Hi, Peter, I love your videos and it has helped me a lot. You describe stuff in a very effluent way. I have the same car as in this video, but a different problem. I tried to find if you have covered it, but no luck. As per my research my Speed Sensor [not the idle speed sensor (which controls the RPM meter)] is malfunctioning. The problem I am facing: - Put my key to ON position and my speedometer shows 20-40 KM/H reading. - When I am driving the car to normal conditions, it keeps floating between 20-180 KM/H abruptly. - Even in traffic jams it is constantly above 20 KM/H. Can you tell me if I have got to a correct conclusion? Also If you can like make any video illustrating how to diagnose the sensor, and also replace it in case it is faulty it would be very helpful. I would be very thankful of yours if you do that. Thanks a lot for your hard work!
2007 Toyota Corolla my speedometer still works but the vehicle rev out high wen I drive it . Code p0500 .and I had replaced the output sensor and same thing .
@@PeterFinnTheCarDoctor Thanks have found the connections in the diagnostics box. The motor increases speed when l connect the two positions in the diagnostics box but my corolla idles rough even after cleaning the throttle body
Hi Peter, I got a problem with my 4afe 1995. The idle is so good. It is very steady but whenever I will turned on my aircon, the rpm will drop from 800 to 700rpm. I would like to ask what are the things I need to check? I just think that it would be related to IAC valve. Thank you in advance.
bro, with ac on idle 700-1000 rpm is acceptable idle 800 with ac off and ac on goes to 700 means IAC is working normally, if IAC is bad it already stalled
Hi Peter You applicated the idle speed control by diagnosis with the cable. Was the engine hot or cold ? or Does it metter cold or hot to check it . Does work idle speed when the cold or hot time changes cold or hot mode.
Hello Peter, I followed this video and it did not work. I changed the idle sensor and still did not get the results you are getting. Is there another way to test? I have a AE111 which was originally a 4A-FE but now a 5A-FE. Many thanks in advance.
HI Peter ihave toyota corolla model 98 .when i start my engine my idle speed is getting more 1500 after around 10 monutes.back to 1000 .and when the engine hot the idle speed gp down to 700
Hi, Peter, I don't know if you know about '94 Toyota Coronas, but I have a problem and think you know the answer. My car has been sitting since the beginning of the Pandemic, and now the Speedometer is not working. Could you please help me solve it?
Hey peter i swaped my car with same engine but it doesnt have a cheack engine light since the engine was swaped from 1.3 carburater to 4afe so how can i put a check engine light so i can se the codes plz help 😊
Hi peter ..a quick question can i change my speedometer to digital do i need change the speed sensor to electric on the gearbox .and yes then where to connect it on ecu ...i was thinking to diy a dash using motocycle digital screen ..and it came with a 3 wire sensor with magnetic sensor
Can anyone try this test and leave the wires connected for like 15 seconds and see if the engine rpm increases for the full 15 seconds? On my car the rpm increases for about 5 seconds and then returns to normal while the wires are still connected. I'm wondering if my IAC is defective and needs replacing. Any info would be greatly appreciated.
Our Starlet 4EFE always started with 2000rpm's idle when its cold. Since this 2 weeks its starting with 1100rpm's cold engine. Even now in September. Car had big maintanance in April and last week the sensor for incoming air was replaced but didnt helped. You got any idea?
Hi peter. I have Toyota Corolla 1997 engine 1.6 I went to auto zone for check engine. The check with machine. Code number P0125 it’s mean oxygen sensor. I bought online oxygen sensor and put it. After 10 minutes Check engine light come back. I went to again to the auto zone. The check with machine the said upstream oxygen sensor have problem. When I put oxygen sensor the car burnout? This case. What is problem of my car. Still check engine on. Do I need change fuel injectors spark plugs and fuel filter ?
When i start my corolla engine when cold the fast idle speed is 2000 rpm for a few soconds. Is that normal for these cars or do i need to do a fix on it?
Hello, I did the same procedure, the revolutions go up and then go down on their own without me having removed the cable. Do you think the idle valve is the problem?
I’ve got a 02 CE 1.8liter with a Manuel trans. My Speedometer doesn’t work and I’m having a heck of a time trying to find the censor. Where can I find it? The one I ordered doesn’t look like the one that’s on it
Hi, I have the Toyota with 4efe engine, now these days sometimes the idle goes 2000rpms from cold, the most times was normally about 1300-1200 from cold, what do you think? the iacv is faulty? Thanks in advance.
Hi Pete I have a Toyota starlet 4efe. It goes sluggish and putts on take off and up hills and almost stalls, I have replaced fuel filter and checked plugs they are fine ,it feels like fuel delivery but I undone nut at end of fuel rail like u show in your video and petrol seeped out , so could it still be fuel pump or do the symptoms sound like throttle position sensor?
hi peter i have a toyota corolla 1.6 1993 can i ask a question . my problem is smoke in the first start of engine . the smell of smoke is gasoline i think is over feed of gasoline . when the engine is in operating temperature the smoke will gone .. what is your diagnosed in my corolla. tnx .
Hello freind 👍.I have a problem with my speedometer on Toyota carola E110,, when I drive it it Starts going crazy moving from all they left to all the way right frantically...Was wondering if you know what that is???thanks 👍
hi, peter i Have TOYOTA ae100 engine 5a, each time when i on the aircind the rmp picks up ok but after while after driving the rmp drops and the car become under power. what can i do
Hello Peter.. my car registers two error codes. Error code 12 and 52. I took the car to the mechanic and he replaced the knock sensor (original Toyota part). On the way home the check engine light turned on again, same error codes - 12 and 52. I noticed that every time I turn the car on, the check engine light is off, after idling, the check engine light turns on again - same codes. I removed and cleaned the throttle body and the IAC - now I get one error code only - error 52. When I follow the testing on this video, I connect the wires, the motor speed becomes higher for about 4 seconds and then returns to normal - even though the wires are still connected. Any help would be greatly appreciated.
o.k thank you. When I connect the wire like in this video, the motor speed becomes higher but returns to normal after about 4 seconds - while the wires are still connected - so maybe IAC is defective ? The car is still in the mechanic - any info will help.
Commenting on this video is FREE, but if you have technical questions for me, I charge a small fee for answering them, normally 5 USD $ per question. I am a true Technical Professional, Black Belt in engineering and The Car Doctor! Enjoy and ask. I'll answer professionally. So, if you have question: You pay 5 USD $ via the THANKS button below the video to me. Normal question costs 5 USD $ / per question. Make the payment and I will then give you a professional answer.
thank you, but my problem is too much high idle i try to adjust my idle screw but the screw is on the the top so there is no chance to lower my idle, i hook up wire and gives me code 21 and 41
thank you for reply sir, but what I mean is when I insert the cable in the diagnostics, my engine idle go down not up. does it mean my idle up sensor is broken?
oh thanks i was looking for this, what peter meant is, you remove the iacv sensor. with 2 screws.. then the magnetic rotator. you rotate to other direction, then return the sensor and test again.
Hi Peter... i want to ask one question. I have the Same Car 4afe 1600cc Auto Transmission. Whenever i drive my car and shift from one geat to two and two to three it goes perfect but when i release accelerator RPM drops suddenly and then it sets back. It drags the cars down and then back to normal. What can be the problem?
I never listen to this cant understand him he doesnt post what engine he is working on he placed a paseo post about idddeel speed adjustment 92 and up my car was stolen so mom gave me her 92 paseo with 5efe engine im a ragtop man never looked at a rice burner engine in my life so I dont know its a 4 he says paseo 92 and up it only came with a 5efe he shows me to work on iddddle speed screw on a 4ef? you dont touch that on a 5efe its up on top near tps I spent years trying to figure out how to sink it all back right the dealerships here dont work on ob1 they dont know how the techs are to young and Peter on the diagnostic port underneath the cover is a diagram that most of people would like to know what the wires you are connecting to te1 to e1 ect this one to that one is where I gave up again but I will admit its a damm good car ive replaced all the sensors distubutor and cap wires plugs motor mounts fuel filter tires cv axles trans flush tps got a fsm get 35mpg now to cut off the roof
I am from Iraq who follows you. You are a wonderful person
exelent video bro, I LOVE the toyota corolla to, My is 1997 & 101.000 miles and run like a champ. many thankssss
Thanks. Good info. :-)
443.000 miles still going strong
Hi, Peter, I love your videos and it has helped me a lot. You describe stuff in a very effluent way. I have the same car as in this video, but a different problem. I tried to find if you have covered it, but no luck. As per my research my Speed Sensor [not the idle speed sensor (which controls the RPM meter)] is malfunctioning. The problem I am facing:
- Put my key to ON position and my speedometer shows 20-40 KM/H reading.
- When I am driving the car to normal conditions, it keeps floating between 20-180 KM/H abruptly.
- Even in traffic jams it is constantly above 20 KM/H.
Can you tell me if I have got to a correct conclusion?
Also If you can like make any video illustrating how to diagnose the sensor, and also replace it in case it is faulty it would be very helpful. I would be very thankful of yours if you do that. Thanks a lot for your hard work!
HI, Your car speedometer is bad. Needs to be replace. Look info on speed meter. Video link: th-cam.com/video/Y5I-mlueKnc/w-d-xo.html
How are you so sure that the speedometer is bad, not the sensor?
TriumphTruth i have the same car n same problem but the o/d light came one is this a bad selenoi
I had that experienced, in my case i changed speedometer cable, the long one.
I really like your videos. Very educational 👍👍👍
Thanks! 😃
2007 Toyota Corolla my speedometer still works but the vehicle rev out high wen I drive it . Code p0500 .and I had replaced the output sensor and same thing .
Great work. What if the idle speed becomes lower when you do this? What does that mean?
Thanks for comment. 😀👍
Hi great videos which terninals did you jump
Thanks for comment. 👍
Thank you Peter for the informative video , can you kindly name the two points that you are connecting
Which ones?
@@PeterFinnTheCarDoctor Thanks have found the connections in the diagnostics box. The motor increases speed when l connect the two positions in the diagnostics box but my corolla idles rough even after cleaning the throttle body
Hi Peter, I got a problem with my 4afe 1995. The idle is so good. It is very steady but whenever I will turned on my aircon,
the rpm will drop from 800 to 700rpm. I would like to ask what are the things I need to check? I just think that it would be related to IAC valve. Thank you in advance.
Hi, your compressor or engine is worn out and old. Please replace first compressor, then the engine.
@@PeterFinnTheCarDoctor I don't think that is the definitive answer.
bro, with ac on idle 700-1000 rpm is acceptable
idle 800 with ac off and ac on goes to 700 means IAC is working normally, if IAC is bad it already stalled
@@PeterFinnTheCarDoctor why would the engine be bad ? Doesn’t make sense dude
Did you end up finding out what was wrong?
Hello sir. What can the best i do for my idle..??when i turn on the aircon. The idle is going down.. what is the possible cause of this??
Hi Peter You applicated the idle speed control by diagnosis with the cable. Was the engine hot or cold ? or Does it metter cold or hot to check it . Does work idle speed when the cold or hot time changes cold or hot mode.
Yes
@@Rubenolveda Hi you answered yes . İs it hot or cold please write hot or cold
I like the doctor/patient comment as I fix my very old and tired 1996 Corrolla
Thanks for Your info 👍😀
Hello Peter, I followed this video and it did not work. I changed the idle sensor and still did not get the results you are getting. Is there another way to test? I have a AE111 which was originally a 4A-FE but now a 5A-FE. Many thanks in advance.
HI Peter ihave toyota corolla model 98 .when i start my engine my idle speed is getting more 1500 after around 10 monutes.back to 1000 .and when the engine hot the idle speed gp down to 700
I have same issue like you did you know the problem?
@@alrayesbob7213 normal
@@rehanaziz3839 thank you
What number? E1? T1? You never said!
Hi, Peter, I don't know if you know about '94 Toyota Coronas, but I have a problem and think you know the answer. My car has been sitting since the beginning of the Pandemic, and now the Speedometer is not working. Could you please help me solve it?
Hey peter i swaped my car with same engine but it doesnt have a cheack engine light since the engine was swaped from 1.3 carburater to 4afe so how can i put a check engine light so i can se the codes plz help 😊
U have to wire the ecu up with check light.
Hi peter ..a quick question can i change my speedometer to digital do i need change the speed sensor to electric on the gearbox .and yes then where to connect it on ecu ...i was thinking to diy a dash using motocycle digital screen ..and it came with a 3 wire sensor with magnetic sensor
Can anyone try this test and leave the wires connected for like 15 seconds and see if the engine rpm increases for the full 15 seconds? On my car the rpm increases for about 5 seconds and then returns to normal while the wires are still connected. I'm wondering if my IAC is defective and needs replacing. Any info would be greatly appreciated.
Good info and Thanks ! :-)
Im having the same problem, what was your issue ?
Our Starlet 4EFE always started with 2000rpm's idle when its cold. Since this 2 weeks its starting with 1100rpm's cold engine. Even now in September. Car had big maintanance in April and last week the sensor for incoming air was replaced but didnt helped. You got any idea?
Maybe throttle valve is bad / stuck
Hi peter.
I have Toyota Corolla 1997 engine 1.6
I went to auto zone for check engine.
The check with machine. Code number P0125 it’s mean oxygen sensor.
I bought online oxygen sensor and put it.
After 10 minutes Check engine light come back.
I went to again to the auto zone.
The check with machine the said upstream oxygen sensor have problem.
When I put oxygen sensor the car burnout?
This case. What is problem of my car. Still check engine on.
Do I need change fuel injectors spark plugs and fuel filter ?
When i start my corolla engine when cold the fast idle speed is 2000 rpm for a few soconds. Is that normal for these cars or do i need to do a fix on it?
Normal
Hello, I did the same procedure, the revolutions go up and then go down on their own without me having removed the cable. Do you think the idle valve is the problem?
Noted 👍
Hi Peter. The Japan Toyota Corolla 5a engine right hand drive, is the same as the American 5a engine left hand drive ? (distributor)
Yes
I’ve got a 02 CE 1.8liter with a Manuel trans. My Speedometer doesn’t work and I’m having a heck of a time trying to find the censor. Where can I find it? The one I ordered doesn’t look like the one that’s on it
Noted 👍
Hi,
I have the Toyota with 4efe engine, now these days sometimes the idle goes 2000rpms from cold, the most times was normally about 1300-1200 from cold, what do you think? the iacv is faulty? Thanks in advance.
Throttle body is stuck.... you need new
@@PeterFinnTheCarDoctor Throttle body works fine no stuck..
Hello Peter, my Corolla with 7afe will not start. I am getting code 12- Engine speed rpm sensor. Any idea where this sensor is located?
Noted
How to diagnose jumpere this card..what number diagnose
peter finn what is the causes after jumping the 2 terminal and no rpm change and testing the iac valve with power and ground it works
Hi, please do video. I like see your engine working.
What causes engine fan stoped, when you turn off aircondition?
Engine fan did work if i turn off the aircondition. If i turn on the aircon. Both fan works again..
@@angelaromu9951 it's normal
Hi Pete I have a Toyota starlet 4efe. It goes sluggish and putts on take off and up hills and almost stalls, I have replaced fuel filter and checked plugs they are fine ,it feels like fuel delivery but I undone nut at end of fuel rail like u show in your video and petrol seeped out , so could it still be fuel pump or do the symptoms sound like throttle position sensor?
Hi, have You measure pistons compression rates
@@PeterFinnTheCarDoctor no ? But what would cause the compression to drop? If the compression is low?
Did you ever figure out the issue? I’m having the same issues..
My 1994 Toyota Corolla 1.6 EFI I idling rough then stalls but drive fine when keep the revs up is this my problem? Pease help
Hi there , so if the idle drops ? Does it mean the solenoid is faulty.
Message read, good comment 👍
Corola 2006 not sudden racing so not pickup then what i do. Please send me a suggesstion
hi peter i have a toyota corolla 1.6 1993 can i ask a question . my problem is smoke in the first start of engine . the smell of smoke is gasoline i think is over feed of gasoline . when the engine is in operating temperature the smoke will gone .. what is your diagnosed in my corolla. tnx .
Hi, your engine consumes oil. It is normal for old car.
If motor speed/RPM become lower after connect the cable to Te1 and E1 pin its mean the idle speed sensor working properly?
Sounds bad.... I don't do any wire connections.
+Peter Finn on that video, its look you connect the copper wired to the connector then motor become higher, its good?
Hi Peter How many total sensors in this model?
One
@@PeterFinnTheCarDoctor sorry? How one? I meant how many total sensors install kindly tell me the names separately
Hello freind 👍.I have a problem with my speedometer on Toyota carola E110,, when I drive it it Starts going crazy moving from all they left to all the way right frantically...Was wondering if you know what that is???thanks 👍
Yes, you need a new dashboard
@@PeterFinnTheCarDoctor Okay cool 😎...Also I was thinking it could be the speed sensor on transmission maybe...Cool have a good one 👍...
Sir how to check TP sensor is ok or not?
Thanks for comment 😀👍
hi, peter i Have TOYOTA ae100 engine 5a, each time when i on the aircind the rmp picks up ok but after while after driving the rmp drops and the car become under power. what can i do
You need new pistons or piston rings
Thank you
Thanks for Your info 👍😀
hey peter, if you restrict air in the throttle tube, will the engine die? if not is there a posiblity of vacuum leak?
Well, the restrict in throttle tube die the engine. And too much air too, like leak
Hello Peter.. my car registers two error codes. Error code 12 and 52. I took the car to the mechanic and he replaced the knock sensor (original Toyota part). On the way home the check engine light turned on again, same error codes - 12 and 52. I noticed that every time I turn the car on, the check engine light is off, after idling, the check engine light turns on again - same codes. I removed and cleaned the throttle body and the IAC - now I get one error code only - error 52. When I follow the testing on this video, I connect the wires, the motor speed becomes higher for about 4 seconds and then returns to normal - even though the wires are still connected. Any help would be greatly appreciated.
Hi, I do tests too
o.k thank you. When I connect the wire like in this video, the motor speed becomes higher but returns to normal after about 4 seconds - while the wires are still connected - so maybe IAC is defective ? The car is still in the mechanic - any info will help.
I have toyota soarer code twelve [ 12 ] is Crank sensor.
@@zataralasname8833 Did you find the solution?
I have a cold start issue I tried changing map sensor didn't work i cleaned ice valve Same problem
Commenting on this video is FREE, but if you have technical questions for me, I charge a small fee for answering them, normally 5 USD $ per question. I am a true Technical Professional, Black Belt in engineering and The Car Doctor! Enjoy and ask. I'll answer professionally.
So, if you have question: You pay 5 USD $ via the THANKS button below the video to me. Normal question costs 5 USD $ / per question. Make the payment and I will then give you a professional answer.
Love It!
Thanks for feedback ! :-)
hi peter when i connect wire on that diagnose my idle becomes lower is that a sign of faulty Air control valve?
Hi, it is normal.
thank you, but my problem is too much high idle i try to adjust my idle screw but the screw is on the the top so there is no chance to lower my idle, i hook up wire and gives me code 21 and 41
when i unplug the TPS sensor while the engine is running the rpm raise @1400 rpm pls help me my engine is a toyota 7k-e angine MT
Hi, maybe you should purchase new throttle body.
Great job
Thanks for comment. :-)
can it be left connected?
Yes
How many model is this corolla ?
93-97 looks like 1.8
@@joecostu1571 from turkey ı have got 96 ae101 corolla 1.6 105 hp
@@mustafacrt7692 got a 93 corolla dx with 1.8 7f4. That car got the 1.8. Or 1 .6 engine
Thanks for comment 👍
Help me guys ae101 1.6 corolla 114 hp rev limiter 5.500 rpm working how to cancel the red line ?
👍
Hello my car Corolla 92 its start but not work .. what i do for it ?
Ok, maybe low compression
@@PeterFinnTheCarDoctor explane more please
what if when doing that, the idle goes down instead?
Rotate other direction.
thank you for reply sir, but what I mean is when I insert the cable in the diagnostics, my engine idle go down not up. does it mean my idle up sensor is broken?
oh thanks i was looking for this, what peter meant is, you remove the iacv sensor. with 2 screws.. then the magnetic rotator. you rotate to other direction, then return the sensor and test again.
any ideas why my corolla shakes on 4 gear when i accelarate?
Engine mounts probably
Hi Peter... i want to ask one question. I have the Same Car 4afe 1600cc Auto Transmission.
Whenever i drive my car and shift from one geat to two and two to three it goes perfect but when i release accelerator RPM drops suddenly and then it sets back. It drags the cars down and then back to normal.
What can be the problem?
Ok, maybe engine is old and bad?
Peter Finn engine is perfect but i have changed the injectors for better fuel mileage.
What can be the problem?
Is it normal that I have 1200rpm on cold start?
Yes
@@PeterFinnTheCarDoctor and the idle up is not working when it's not on normal operating temperature?
hi peter my car is toyota gli 94mdel. when I reach the 3 to 4k rmp its dropping.. can you give me an idea what going on with my car.. thank you.
one more peter if the rpm drops the check engine light comes out...
Please, do video to me. I listen then.
What number sir in dianostic ?
I read your text and Thanks for comment. 👍😀
How to scan manually,to find out the mile code
Well...
where is the ECU locate at on a 1993 corolla
+Kong Xiong Hi, I need to do new video in future. :-)
underneath ac system,you should see it beside the clutch pedal
Thanks
Great info my Friend. :-)
what was the cause
The rust and corrosion.
Arear or Area? You always say the word arear.
Thanks. Area
Where is it Sensor CKP posision
Thanks 😀👍
I want the one for Toyota Denso
Good 👍
My Toyota Corolla e110 gives problems about engine
Thanks for comment 👍😀
normally 7000 rpm should work
You're welcome 😃
@ehap El-Shafie
👍
Es wes means issues
👍
I never listen to this cant understand him he doesnt post what engine he is working on he placed a paseo post about idddeel speed adjustment 92 and up my car was stolen so mom gave me her 92 paseo with 5efe engine im a ragtop man never looked at a rice burner engine in my life so I dont know its a 4 he says paseo 92 and up it only came with a 5efe he shows me to work on iddddle speed screw on a 4ef? you dont touch that on a 5efe its up on top near tps I spent years trying to figure out how to sink it all back right the dealerships here dont work on ob1 they dont know how the techs are to young and Peter on the diagnostic port underneath the cover is a diagram that most of people would like to know what the wires you are connecting to te1 to e1 ect this one to that one is where I gave up again but I will admit its a damm good car ive replaced all the sensors distubutor and cap wires plugs motor mounts fuel filter tires cv axles trans flush tps got a fsm get 35mpg now to cut off the roof
Noted 👍
Da
The same for 4efe
Yes
My is 4efe 1.3litre iac mechanical not electrical .wil it works ?
Next time do a closer look this video is worthless since i couldn't appreciate where you connect the cables.
Thanks for comment 😀👍
hi sir,
my corolla 2008 is over acceleration.
how to solve the problem?
please help me
Too much power ?
Peter Finn yes sir
the vehicle is gone 60 klmtr speed with out use accilater
Ok, maybe gas pedal wire cable or throttle body is in corrosion?
throttle body checked. its no complaint.
I think speed sensor complaint.
because speed sensor remove the plug. Then the engine is normal. sound.
Save me brother
Thanks Sir 😀👍
Not happy.
Hi and Thanks for feedback. :-)