My z1ooo with various mods and changes. Arrow race headers Vance & Hines tail pipes Renthal fat bars Integrated rear light Tail tidy R&G bar ends and rad guard Short front indicators.
Love this bike! I have a 2012 in the burnt candy orange with the same Vance & Hines slip on's. So easy to power wheelie this beast! Crazy torque and fast.... I get many compliments, I'm sure you do as well. Stay safe and enjoy every mile...
Cheers. Never get tired of the look of it although I must confess the exhausts have changed and theres black panelling in place of the silver tank panels. IMO its the best looking naked bike out there at the moment (once modded of course)!
Thanks very much....its changed a little bit since then....ive lost the silver sidepanels (replaced with black) and ironically ive actually quietened it down a little bit....the exhausts were blowing a little bit (the seal between the v&h's and the headers) plus itll be getting a full set of orange samco hoses and a top end Nitron R3 rear shock. When its all on ill put up another vid.
Why thank you.....its changed a little since then (for the better) ill be putting another one up soon! - black rad sidepanels now fitted, nitron R3 shock on the rear and considering switching to a single exit pipe....
I think thats a compliment, although its a little quieter now as the insides of the exhausts have coated a little and ive fitted a block off kit....plus the speaker on my phone is a little sensitive!
No power commander. Don't use one! Find a dyno operator that's skilled enough to reflash the ecu. You get more control over the fueling and be able to do other stuff as well.
Cheers - its a bit "earsplittingly" loud though - even with the db killers in. Last night ive change the configuration to a single exit with an Austin Racing short end can....sounds loads better and a little tidier. While I like the brawlers I do find them a bit "Hot Rod" - so thought id try a single exit. I still have the centre section and the brawlers so I can switch back if I want to.
hello Mate, may I ask you what brand are those bar ends ? and of course great looking beast ! really like your style. Just own Z "14 as a second bike and working on it to quit from the stock look, so I will appreciate your comment. Have a great day !
hi matey love your bike . Any chance you can tell me when i can get front indicators like yours , are they easy to put on the bike any modification needed
I'll be putting another one up soon... I think I'm the first world wide to fit a samco hose set to this model... I sent my cooling hoses into samco and they've manufactured a set which are waiting to to go on...
Thanks and I still own it, use it most days, it's been written off, rebuilt, and is in better shape than ever. It's totally reliable, never fails to start ever and has never let me down. It's a brilliant bike and I'm on it today as my main source of transport.
Think? TBH both the SC Project and these were waaaayyy too loud....the akra has the best of both worlds - quiet at low revs and a better sounding note at the top end (even shortened by 100mm too)
Cheers - it should be sharper, and faster by tomorrow night as its dyno time...its a bit of a first as the ecu is being reflashed without the need of an additional pcv, so, im the guinea pig. Its supposed to be completed in a day but may run over...if I get the chance to get to the dyno while its being done ill put up some more video of it being thrashed...
+TK Biker The tank pad is what came on there...the bar end mirrors are made by an American company called "Driven" - I think the model is called "D-Axis" they are quite expensive though - I was going for a specific look so it was those or nothing! :) but worth it as the optics/quality of mirror reflection is really good and, if im not mistaken any spares can be bought for them if you loose anything which is handy...
Hi I have a z1000 just like you and don't know a lot about handlebars I'd like the pro taper contour Carmichael but don't know if it would fit right or should I go with renthal bar and I would like to know what are the blinkers do you have in front ? Thank you
Theres a lad on here that uses the pro taper ones (ive not heard of the make) I went with the renthal as ive known of renthal for years. Its purely your choice on which bar you go for (its down to the personal preference. I personally liked the renthals as they were in orange (theyre the ktm fitment). The blinkers on the front are led blinkers from an r6 (the r6 blinkers are teardrop in shape and fit perfectly on the mounts on the zed). You can find them very cheap on ebay.Hope that helps
Love this bike! I have a 2012 in the burnt candy orange with the same Vance & Hines slip on's. So easy to power wheelie this beast! Crazy torque and fast.... I get many compliments, I'm sure you do as well. Stay safe and enjoy every mile...
Cheers. Never get tired of the look of it although I must confess the exhausts have changed and theres black panelling in place of the silver tank panels. IMO its the best looking naked bike out there at the moment (once modded of course)!
Comfy Sofa
K k k
Comfy Sofa www dai buo mtv 1534 6789 &:@tiger?
very nice bike, tastefully modified 👍👍
Thanks very much....its changed a little bit since then....ive lost the silver sidepanels (replaced with black) and ironically ive actually quietened it down a little bit....the exhausts were blowing a little bit (the seal between the v&h's and the headers) plus itll be getting a full set of orange samco hoses and a top end Nitron R3 rear shock. When its all on ill put up another vid.
Hey, is that exsoust legal? Madnesssss...;)
beautiful sound
Whoa!What a beaut, nothing to match the Big K....thanks for sharing my good lady loves her one!
DUDE!!!! THAT SOUND!!! DAMN!!!! LOL!!!
Lovely sound🔥🔥🔥 i look like a MotoGP!! DAMN 💣💣💣😱✌👍
Why thank you.....its changed a little since then (for the better) ill be putting another one up soon! - black rad sidepanels now fitted, nitron R3 shock on the rear and considering switching to a single exit pipe....
The mirrors are d-axis made by driven. They're from the USA.
you are amazing to record the sound of exhaust
i want this so bad, the nicest z1000 ive seen!
O ronco dessa moto é diferenciado. Moto mais linda que eu já vi nada vida. Parabéns
paint are aweosome
had to clean my keyboard and monitor. Thanks!
rcnsucom
Lol
beautiful!!!! good job!
Damn, the color is awesome.🔥🔥
Cheers although it'll be changing colour soon..... A nice little old lady pulling across me means it needs a full respray....!
Parabéns meu amigo linda a sua moto sou apaixonado numa moto dessa com fé em Deus um dia ainda vou comprar uma
I think thats a compliment, although its a little quieter now as the insides of the exhausts have coated a little and ive fitted a block off kit....plus the speaker on my phone is a little sensitive!
Its like u r about to unleash a beast
No power commander. Don't use one! Find a dyno operator that's skilled enough to reflash the ecu. You get more control over the fueling and be able to do other stuff as well.
Well, if you want that exact sound then that setup (at that time was) arrow race headers, with Vance and Hines Brawlers.
Thanks....I think the only did that colour in 2014....still own it...gets better and better..!
Cheers - its a bit "earsplittingly" loud though - even with the db killers in. Last night ive change the configuration to a single exit with an Austin Racing short end can....sounds loads better and a little tidier. While I like the brawlers I do find them a bit "Hot Rod" - so thought id try a single exit. I still have the centre section and the brawlers so I can switch back if I want to.
nice color
Theyre arrow race headers and Vance & Hines brawlers (tail pipes) although I've now switched to an Austin race can (single exit).
When video started I was scroling down, searching for some videos and then the engine started. I was like ''-WTF! It's a demon!' lol
Naturex112 yeah.... It's a bit quieter now though if you look at the other video...
please upload a test ride video. can't wait for it :))
Moto mais linda do mundo!!
Darn… the sound. The whole state would wake up to this.
Yeah...it was then...quieter now....single exit akra on there.
Well... I never noticed that! I keep promising to do another walk-around now it's changed a bit... I will do it honest...!
Do you think these arrow headers would push torque higher in the rev range on my Z1000SX.
Sure. The bar ends are r&g. Not very expensive. I've changed to a single exit Austin racing pipe... I keep meaning to do a new vid.... Soon...!
Holy shit , that bike is from different planet
Heh.... Its a fair but quieter now... Those tail pipes were too loud... Bike has changed loads since then!
Freaking loud bro..Nice
nice sound bro
PeteZ1000 Thailand cheers but it changed a lot since!
Comfy Sofa visit mine bro :)
I did! Love your wheels! :)
Comfy Sofa yeah, spent alot
PeteZ1000 Thailand Can you do a video on the wheels and the fitment as I think lots of people would love to do that modification!
N me canso de ver esse vídeo perfeita 😍
moto show de bola a mais linda já vista por mim parabéns
Do you mean move the torque or increase? Or both?
Nice mods! I absolutely love it!!!
hello Mate, may I ask you what brand are those bar ends ? and of course great looking beast ! really like your style. Just own Z "14 as a second bike and working on it to quit from the stock look, so I will appreciate your comment. Have a great day !
badass bike
THAT BIKE>
O melhor Ronco🤤🤤🤤🤤♥️♥️🔥🔥
THE BEAST !!!
Beautiful ❤️
Great bike man !! did u painted it ? or bought in that coloure ?
Eita cachoeira, tá muito agressiva 👍
hi matey love your bike . Any chance you can tell me when i can get front indicators like yours , are they easy to put on the bike any modification needed
i love that color
I'll be putting another one up soon... I think I'm the first world wide to fit a samco hose set to this model... I sent my cooling hoses into samco and they've manufactured a set which are waiting to to go on...
Sound monster
What type of power commander do you have with this setup?
Z1000 além de perfeita de linda ronco peefeitoooooooooooooo ganha de todas 4cc !
So beautifull
Did you map the injection after changing the headers?
Hooo leee shiiid
I could feel that in my chest !
I did last week too - a nice lady pulled out on me so i ended up dragging it out from underneath her car...currently being repaired...
C e louco a moto mais bonita q já vi na vida mano c doido
please a make detailed walk around this bike !
awosam Bike colour...
Полный отпад :))
Parabens pelo canal irmao.E grau mlk, mais um inscrito. sou youtuber tambem
Beauty bike
Cool Bro!!
Yep. It sure was loud...single exit akra on there now..!
That setup was arrow headers and vance and hines urban brawlers.
I love this bike
Thanks and I still own it, use it most days, it's been written off, rebuilt, and is in better shape than ever. It's totally reliable, never fails to start ever and has never let me down. It's a brilliant bike and I'm on it today as my main source of transport.
Top
The sound as good if not better than SC Project exhaust.
Think? TBH both the SC Project and these were waaaayyy too loud....the akra has the best of both worlds - quiet at low revs and a better sounding note at the top end (even shortened by 100mm too)
HELLO THERE :)) I just want to ask you about your mirrors can you tell me about it ? thanks.
Yep!
Linda demais essa moto😎
A moto mais linda do mundo 🌎
Nice
ミラー変えただけで、
イタ車っぽくて、さらにカッコイイ！
I have no idea what youre saying but thanks...(im assuming its good!)
The front or rear section...?
Goodness
Caraka mais uma vez aq vendo essa coisa linda kkkkk
Actually, sorry, to correct myself the model is dmr2
Isso sim e uma máquina
Muito linda show de bola
nice bike..brother
Thank you.... 8 years on I still own it!
what kind of exhaust is that?! holy shitz!!! i love that exhaust!!! please do tell me!!!!
TOU CHONADAO DAO DAO , DAO NESSE ESCAPAO
Awesome motorbike
Cheers. Still own it... It'll be getting some post winter live soon with some much needed coatings.
What the prince of this bike
Cara que moto linda perece que Deus fez ela e mandou do ceu pois moto mais linda do que a z100 nao tem
Cheers - it should be sharper, and faster by tomorrow night as its dyno time...its a bit of a first as the ecu is being reflashed without the need of an additional pcv, so, im the guinea pig. Its supposed to be completed in a day but may run over...if I get the chance to get to the dyno while its being done ill put up some more video of it being thrashed...
q coisa linda q máquina
Que bonita!!!
Midnight club remix 3 !
its not motobike . its beast!
Real nice, where did you get the Z1000 tank pad and bar end mirrors? Cheers.
+TK Biker The tank pad is what came on there...the bar end mirrors are made by an American company called "Driven" - I think the model is called "D-Axis" they are quite expensive though - I was going for a specific look so it was those or nothing! :) but worth it as the optics/quality of mirror reflection is really good and, if im not mistaken any spares can be bought for them if you loose anything which is handy...
Best sound....😘😘😘😘😘
Cheers. I really need to do another vid...promise I will!
Nice bike
Cheers. Best bike I've ever had. Better now as it just got an upgraded clutch!
That Bass
Can u tell me please where did u get that headers ?
Hi I have a z1000 just like you and don't know a lot about handlebars I'd like the pro taper contour Carmichael but don't know if it would fit right or should I go with renthal bar and I would like to know what are the blinkers do you have in front ? Thank you
Theres a lad on here that uses the pro taper ones (ive not heard of the make) I went with the renthal as ive known of renthal for years. Its purely your choice on which bar you go for (its down to the personal preference. I personally liked the renthals as they were in orange (theyre the ktm fitment). The blinkers on the front are led blinkers from an r6 (the r6 blinkers are teardrop in shape and fit perfectly on the mounts on the zed). You can find them very cheap on ebay.Hope that helps
😍😍😍😍
Vai ser linda assim lá no meu quintal 😍😍😍😍😍😍😍😍😍😍