2016 Kawasaki Z1000 Modified Stock Exhaust Sound
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Heavy modified Gen4 Z1000 stock exhaust. Removal of the pipes inside the mufflers. Sounds a tad louder in person than in video, but way better than stock.
Instructions on how to do modify your stock exhaust:
imgur.com/gall...
Instructions: imgur.com/gallery/Vq0jHB9
I love you! Been looking for this for a wile now!... my new z1000sx will sound awesome at not expense
Music to my ears, wish I could afford one.
Thanks. you can and will buy one, they are not that expensive used. You can buy used for 5-6k good condition. Depending where you live of course.
I love this sound
Nice sound
Awesome man. Hope to see its flyby sound
Sound of god
Full sound
Maqyinaaaq
I'd love to see you try the stock can without DB killer with an aftermarket header (akrapovic/arrow).
Beautiful motorcycle 😍😍😍
Thanks, However I no longer have it, I bought Ninja 1000 few months back.
@@NoNegotiations congratulations 🎊
base😍😍😍
Nice
Hey ! Try Y pipe titanium
ما شاء الله ❤️
Love it bro ♥️
kumarjit saha you are a good man bro !
Please can you send me detail instructions on how you did this step by step many regards
Check out forum post I did: www.z1000forum.com/forum/z1000-appearance-modifications/172114-gen4-14-z1000-stock-exhaust-moded.html#post2210074
*You may need to create account to see the images.
Public post if you still need it.
imgur.com/gallery/Vq0jHB9
@@NoNegotiations how much the price of this bike?
@@vtggas_2958 Please check my other video, that has for sale on it. $7000 currently.
bliiliant work.. i dont think anyone has done this before u.. can this be done in 2019 kawasaki z100sx? also do u have the video of entire porcess?
This can be done on any bike that has this exhaust. Instructions: imgur.com/gallery/Vq0jHB9
@@NoNegotiations thanks.. I saw the images.. A video of the same will be more helpfull to lot of people as u r the first one to do this.
@@naemanmalik6107 I don't have another exhaust I can do this to. ;) I would definitely do it.
Does this modification damage the engine or is this safe modification? Have u removed the catalytic converter
It doesn't damage anything, you're just removing 2 pipes inside the exhaust to make it louder. Everything else is stock.
@@NoNegotiations Thanks buddy
video pls how to remove the silencer?
check out z1000forum I posted: www.z1000forum.com/forum/z1000-appearance-modifications/172114-gen4-14-z1000-stock-exhaust-moded.html#post2210074
You may need to register for free account to see the images.
Public post if you still need it.
imgur.com/gallery/Vq0jHB9
😍😍😍👍
Nice! Where did you find that plate holder, mate? I couldn’t find it anywhere.
Or how did you make it if it was DIY?
Drilled 2 holes in the plastic that hold the battery inside. If you find very flat bolt, you can do the same. However, be very careful, because when you sit on the bike, tire completely hides the plate and no one from behind can see it, unless you really close to the bike.
Price for used one...
Hard to find these right now. Depends on mileage, I would say between 7k-10k right now.
DO NOT DO THIS ON THE 2018+ models!..... today I opened my 2019 end cans and to find out they had redesigned the welding.... it truly is one piece now and you will fuck up everything if you start doing this... I now have to pay someone just to weld the top 3 dots back from the cap overall waste of time and money. :(
If you know how to weld, you will be fine. This is not for people who think it's 20min job.
Hey the pictures you attached on the forum are not visible to random people. Can you post them someplace else or email them to me?
imgur.com/gallery/Vq0jHB9
👍
#Jayz1000
Hey nice sound! I am doing the mod on my 2014. I don't see in your instructions the step were you remove the metal mesh inside (what holds the fiberglass) How did you manage to cut the tubes? Did you have to cut the mesh all around and then welded back? Thx
Yes, cut the mesh and open it. You can if you want to put the mesh back afterwards with just few spot welds, but it's not necessary, it's up to you. All depends if you putting fiberglass back.
@@NoNegotiations thanks! Makes sense!
Sir can we order that stuck exhaust
You can't order it. Its self-modified. see Instructions: imgur.com/gallery/Vq0jHB9
What welding you applied?
Not sure I understand you? You mean putting back the exhaust together?
I mean what type of welding you applied(use) to stick lid with outer cover together? Because the stainless steel lid & cover is too thin ..
@@palakpatel3451 Regular weld, not stainless. I don't have stainless welder. So, what I did was I welded with regular welder 'metal' and since for the most part you will not see any welding anyways, I used masking tape and painted the welding spots 'only' with high temp silver or black. Any welding you do you won't see it. Picture 3 & 4 you can see I painted with high temp flat black paint so that it doesn't rust: imgur.com/gallery/Vq0jHB9
Hey buddy,
Is it a lot of work to do this mod?
Thanks 👍
Check out the forum I posted: www.z1000forum.com/forum/z1000-appearance-modifications/172114-gen4-14-z1000-stock-exhaust-moded.html#post2210074
Public post if you still need it.
imgur.com/gallery/Vq0jHB9
Full titanium more better
I agree. I can't spend that money tho, too much. Just get Akrapovic exhaust.
m.th-cam.com/video/xyCU_pTJ8bY/w-d-xo.html
stock are better
It is stock, I just removed everything from the muffler to make it a bit louder.