also shows you the link. www.amazon.com/32Inch-Tri-Row-Wiring-Harness-Lighting/dp/B07Q365LCP
@@GXBOB I have the camera on the front of mine, so I was wondering are the part numbers the same or different? Because the holes for the camera and parking sensors.
Bob, I loved this installation, particularly that it’s stealthy, you really can’t see it unless you turn them on. Do you have to remove the front fascia to install it? Thanks Bob.
If you want an easy and cleaner install with accessibility, i would take the extra steps to get the bumper out of the way. Only around 20 screws you have to deal with and they're al easy to get to.
I would hate to say yes since i don’t have one to take apart at the moment but it may just take creativity on your part. The area i installed the light wasn’t made for the light but i just made it work. So far so good.
To eliminate corrosion problems on connectors use heat shrink tubing instead of electrical tape. For more custom installation, cut out the extra length of wiring and redo the connectors with shrink wrap. Nice result.
I have been following you for a few weeks now. Added the finish piece to my muffler, and bought the organizer for my glove box. The spot light is gonna be the next thing. Thanks Bob!!!
decide what you else you want to do while your front bumper is off the car so you don't to drop the bumper multiple times. Fog lights?, turn signal bulbs? New emblems? Grill change?
How many times he said "It's not going anywhere" Lol. Nice job , clean and really looks OEM
You're making me self conscious
He created a how to vid and gave us a drinking game vid at the same time! ONLY GX*BOB CAN PULL THAT OFF!
@@jaycarl1562 Yeah....i just went in for a ultrasound and the liver is holding up. Not sure for how long though. The wine makes me a shit talker and i feel more comfortable. So yeah...
“Holy Smokes!” Nice job man! Very well done.👍
Hey thanks CP !
As Always...Bob has the Classiest Gx460 Channel on the Tube. Great vid Bob. Thanks for posting.
Hey Gipstetz, like always thanks for commenting!
Always something to learn , keep up the good mods , thanks
thanks ibrahim !
Getting my gx soon and you've been inspiring me a ton with these videos. This shit is great. High five from Jacksonville Florida
I love Jacksonville! Where 1 out 100 children under 5 will most likely be mutilated by a gator and 9 out of 10 homes will be under water by 2050. Welcome to the GX community!
@@GXBOB I see no lies haha appreciate it
Going to tackle this in the next few days. Always good vids 🙌
Do the raptors!!!
I just installed my led kit last week! Thanks Bob for the video. My 2018 GX has the headlight washer and small fog/driving light on the bumper so I had to spend a little more time when removing the bumper. Overall, 5 stars for the instructions!
So....in your opinion , was it easy?
@@GXBOB Yes! Your instructions are super easy to follow. Thanks again!!
@@GXBOBhi BoB if you hook it up to the battery and the switch light stays on will it drain off your battery? Please
@@papano8717 Not if your engine is running. But if you’re referring to the switch light staying on 24/7 whether you’re using the light or not… I would advise against it. Tie it to your ignition or parking lights so the switch turns off when you leave the vehicle
@@GXBOBthank you
Thanks bro ! I’m found it I’m been looking how to thru engine to pedal
The rubber grommet at the driver side firewall?
Thanks, as always, Bob!
Any time Knaudi !
Bob - Great job, keep up the videos! I’m waiting for an apple car-play or Telsa style radio install!
i would install the tesla radio before i ever do a apple carplay. I hate apple.
Again, great job and thank you , Bob !
No problem my man !
Holy smokes you got a winner... thanks for sharing.
That lightbar has saved me numerous times.
Bob is the Man! Thank you for another outstanding video.
If i can redo this, i would tie it to an ignitions or accessory source....not constant power such as the battery. This helps in case i forget to turn it off.
@@GXBOB have you found a place that sells accessory light switches to fix the gx460?
@@darronbell is not the switch you need to replace. It's the power source you need to redirect. The line I hooked up to the battery should go to a power source that only turns on when the car is on. And off when you shut off the vehicle.
@@GXBOB can you show this? Or, point me to the right location if I want to use an accessory power source.
Hi Mr. Bob, another fantastic video! As soon as finished watching your video, I had to order the the Bar Light, so AMAZON is using your footages for the how to videos! Congratulations 🎊 👏 I really hope your get some incentives from them!
Again anything you do is Great and keep making more video 📹 please so I can be Unique Like You!
The bar light makes a huge difference!
Thank you so much Bob! Been looking for a solution like this.
No problem man!
Cool cat Bob. I love your videos.
Glad you like them!
Bob i just purchased a 22 model and absolutely love your channel. i am looking to get body side molding. do u mind sharing the link of what u have it on your vehicle. thank you
All my links are below each of my videos. I have more than 200 videos so that would take me till xmas 2024 to copy and paste everything.
@@GXBOB Really great to have a response from a big shot havng 200 videos. if you can please help and guiding me to the video for body side molding.
Great job again Bob👊🏼👏🏼
Thanks man!
Can you do a video on how to ground your fog lights so they can be controlled with the switch independently from the headlights. I want to be able to run my fogs by themselves.
I'm assuming you're talking about your OEM fog lights. Cutting off the power source and running it to a separate switch via your battery or ignition is not the hard part. The hard part is...once you cut it off from the OEM circuitry, what other anomalies will happen to your car's electrical system? It might be sharing a power source, a ground source, an inline resistor of some sort. We don't know unless we start chopping away. I've chopped away wires before and put them back to OEM and it caused the airbag lights to stay on. Stuff like that you gotta consider. Unfortunately, my model didn't come with OEM foglights so i can actually wire it from scratch using a toggle switch separate from the car's electrical system.
Do you think one can do it witout removing the bumper? Even if it is takes more time? I'm affraid of breaking the clips on my bumper corners since mine is 2010 they are a little old.
YOu can actually go from the top and place it behind your grill. There is a lot of space. Not sure how you would bolt it down because I haven't attempted it but I'm sure it can definitely be done.
Very clean install!
Thanks Casey. I seriously thought about sticking it on the roof rack but i just couldn't do it.....
@@GXBOB that would just be lunacy without a proper rack first
Hi Bob... Thank you for your videos. Did you try to install fog light ? I am looking a video how to install/upgrade my fog lights on GX460
I'm looking for a good deal on those. They're still very expensive.
Great stuff Bob
thanks Joe!
@ 39:25 Sorry for the rookie question, but is that factory where the windows roll up and the mirrors flex in when you lock the doors with the key fob??? thanks Bob!!! (EDIT: Nm! I just found your write-up on it!!!!!!!). th-cam.com/video/eXdu6lx5bik/w-d-xo.html
Great Video, Anyidea where I can get the same set up in Amber? Thank you
auxbeam.com/collections/led-light-bars-by-size-30-39-inch/products/zd000654
Can you remove the switch and replace with one that fits a blank panel? That way it blends with the other switches
Absolutely, if you’re experienced in electrical know-how, then you can just cut off the current switch and rewire to a oem switch.
I love this light
i was actually pretty impressed with it. Damn lights up the entire neighborhood.
@@GXBOB tell me the name again and where u got it please.
Do you ever think about install oem fog light?
eventually. but it would be more for cosmetic reasons, not because it makes the road brighter.
Great video, I plan on doing this to mine very soon. Did you purchase the 25 or 32 inch version?
I placed a link to the one I bought under the video. I believe it’s the longer 31”
Hey Bob where can I buy the same light at. Just picked up my new 2022 gx and itching to do some mods. Your videos are great and motivating
Hi robert. If you click on the title of the video, it drops the description page down that also shows you the link.
www.amazon.com/32Inch-Tri-Row-Wiring-Harness-Lighting/dp/B07Q365LCP
Any thoughts on OEM fog lights install? Everything I find online seems to complicate it, you would probably make it so simple lol
I'm actually trying to secure a foglights with housing as we speak
Great video!
It was also fun to do Anthony!
Thank you 🙏
You’re welcome 😊
Hey bob just got a gx460 need help upgrading the grill.
The grill uploaded video is pretty straight forward. What do you need help with?
@@GXBOB I have the camera on the front of mine, so I was wondering are the part numbers the same or different? Because the holes for the camera and parking sensors.
@@Nathan_Visual_Productions if you go to the grill upgrade video there’s quite a few people talking about that in the comments section.
Awesome video! Did you ever find that push pin that fell? Lol
I actually did! Haha
Bob, I loved this installation, particularly that it’s stealthy, you really can’t see it unless you turn them on. Do you have to remove the front fascia to install it? Thanks Bob.
Yes. Accessibility is critical to any installation.
Will water leak through the grommet.
I haven’t had an issue with leakage or light failure yet. Had these for awhile now
Great video do you have the link to buy the light
In the description
Bob please give me a call I have a question for the front grill emblem
My number 562-481-4425
@@hangouk7442 Sorry Hang, i didn't see your comments till now. I'll try to give u a call when i get home from work today. 5/12/21.
Thank you :)
Any time Eric, good to see you on here often.
This is really awesome install. Bob, do you really have to remove the bumper?
If you want an easy and cleaner install with accessibility, i would take the extra steps to get the bumper out of the way. Only around 20 screws you have to deal with and they're al easy to get to.
Another great video, Bob. Do you have to take the front bumper off to install the LED light bar?
If you intend to install in the same location I did then it's a must.
Will this for for a GX 2013 460?
I would hate to say yes since i don’t have one to take apart at the moment but it may just take creativity on your part. The area i installed the light wasn’t made for the light but i just made it work. So far so good.
Will this light bar has moisture issues for you? Thanks!
NO they are water proof. I have never had an issue since the installation.
@@GXBOB Thanks and thank you for your video! I plan to install it this week.
@@jacobhu89 probably one of the best investments i made was this light bar.
How much for that my friend
Hi Bao. There's a link below including a 10% off code in the body of the description.
Did you end up connecting the one off switch wires to your Auxbeam switch panel?
Nevermind, I did see it. Thanks anyway
@@art2lyd12 yes i eventually tapped all my lighting to the auxbeam. Cleaned it all up.
❤
This might be a cool upgrade for the GX: th-cam.com/video/vGwIQfG65HE/w-d-xo.html
I agree. I am currently selling my vehicle to continue doing upgrades to a different year GX460 as we speak.
Open up a shop or offer service. I need help, I'd buy all the mods so far for my 15GX. "Bob's OEM Lex Shop"
I'd go broke because i would do everything for free. Can't imagine doing this as a full time job. Its a weekend hobby.