I´m very happy with my MG-30!!! I hope that in future updates NUX can improve the algorithm to modify the pitch of the whammy or maybe even make a dedicated pedal like THE DROP from Digitech or the VIRTUAL CAPO used on Line6 processors, nowadays a lot of different tunings are used and it would be great to have something well, the whammy pedal can do this function but definitely the algorithm used introduces a lot of artifacts, with the power of this unit, I'm sure much better results can be achieved! Please think about it!!!!
Thanks for the suggestion. For future reference, you don't need to copy and paste the same question or suggestion into two videos. We'll see both of them, I assure you.
volume controller to do amp gain and delay feedback, And multiple C switch or remote switch to do two function at the same time eg press control switch turn off delay and turn on reverb or other. Two or more function on each control. Please keep up the good work supporting MG 30
Please update additional setting about Global output...for example L Output Cab ON,R Output Cabinet bypass,use for direct into front or rear Gtr Amp..so we can send L output Cabinet On using DI box to FH..good for live situation..
multi-octave shimmering would sound great with some tapedelay-ish roll off in the high frequencies to smooth it, if possible a parametric EQ for the Reverb and delay section. Great sounding device, especially with a little turned back volume poti
Please add simple polyphonic pitch shifter to be able to downtune guitar (transpose ). That is the only function missing for MG30 to be professional high class fx unit imho..
Should be all in the PDF manual ..... Please. ... But thx awsome unit awesome price .... Awesome sound..... I've got one.... Keep up the good work .....add loop saving to PC (copy if possible) would be awsome thx.....
Thanks for the video. The NMP2 assignment of A and B applies to all three scenes or we can change it by scene? Also, can the NMP2 be configured so that A and B move in blocks of 4 patches (banks) and foot switches form left to right can be assisted to patch A, B, C and D (double press)?
@@Alejozul No they did not reply but I found out how to do it. Just go to any effects, eg Comp and hold the button and it will change to a different type of effect.
@@nuxaudio Would be great if the rotary knob could do everything for naming the patches just like the line6 Helix. Super fast name writing and deleting it too. Thankyou 😊🙌🏻
I would like to make a modulation to be enabled only while I'm pressing down CTRL1, and as soon as I release it, I would like the modulation to be turned off. Is there a way to do that?
I am surprised it doesn't have a metronome , but I think Nux can easily add this with future firmware updates , just add new drum category with simple 4/4, 2/4,3/4,7/8... metronome clicks
Hi, but in the hidden functions knobs 2 controls the bpm of what? If you move it it doesn't change the bpm of the looper, it doesn't affect the delays, it's not clear what changes. Thank you
Nice video, thx! Hopefully this unit arrives very soon in Europe. The MG-300 is great, but this is a little bit better with more switch possibilities.Not to mention the better sound from HD to 2K!
hey man. i noticed on my nux that u can use 2 mod at the same time.. 1 mod the other one is efx. but when i press the efx, all i can see is mod like flanger.. so how can i change the efx to be efx?
Thank you for this information. I received my MG-30 yesterday, and when I am on high-gain settings, the ground-buzz sound is extremely loud. Is that a problem with the unit or the power supply? I have it plugged into a furman power conditioner. Can I use a different power supply? I have a Voodoo Lab Pedal Power 4x4 that looks like it would work with the MG-30. Is that okay?
My number 2 knob won't get me to the next page when i press it. Is there anything i can do by myself to solve it or should I go to a service center? I can't set the treble and presence on any amp because of it
Hi, just curious, I would like to split my bass signal and send a dry bass signal to my bass amp and I want to send another wet signal to a guitar amp that comprises of a pitch shift of an octave up sent to another pitch shift which adds a perfect 5th to that 1 octave up signal with no dry bass signal then into some distortion so I can send this wet signal to the guitar amp when the guitarist does his solos, to fatten the sound a little as we don't have a rhythm guitarist to do this. Does this unit have these capabilities?
Can you assign the exp pedal A and B to different scenes? Example:- Switch A assigned to Scene 1 and B assigned to Scene 2 and the CRTL switch assigned to scene 3.
Does it have a snapshot/scene feature like in the Helix and Headrush units wherein inside a preset, you have options to tweak different parameters or turn off effects instead of loading presets
I have a question, is the amp model block, is the power amp section separate from pre-amp? If yes, I would like to use my external preamp and use in MG-30 just power amp section and IR for cab. Please let me know, thank you!
Is that a glitch on the screen top right - it looks like a little arrow? I noticed it on mine and thought that it was a display fault, but I see it on your unit, too.
Hi! Thanks for the video, I had no idea about those functions! I have my NUX MG-30 for a few days now and I'm stunned - it's a wonderful device and it's perfect for my needs. Couple of things I miss is storing the drum machine settings (tempo and volume) and also - is there a way to increase overall drum machine volume? Even if i turn it's volume to MAX, most presets are still more loud than drums. Last thing I miss is a simple metronome like it was in MG-300. Anyway, MG-30 is great, thanks!
Hi, can it somehow sync the midi clock from another device? Can it receive midi clock anyhow? For example sync delay tempo. Maybe from pc via USB? Also Can I set global tempo? So when I browse from presets it keeps the tempo. Thanks.
Cómo hacer para crear un preset de ritmo con distorsión y otro con booster para aumentar el volumen en el solo, sin cambiar de presets? Los pedales de booster no aumentan el volumeb y siempre tengo prendido el overdrive
Hi. Could You add another output mode which skips the global equalizer? When we connect mg30 to the amp's fx return to use power amp the output isn't flat and still it is better to use studio out mode and apply equalizer and switch off ir than use stack rear mode! All other 4 modes beside studio are pointless unfortunatelly... We need to use eq to straighten the global equalizer on studio mode to get the best results. They would be even better with flat mode and ir switched off globally.
Saya mau tanya pak....bagaimana cara mengatur agar dellay pada saat volume di tutup di posisi nol...tetapi dellay nya masih bunyi atau hidup...sedangkan pada efek nux mg30 ini ketika volume di tutup atau di matikan..semua modul dan dellay juga ikut mati..demikian pertanyaan saya...terima kasih..kalo bisa buat tutorialnya
I've had mine for about 2 weeks now and love it but I have 2 questions. First, is there a way to switch between factory presets and user presets without using the Quick Tone software. For example, If I create a user preset in slot 28A using the software, I can save it and then switch back and forth between the user preset and factory preset clicking on the upper left icon in the software. However, once I save a user preset in a slot it seems only the user preset can be selected from the pedal and the factory preset in the same slot can now only be selected using the Quick Tone software. Also, if I save a user preset in a slot and rename it, it also renames the factory preset in the list. The factory name will still show up in the display, but in the list you can only see the new name whether you are in user or factory mode so there is no way to remember what the factory preset was when searching for a particular preset. Shouldn't the list display the preset name depending on which mode (factory or user) you have selected? Is this a bug that needs to be corrected in a future software update? Second issue is that on the CE-1 chorus modulation pedal only the chorus side seems to be working. The chorus/vibrato switch doesn't seem to function, as well as the high/low switch and level control. Is this intentional or a bug in the software? Also if this is intentional, are there any other effects that aren't fully functional. I haven't had a chance to try them all yet.
@@bangtoni2560 Thanks for the reply. Works like a charm. Couldn't find that in any documentation. Now if they would only add an auto wah effect in the next firmware release that would make me quite happy.
Bonjour, sur le site, on voit qu'on peut faire un réglage des basses des médiums et des aigus pour la batterie. Je ne trouve rien dans le mode d'emploi. Comment faut il faire pour accéder à ce réglage? Cordialement.
Please Fix Quick Tone, Many users are complaining that even though the MG-30 is "Pugged In" with the USB cable that came in the box, it keeps asking, Plug in Your Pedal. Please do not tell me to upgrade my firmware. I Have Done That!!! Quick Tone still keeps asking "Plug In Your MG-30" Then Quick Tone "Reboots" and starts asking all over again. This goes on forever!!! HELP!!!!!!!
hello everyone, total 5 footswitches (including 2 external). My preference is stompbox mode. Can this be done with nux mg30? 1 delay 1 boost (eq or comp) 1 chorus 1 overdrive/distortion 1 reverb --- 5
I wanted to buy one for about two weeks now and I can’t find it for sale. You have a buyer ready in USA with money in hand. Like the saying goes - help me help you! Ha
They are JUST now arriving in the US, i did a pre-order through Scott the PedalGuy on Reverb, and he has been great to work with. here is a link to his reverb listing: reverb.com/item/39355901-nux-mg-30-versatile-modeling-guitar-processor Mine is supposed to arrive in a few days, super excited!
@@Exsomos I finally got it figured out. I got to play it all day and pretty much like it and then today I got informed that the wrong unit was sent, that it was meant for the Chinese mainland. Good thing I unboxed it carefully. I hope I don’t have to pay for shipping but I guess I’ll figure that out. I think the next one will be coming locally from the pedal guy
This is a must watch since the manual has virtually no useful information. Thank you.
Everything is hidden in this thing 🤣🤣, the manual is useless
I´m very happy with my MG-30!!! I hope that in future updates NUX can improve the algorithm to modify the pitch of the whammy or maybe even make a dedicated pedal like THE DROP from Digitech or the VIRTUAL CAPO used on Line6 processors, nowadays a lot of different tunings are used and it would be great to have something well, the whammy pedal can do this function but definitely the algorithm used introduces a lot of artifacts, with the power of this unit, I'm sure much better results can be achieved! Please think about it!!!!
Thanks for the suggestion. For future reference, you don't need to copy and paste the same question or suggestion into two videos. We'll see both of them, I assure you.
Second that
Please.. do something to make transpose on guitar chord easier..
volume controller to do amp gain and delay feedback, And multiple C switch or remote switch to do two function at the same time eg press control switch turn off delay and turn on reverb or other. Two or more function on each control. Please keep up the good work supporting MG 30
Please update additional setting about Global output...for example L Output Cab ON,R Output Cabinet bypass,use for direct into front or rear Gtr Amp..so we can send L output Cabinet On using DI box to FH..good for live situation..
That was one of the first thing i was confused about, a missed opportunity to shine
This is a feature they have on the NUX Amp Academy. I wonder if they can add this on the MG30.
multi-octave shimmering would sound great with some tapedelay-ish roll off in the high frequencies to smooth it, if possible a parametric EQ for the Reverb and delay section. Great sounding device, especially with a little turned back volume poti
I just my NUX MG-30 and cannot select the wah function. Can anyone help?
Must watch video of you have this unit ! Thank you !
Great info video 👍 , Please make more video on how to assign the added Two pedal foot switch.
Nux, we love what you do but we need a better manual.
I am so technically challenged at this time old age!! This is going to take a while. Thank you very much for your great tutorials.
Please add simple polyphonic pitch shifter to be able to downtune guitar (transpose ). That is the only function missing for MG30 to be professional high class fx unit imho..
Thank you so much for sharing this video, it is very useful.
Thanks a lot Jonathan. Great Video ! Many greetings from Germany.
Should be all in the PDF manual ..... Please. ... But thx awsome unit awesome price .... Awesome sound..... I've got one.... Keep up the good work .....add loop saving to PC (copy if possible) would be awsome thx.....
Does it have a spillover function? Do the reverb and delay continue to sound when switching presets?
Hi. Can you do multiple routing in MG30?
Example Left output has amp sim & Right output has no Cab sim?
Thanks
Check today’s YT short for the answer
NUX MG 30 FAQ | Signal Routing
@@nuxaudio thank you!
Victory belongs to those that believe in it the most... and believe in it the longest.
Please post a video how to use the looper/drum machine and how to load patches and IR. Thank you in advance
Thanks for the video. The NMP2 assignment of A and B applies to all three scenes or we can change it by scene? Also, can the NMP2 be configured so that A and B move in blocks of 4 patches (banks) and foot switches form left to right can be assisted to patch A, B, C and D (double press)?
please add attack time, knee type, and peak/rms to the studio comp
and allow 2 comps in a chain
hoping for the next update
Hi, is it possible to put two time the same type effects in the chain ? Thanks
Yes you can! Check today's YT Short where I will show you how.
How to transpose the violin while using nux mg 32...(or Whammy setup for transpose) ?
i hope future's update to be able to use preset mode in one patch. that would be the perfect pedal version of all time!!
Is it possible to assign different functions to the UP and DOWN switches? Would be great but can't find the way!
Hi, may I know how do I assign 2 blocks of Overdrives? For example, I would like to have a Tube Screamer going into a Blues Driver. Thanks
Hi Y T. Do you solve this inquiry? Now do you know if that is possible? Many thanks
@@Alejozul No they did not reply but I found out how to do it. Just go to any effects, eg Comp and hold the button and it will change to a different type of effect.
@@YT-oy3km its been a year but thank you so much
Please make a video on writing the patch name that we create on board. I found it very tricky and I couldn’t name my patch preset
Great suggestion!
@@nuxaudio Would be great if the rotary knob could do everything for naming the patches just like the line6 Helix. Super fast name writing and deleting it too.
Thankyou 😊🙌🏻
VERY INTERESTING TUTORIAL. IT SEEMS THERE IS AN HARMONIZER IN MG 20. AM I RIGHT. IF SO IS THERE ON IN MG30?
I would like to make a modulation to be enabled only while I'm pressing down CTRL1, and as soon as I release it, I would like the modulation to be turned off.
Is there a way to do that?
How many effects can be used at a time while making a single patch?
Plz reply
Hello! For use in a live show with the mg30 on the floor, would you know how to switch presets using one of the foot switches? Thanks in advance.
Can you assign two different amps or cabinets for R and L channels?
I am surprised it doesn't have a metronome , but I think Nux can easily add this with future firmware updates , just add new drum category with simple 4/4, 2/4,3/4,7/8... metronome clicks
Thanks for the suggestion
Hi, but in the hidden functions knobs 2 controls the bpm of what? If you move it it doesn't change the bpm of the looper, it doesn't affect the delays, it's not clear what changes. Thank you
Nice video, thx! Hopefully this unit arrives very soon in Europe. The MG-300 is great, but this is a little bit better with more switch possibilities.Not to mention the better sound from HD to 2K!
Is it possible to sound left and right separately?
hey man. i noticed on my nux that u can use 2 mod at the same time.. 1 mod the other one is efx. but when i press the efx, all i can see is mod like flanger..
so how can i change the efx to be efx?
Thank you for this information. I received my MG-30 yesterday, and when I am on high-gain settings, the ground-buzz sound is extremely loud. Is that a problem with the unit or the power supply? I have it plugged into a furman power conditioner. Can I use a different power supply? I have a Voodoo Lab Pedal Power 4x4 that looks like it would work with the MG-30. Is that okay?
Great video ! Thanks 😊. I can’t wait to get mine in a few weeks
so you can edit on the pedal itself, on the spot? because I always see in other vlogs that they make patches on the computer, thank you

Is it possible to assign a switch for a universal volume boost?
Thank you Jonathan!
Anyone know what the "Sub D." line of parameters is for? I couldn't distinguish any difference in the sound/effect putting it on different positions
Super ! thanks !
Our pleasure!
Im good thankyou, how are you?
My number 2 knob won't get me to the next page when i press it. Is there anything i can do by myself to solve it or should I go to a service center? I can't set the treble and presence on any amp because of it
Okay but all this can be found out if you use it longer than 30min ;) anyway it's a very usable piece of gear, i like mine at least...
😎
Can we change order of the signal chain ?
Yes
Hi, just curious, I would like to split my bass signal and send a dry bass signal to my bass amp and I want to send another wet signal to a guitar amp that comprises of a pitch shift of an octave up sent to another pitch shift which adds a perfect 5th to that 1 octave up signal with no dry bass signal then into some distortion so I can send this wet signal to the guitar amp when the guitarist does his solos, to fatten the sound a little as we don't have a rhythm guitarist to do this. Does this unit have these capabilities?
have you ever face any issues like technical error or else regarding this unit?
Thank you!
Can you assign the exp pedal A and B to different scenes? Example:- Switch A assigned to Scene 1 and B assigned to Scene 2 and the CRTL switch assigned to scene 3.
Does delay/reverb trails spillover work in this unit?
Hi bos.. When Nux MG-30 New Firmware V3?
Please post more videos for idiots like me to watch. I cant wait go get mine
Does it have a snapshot/scene feature like in the Helix and Headrush units wherein inside a preset, you have options to tweak different parameters or turn off effects instead of loading presets
Yes it does now. Make sure you update to the latest firmware.
I have a question, is the amp model block, is the power amp section separate from pre-amp? If yes, I would like to use my external preamp and use in MG-30 just power amp section and IR for cab. Please let me know, thank you!
Amp Model combines Preamp & Power Amp section.
@@nuxaudio Thank you!
I also would like to use only power amp when using a pre amp pedal
Is the tempo global? Or can it be assigned and recalled per scene/preset?
Is that a glitch on the screen top right - it looks like a little arrow? I noticed it on mine and thought that it was a display fault, but I see it on your unit, too.
Yes that's there. I was wondering too why
@@sunchylde Oh well, it may be removed in a future update... or not! It hardly matters...
Hi! Thanks for the video, I had no idea about those functions! I have my NUX MG-30 for a few days now and I'm stunned - it's a wonderful device and it's perfect for my needs. Couple of things I miss is storing the drum machine settings (tempo and volume) and also - is there a way to increase overall drum machine volume? Even if i turn it's volume to MAX, most presets are still more loud than drums. Last thing I miss is a simple metronome like it was in MG-300. Anyway, MG-30 is great, thanks!
Hi can it do two amps and cabs ? Parallel effects blocks
@@pratyulmusic Hi, I guess you can't do that. As far as I know, the parallel connections works only for DLY, RVB and MOD.
Can you parallel 2 amps?
Hi, can it somehow sync the midi clock from another device? Can it receive midi clock anyhow? For example sync delay tempo. Maybe from pc via USB?
Also Can I set global tempo? So when I browse from presets it keeps the tempo. Thanks.
Can you use the CTRL switch as your dedicated (global) tap tempo in all the patches?
Cómo hacer para crear un preset de ritmo con distorsión y otro con booster para aumentar el volumen en el solo, sin cambiar de presets? Los pedales de booster no aumentan el volumeb y siempre tengo prendido el overdrive
Hi. Could You add another output mode which skips the global equalizer? When we connect mg30 to the amp's fx return to use power amp the output isn't flat and still it is better to use studio out mode and apply equalizer and switch off ir than use stack rear mode! All other 4 modes beside studio are pointless unfortunatelly... We need to use eq to straighten the global equalizer on studio mode to get the best results. They would be even better with flat mode and ir switched off globally.
Saya mau tanya pak....bagaimana cara mengatur agar dellay pada saat volume di tutup di posisi nol...tetapi dellay nya masih bunyi atau hidup...sedangkan pada efek nux mg30 ini ketika volume di tutup atau di matikan..semua modul dan dellay juga ikut mati..demikian pertanyaan saya...terima kasih..kalo bisa buat tutorialnya
How is it possible that the CTRL blink regularly with the tempo
Is it possible to set a global Tempo constant when changing preset
Anyone tried it direct to studio monitors?
It's supposed to have a setting just for that.
Is it possible to change the language
From Chinese to English?
Hi everyone, I bought Nux MG-30 in China so the setting’s language is in chinese, how to change it to english, please help me!
I've had mine for about 2 weeks now and love it but I have 2 questions. First, is there a way to switch between factory presets and user presets without using the Quick Tone software. For example, If I create a user preset in slot 28A using the software, I can save it and then switch back and forth between the user preset and factory preset clicking on the upper left icon in the software. However, once I save a user preset in a slot it seems only the user preset can be selected from the pedal and the factory preset in the same slot can now only be selected using the Quick Tone software. Also, if I save a user preset in a slot and rename it, it also renames the factory preset in the list. The factory name will still show up in the display, but in the list you can only see the new name whether you are in user or factory mode so there is no way to remember what the factory preset was when searching for a particular preset. Shouldn't the list display the preset name depending on which mode (factory or user) you have selected? Is this a bug that needs to be corrected in a future software update? Second issue is that on the CE-1 chorus modulation pedal only the chorus side seems to be working. The chorus/vibrato switch doesn't seem to function, as well as the high/low switch and level control. Is this intentional or a bug in the software? Also if this is intentional, are there any other effects that aren't fully functional. I haven't had a chance to try them all yet.
holding down the KNOB 4.
@@bangtoni2560 Thanks for the reply. Works like a charm. Couldn't find that in any documentation. Now if they would only add an auto wah effect in the next firmware release that would make me quite happy.
Bonjour, sur le site, on voit qu'on peut faire un réglage des basses des médiums et des aigus pour la batterie. Je ne trouve rien dans le mode d'emploi. Comment faut il faire pour accéder à ce réglage?
Cordialement.
Excuse me I want to ask that my NMP-2 foot switch doesn't work if I press A button. What step do I miss? or what is the problem? does it broke?
I think if you’re plugged into A, only A works, and if you’re plugged into B, then A&B both work?
@@LTJR. I've solved the problems😁.
Thanks for your reply.
The problem is my cable.
It needs special type for NMP to activate the function B&A.🤣
@@wangasen9971 glad you got that worked out.
Why when scroll encoder I view a List of preset and non scroll preset. Es 1A, 1B etc.
how do you set the delay times to match the tempo? I note the SUB D button on the delays but without matching it to the tempo it's not much use
can you do this with mg 300?
how to activate epression pedal to wah?i still cannot get it..
Please Fix Quick Tone, Many users are complaining that even though the MG-30 is "Pugged In" with the USB cable that came in the box, it keeps asking, Plug in Your Pedal. Please do not tell me to upgrade my firmware. I Have Done That!!! Quick Tone still keeps asking "Plug In Your MG-30" Then Quick Tone "Reboots" and starts asking all over again. This goes on forever!!!
HELP!!!!!!!
Hy how Can I activeted gate
Is he calling the second knob, konb 4?
Hi. How can I save my preset sound without losing the factory preset?
You can recall factory preset by holding down the KNOB 4 under preset mode.
Please 🥺 you guys are missing a very big important thing on the mg 30 pedal. How can you put on the wAH pedal ?
Pressing it down
anyone have any idea how to power up the unit without using power adapter? (ex. using batteries/power bank)
I've powered mine using the USB to DC connector.. No need for external adapters ... Works fine !😄
Update more effects please!!!!
Thanks for the suggestion
hello everyone, total 5 footswitches (including 2 external). My preference is stompbox mode. Can this be done with nux mg30?
1 delay
1 boost (eq or comp)
1 chorus
1 overdrive/distortion
1 reverb
---
5
I can't start my mg-30 😅
I wanted to buy one for about two weeks now and I can’t find it for sale. You have a buyer ready in USA with money in hand. Like the saying goes - help me help you! Ha
They are JUST now arriving in the US, i did a pre-order through Scott the PedalGuy on Reverb, and he has been great to work with. here is a link to his reverb listing: reverb.com/item/39355901-nux-mg-30-versatile-modeling-guitar-processor Mine is supposed to arrive in a few days, super excited!
@@Exsomos yeah I just got it today. Only thing is it's in Chinese I guess and I'm trying to figure out how to change the language to English
@@LTJR. oh no! Hopefully you can figure that out. I don’t think I’ve even seen a language option while goofing off with mine…
@@Exsomos I finally got it figured out. I got to play it all day and pretty much like it and then today I got informed that the wrong unit was sent, that it was meant for the Chinese mainland. Good thing I unboxed it carefully. I hope I don’t have to pay for shipping but I guess I’ll figure that out. I think the next one will be coming locally from the pedal guy
This would be so much more helpful if you were able to speak English at all.. I can't understand a word you say throughout this entire video, ese..
Patch on.. Patch off
砍錯...