Chuck, your instructional videos have been a god send in my journey to doing leatherwork. It cannot be overstated how your energy levels and excitement on the camera has encouraged me to do a lot of projects and techniques.
Thanks so much for the instructional videos Chuck! I love your enthusiasm and attention to detail. Your videos have been so helpful as I continue my journey in leather work and I can't wait to try this pattern!
I have a LVAD and the bag is a cross body bag. It weighs about 14 pounds and is hard on my neck. This gives me some great ideas t make a different bag. Thank you.
Question: where would you place a D for keys, or do you think that the O ring will be ok, not to much wear to the strap? Thank you, will try one of these for work.
I like the design but the pattern pieces do not work together as is. If you compare the shape of the pattern piece 2 with the zipper to what was created in the video it is not the same. Be aware before you start cutting your leather. Piece 2 will not fit as is.
Yes, I noticed the same thing. I went back and checked printed dimensions and measured to make sure printout was correct. It was all correct - pattern piece 2 is too large to fit on piece 1. Fortunately it is too large instead of too small - so at least I can cut down piece 2 to fit appropriately.
Bonjour, je n arrive pas à imprimer le modèle avec les bonnes dimensions. Par exemple, au lieu de 24.13 cm sur la page 1 j ai 21.1 cm. Le fichier 2 est plus large que le 1. Il faut peut être que je change le format d impression. Mais lequel choisir ? Merci pour votre réponse. Cordialement
Wondering who named the shortie and wondering what they consider to be "average" in their experience...lol Ps instant fan. makes this project seem so much more manageable! Thank you so much. Following for sure. This may just be the most perfect video on the internet 😆
Hi there, if you click the link below and at the top of the page where the video is, click view more. All of the pattern pieces can be downloaded from there. www.weaverleathersupply.com/collections/leather-hip-pouch
Спасибо Вам добрый человек за Ваш труд. Очень качественный контент. Случайно попал на Ваш канал и после просмотра видео однозначно подписался. Желаю Вам удачи и всего хорошего!
@david frank It's about aesthetic and edges are not "sharp" anymore so comfort too (especially if this edges goes into a crease, for example, it could hurt with time !^^)
It never dawned on me that I can just rip my tape…. I seriously thought it would just mess up and have been carefully cutting it with a razor. Not any more
Chuck, your instructional videos have been a god send in my journey to doing leatherwork. It cannot be overstated how your energy levels and excitement on the camera has encouraged me to do a lot of projects and techniques.
Thank you so much! Glad to hear :)
Totally agree with that.
Now, that's indeed a good looking hip pouch. I'll definitely take the ball and run with it. 👌🏻👍🏻
Thanks so much for the instructional videos Chuck! I love your enthusiasm and attention to detail. Your videos have been so helpful as I continue my journey in leather work and I can't wait to try this pattern!
this is a guuuud one!!! very nice chuck, as always appreciate the TAR outta your loving attention to leathercrafting!!
Thank you so much!
I've just been introduced to my next project. Thank you for the video.
Hope you enjoy it!
Beautiful work
I have a LVAD and the bag is a cross body bag. It weighs about 14 pounds and is hard on my neck. This gives me some great ideas t make a different bag. Thank you.
Nice pattern. Thank you for sharing
Another great video Chuck!
Thank you!
I love your videos.
gracias saludos desdee el Perú.
Nice work
Thanks!
Good overall design but I would have made the open pocket top piece a little larger at the opening so it pops open for no look retrieval.
Gracias
Question: where would you place a D for keys, or do you think that the O ring will be ok, not to much wear to the strap?
Thank you, will try one of these for work.
I like the design but the pattern pieces do not work together as is. If you compare the shape of the pattern piece 2 with the zipper to what was created in the video it is not the same. Be aware before you start cutting your leather. Piece 2 will not fit as is.
Yes, I noticed the same thing. I went back and checked printed dimensions and measured to make sure printout was correct. It was all correct - pattern piece 2 is too large to fit on piece 1. Fortunately it is too large instead of too small - so at least I can cut down piece 2 to fit appropriately.
Bonjour, je n arrive pas à imprimer le modèle avec les bonnes dimensions. Par exemple, au lieu de 24.13 cm sur la page 1 j ai 21.1 cm. Le fichier 2 est plus large que le 1. Il faut peut être que je change le format d impression. Mais lequel choisir ? Merci pour votre réponse. Cordialement
I like it 👌
Wondering who named the shortie and wondering what they consider to be "average" in their experience...lol
Ps instant fan. makes this project seem so much more manageable! Thank you so much. Following for sure. This may just be the most perfect video on the internet 😆
So to sew leather a walking foot is required on a machine.
Hey Chuck! I was thinking about making this out of a veg tan leather? All the budget is allowing atm, was wondering if it would be suitable?
Absolutely, that should work just fine!
Nice project. I see you’re getting sewing time on the sewing machine.
Hi Chuck, I love this project. Can you tel me how can I get the pattern?
Hi there, if you click the link below and at the top of the page where the video is, click view more. All of the pattern pieces can be downloaded from there. www.weaverleathersupply.com/collections/leather-hip-pouch
@@WeaverLeatherSupply Thank you very much. I Will try to do for my own use. Thank you again.
I have idea for next project. Leather harness for two cameras.
We will add this to the list of potential future project videos! Thank you
Спасибо Вам добрый человек за Ваш труд. Очень качественный контент. Случайно попал на Ваш канал и после просмотра видео однозначно подписался. Желаю Вам удачи и всего хорошего!
so no need to bevel and burnish the edges?
If you don't want to do it, it's ok : the bag will still work. But it will look less professional.
Always do it 😊
@@plumhtv3891 just thinking for my own use. But what is the purpose for beveling and burning??
@david frank It's about aesthetic and edges are not "sharp" anymore so comfort too (especially if this edges goes into a crease, for example, it could hurt with time !^^)
very inspiring. I shall make one for my scissors
Great idea!
It never dawned on me that I can just rip my tape…. I seriously thought it would just mess up and have been carefully cutting it with a razor.
Not any more
🥰👍🔥
They call an open pocket like that a Slip pocket
your pattern is wrong and missing some items.
What item is missing?